Having problems with your Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum ?

Dyson ball not picking up properly and very noisy


Answers :

Is the beater brush spinning? Is the sole plate that is removable and covers the bottom side of the beater brush housing installed properly such that there are no gaps between it and the housing? Is the hose that connects the beater brush housing to the canister connected or have any holes in it?
Repair Help & Product Troubleshooting for Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson ball not picking up properly and very noisy


Is the beater brush spinning? Is the sole plate that is removable and covers the bottom side of the beater brush housing installed properly such that there are no gaps between it and the housing? Is the hose that connects the beater brush housing to ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

My Dyson DC17 has lost suction on the wand and is not picking up dirt as it should. I have taken the small part at bottom of the machine off to see if there is a blockage--none that I can see. The flexible tube on wand is very tight and won't extend very much. Dyson sent me a new cyclonic part in April but the machine still doesn't seem to be working properly. My serial number is 260-us-d11545. Is there somewhere I can take my Dyson to get it fixed. I'm very frustrated with it. Thank you.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Ive got a dc07 dyson just changed the belt on it as i had to since then it isnt picking anything up at all nothings clogged up had it to bits and put it all back together again properly. The hose is working when i take it off its got plenty suction but when i run it along the floor it picks absolutely nothing up any ideas that i havent thought off. Thanks


Sounds like the hose underneath has become detached. Have a look and if its not that come back to me. Also can yo9u check your U Bend is still on as these can come off. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have vax 1800 pet vacuum. It is picking up fine but very noisy. I have replaced the belt in the past and the noise started then. On looking at it closely today I noticed brushbar was getting worn where it slots in at the side so I suspect it wasn't fitted in properly after replacing the belt. Now in properly but still making terrible noise. There is a bit of a rubbing noise when brushbar moved round. Do you think the brushbar needs replaced? How do I lubricate the bearings to try that bef


Spray the end of the brush-bar were the bearings are with WD-40 if that solves the problem replace the bearing when it starts screeching.. ... Vacuums

My dyson ball wont pick up


You may have a blockage in the machine or the internal hose has become dislodged. Call the Dyson helpline for a thorough troubleshoot and solution. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Noisy vacuum that wont pick up properly


Your vacuum is still under warranty. Call Miele or the Miele dealer you bought it from. They are obligated to repair your vacuum. ... Miele S4210 Carina Bagged Canister Vacuum

Dyson ball 24 not picking up dirt


Hi Dorothy, it's Jack at Dyson.If your DC24 doesn't seem to be picking up as well as it should be, and you've already tried washing the filters, it's likely that your machine has a blockage. To locate and remove any obstructions, please take ... Dyson Ball DC24 Bagless Upright Vacuum

Dyson Ball DC24 brush is not spinning properly...


Check it out with dyson, they might have others with this prob, just might be under warranty or be a recall.. ... Dyson Ball DC24 Bagless Upright Vacuum

Dyson DC24 won't pick up, the ball is super hot.. any ideas?


... Dyson Ball DC24 Bagless Upright Vacuum

My dyson ball Vaccuum wont pick anything up - Vacuums


... Vacuums

Not picking up. Cant see any blockage - Dyson Ball DC24 Bagless Upright Vacuum


Hi there,\015\012\015\012You should be able to resolve this issue by following these simple steps: http://www.dyson.co.uk/support/help. ... Dyson Ball DC24 Bagless Upright Vacuum

My dc24 wont pick up - Dyson Ball DC24 Bagless Upright Vacuum


Hi Leta,I'm sorry to hear you're having difficulty with your DC24. If your machine doesn't seem to be picking up as well as usual, please follow the steps shown in our online Support guide to identify any issues: ... Dyson Ball DC24 Bagless Upright Vacuum

My dc15 is not picking up,how can I fix it - Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum


Check the changeover valve is working ok from floor to hose settings ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

My dc 24 dyson red ball is making a very loud noise ive been told to check all the hose but im struggling to take to front part off where the roller is it seems to be picking up as the canister has dirt in it thanks


Hi there,\015\012\015\012You should be able to resolve this issue by following these simple steps: http://www.dyson.co.uk/support/help. ... Dyson Ball DC24 Bagless Upright Vacuum

Hi - My dyson DC14 is not picking up properly. It starts ok but then starts making a horrible high pitched noise. Only thing we've done differently lately is **** up ash from the fireplace. Thanks


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I have a DC 15 Dyson Ball Vacuum. I've removed and cleaned the filter. I can't get the lid to close properly. I don't want to force it and break something. There is some kind of a red spring loaded tab that seems to be in the way. How do I reseal the top of the vacuum?


The red tab doesn't let the lid close if the filter is not fitted correctly or the wrong filter is fitted. Many after-market filters cause this problem. \015\012\015\012Have you recently fitted a new after-market filter? ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Dyson ball not picking up when using in upright position. I can see the roller is stuck, with carpet twine, how do I open up the case?


Look at the endcaps of the brush nozzle there will be two plastic screws to unlock them, they rotate off. the brushrolls should pull out. what is the model #? ... Vacuums

When using dyson in upright possition does not pick up very well. roller is going round. when you press front to begin hoovering carpets the front doesnt seem to drop onto floor low enough. dont think suction pipe is engaging properly !!!!!!.


Hi Peter, I'm sorry to hear you're having difficulties with your DC07. It sounds as if the internal hose may have become twisted - you should be able to resolve this by removing and replacing it as shown in the video below. Please make sure t ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do u check the pipes on the dyson ball hoover


Hi Lizzie,I'm sorry to hear your Dyson Ball isn't picking up as well as usual. The instructions for resolving this will differ according to which Dyson Ball model you own. Please visit www.dyson.c ... Dyson Vacuums

My dyson seems to have lost its suction therefore is not picking up anything yet i have found that when my dyson is standing upright it has a little more suction but nothing like how it use to work. This has only happend in the last 2 weeks. I sanded a floor & though the sander picked up majority of the dust i did use the dyson to pick up the excess and it is since then that my dyson has not been working to its full potential.


Hi there,\015\012\015\012Sorry to hear you're having a problem with your DC07. You should be able to resolve the issue by following these simple steps: ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC 25 Ball - no power to motor


Same problem here. We noticed a loss of suction for about 5 minutes and the suction stopped. Beater bar still rotates but ZERO suction. ... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson Ball Vac won't return to upright position


... Dyson Ball DC24 Bagless Upright Vacuum

Dyson ball dc24 brush will not rotate - Dyson Ball DC24 Bagless Upright Vacuum


Hi there,Your DC24 is equipped with a sensor which shuts off the brushbar if something jams it. Once you've checked the cleaner head for obstructions, and removed any threads or hair from around the brushbar, you should be able to reset the m ... Dyson Ball DC24 Bagless Upright Vacuum

Picture of reset button on dyson ball - Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum


Hi there,The advice on resetting your machine will depend on which model of Dyson Ball you own. If you have a DC15, you can reset the machine by following the steps shown in our online support guide: ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dyson ball dc24 the brush bar is not turning - Dyson Ball DC24 Bagless Upright Vacuum


Hi its Darran at Dyson. With the machine switched off, press the re-set switch on the side of the head, making sure you push the button in as far as you can. When you switch the machine back on and lower it into the vacuuming position, th ... Dyson Ball DC24 Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0453 seconds