Having problems with your Dyson DC17 Animal Bagless Upright Cyclonic Vacuum ?

My puppy chewed the cord to my dyson, is it easy to fix?


Answers :

Very easy, if you don't care how pretty it is. All you need is a sharp knife and some electrical tape. Use the knife on each end of the cord to expose 1/2" of copper wiring, twist them together, cover each wire separately with tape, then wrap several turns of tape around the whole thing.
Repair Help & Product Troubleshooting for Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My puppy chewed the cord to my dyson, is it easy to fix?


Very easy, if you don't care how pretty it is. All you need is a sharp knife and some electrical tape. Use the knife on each end of the cord to expose 1/2" of copper wiring, twist them together, cover each wire separately with tape, then wrap sever ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

How to replace electrical cord on Dyson ball vacuum cleaner. Our puppy chewed it.


Depending on where it has been chewed, you may not need to replace the whole of your cord. Ask your local electrical supplier, or possibly somewhere like B & Q, if they have an 'inline' plug and socket to repair your existing cord.this would rese ... Dyson Ball DC24 Bagless Upright Vacuum

The power cord on a flat iron broke/got chewed through and needs to be replaced. how can I open it to get at the cord or fix the cord?


... Vacuums

Fix retractable cord on dyson dc19?


... Vacuums

My puppy chewed on the cord; i can purchase a cord but how do I replace it


You'd want the repair dealer to replace the cord, they're authorized and trained to do it - there's electricity involved and you don't want to make a mistake, it'll void the warranty of your machine (if you still have one) but more than that, you can ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dog chewed through the power cord on my Dyson DC15. I have purchased a new power cord and need instructions on how to remove the old one and replace it with the new one.


... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

My dog chewed up my NEW Dyson DC14 power cord. Could someone please help me in replacing it?! I have bought the cord, and refuse to pay $24.95 for someone to put it on.


Please check out this site. It should help you replace the cord.\015\012\015\012 ... Dyson DC14 Bagless Upright Cyclonic Vacuum

Our puppy chewed through the cord on our Rainbow. we paid $45 to have the cord replaced, got it home and it still will not turn on. Any ideas? Thanks!


The service tech who replaced it didn't know what he/she was doing. That's my first guess. If it was working before the puppy chewed through the cord, then if the cord was replaced, it should work. That leads me to believe the cord wasn't installe ... Rainbow E series Canister Wet/Dry Vacuum

How to fix the cord holder on Dyson DC 33


Use a small self tapping screw ... Dyson DC-33 MultiFloor Upright Vacuum Cleaner

The cord is jammed and won't come out, is this an easy fix?


It should be, you can open it up and rethread the cord around the spool ... Kenmore 23313 Whispertone Bagged Canister Vacuum

How do i fix the retractable cord on a Dyson 08


This link shows you how to get to the motor and the rewind unit i think reparable you need to buy the full unit. gud luk.http://www.youtube.com/watch?v=3- ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

How do i fix the retractable cord on a dyson dc08 to go in all the way and not only part way?


... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

I was in the midst of vacuuming with my Dyson Animal when it stopped working. It smelled as though part of the motor burned up (there was hair and string wrapped around the brush so I stopped to remove it). Any ideas on an easy, quick, and inexpensive fix? Thank you!


Hi there,For guidance on clearing any remaining threads or hair from around the brushbar and resetting the machine, please follow the steps shown in the video below. Please note, the brushbar will never rotate when your machine is upright, so ... Vacuums

Can i fix a chewed apart cor on a vaccum cleaner or do i need to replace cord


Fix it!! with it unplugged, strip both ends of the chewed area to bare wire and then splice them back together. Wrap the splice with electrical tape! ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

My puppy chewed up power cord to Hoover Steamvac! Is it possible to replace it?


Yes, the power cord is replaceable.\015\012Please call this number, with the Model number:\015\012\015\0121.800.944.9200 ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Barrel Dyson DC08 Origin cord rewind button is stuck.


... Dyson Vacuums

How do you remove the electrical cord for a dyson


Remove the cover right above the canister. there is a couple of screws in the front holding it in. i think they are T15 torx. that will give you access to your switches and your cord ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

HOW TO REPLACE A POWER CORD ON A DYSON DC17


The quickest and best way to answer this is to ask the same question on YouTube. There are some excelent tutorials showing exactly how its done,Mike ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dog chewed through the electric cord. Can this be replaced?


... Vacuums

Dyson D25 I was vacuuming and got the cord tangled inside the vacuum dyson 25. We opened it and was able to remove the cord. But the brush stopped spinning when I use the vacuum.


Hi there,Your DC25 is equipped with a sensor which shuts off the brushbar if something jams it. Please follow the steps shown in the video below to reset the machine after checking for any remaining obstructions. You may also want to refer to ... Dyson Ball DC24 Bagless Upright Vacuum

Dyson DC07 The plastic pre filter catch snapped on my Dyson. I have a replacement already, but can't figure out how to remove the bottom of the broken one. It looks easy enough to slide/snap the new one in but accessing the old one isn't easy. What do I need to do to get it out?


Turn your dyson over so you can get to the bottom undo the screw and then you can see the bottom of the clip a gentle tap with with a screw driver blade will knock it out and the other one slips in ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My Dyson DC17 has lost suction on the wand and is not picking up dirt as it should. I have taken the small part at bottom of the machine off to see if there is a blockage--none that I can see. The flexible tube on wand is very tight and won't extend very much. Dyson sent me a new cyclonic part in April but the machine still doesn't seem to be working properly. My serial number is 260-us-d11545. Is there somewhere I can take my Dyson to get it fixed. I'm very frustrated with it. Thank you.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Hoover UH70120 WindTunnel TSeries problems with the cord. im a tech savy guy and have been trying to fix a cord after it was pulled to far out and now wont auto retract, but just cant find a way to pull the cord rewind mechanism out to work on it. Any advice


You will probably have to replace the cord winding mechanism. I have never had any luck trying to repair one. Cord retracters are great when they work but it seems like they always go bad before too long. On many units you can't even replace the cord ... Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner

Can i fix or who would fix power cord to my vaccum


Get you some electrical tape and strip and connect the proper wire colors back. But be sure to tape each wire very well before you continue to the next. After that just tape all together. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

My older dyson is so hard to push, was told there's a kluge to fix it. Where can I find that information?


... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0478 seconds