Having problems with your Dyson DC17 Animal Bagless Upright Cyclonic Vacuum ?

Hi, The dirt does not **** into the canister. It looks like the cyclone system is not working. I think something is stuck inside. How do you recommend to fix it? Thank you for all your advice. Fiona


Answers :

There is no vacuum action on your set. So as you mentiioned there is little or no suction available which means that the pump is not working correct. The two possibilities are either a large block of an object inside or the failure of the vacuuum pump.
\012You might have to dismantel the bottom to the pump to finalise on our suspect. Removing is the important part but you have to start doing it in the sequence to get access to the cyclone.
Repair Help & Product Troubleshooting for Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi, The dirt does not **** into the canister. It looks like the cyclone system is not working. I think something is stuck inside. How do you recommend to fix it? Thank you for all your advice. Fiona


There is no vacuum action on your set. So as you mentiioned there is little or no suction available which means that the pump is not working correct. The two possibilities are either a large block of an object inside or the failure of the vacuuum pu ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

We have a Singer 626 sewing machine. It's an old mechanical machine with heavy metal parts. The stitch selector was stuck, I removed the top and helped the selector to move. when I had to move the selector again, it was stuck and I pushed too hard and broke a component. I can fix the machine if I had a repair manual. I need to buy a repair manual. How and where can I get one? Thankjs Charlie PS. Im pretty mechanicly inclined and I was able to clean the machine and get it to work after


... Vacuums

Scooba 335 stuck in diagnostic mode and removing the battery does not fix the problem. Any advice?


... iRobot 5800 Scooba Vacuum

Brush bar on dc24 animal stuck after knocking against an obstical. how do I fix this ?


... Dyson Ball DC24 Bagless Upright Vacuum

There's little or no suction on my central vac so I think maybe something is stuck in the piping. how can I troubleshoot and/or fix this?


First, check the hose, wands, and power nozzle. You can check the hose by dropping a coin in one end, then lifting the length of the hose until the coin drops at. If it doesn't, then there's an obstruction in the hose that needs cleared. Dependin ... Broan-NuTone CV450 Central Bagged Central System Vacuum

I have the brother Ls-2000 sewing machine i threaded the top as well as the bobbin but when i try to sew the thread gets stuck and it bunches up and tangles in the bobbin. also the little bit that did sew was tight stitches on one side of the fabric but very loose on the other side I followed the instruction and it keeps happening i need help i dont know how to fix it please help me


Adjust your tension.You probably did not wind your bobbin properly as well.Make sure you oil your machine every month or so and make sure your bobbin is seated properly before you sew.\012\012Go slower with the pressure foot speed and use the r ... Vacuums

I have a Black & Decker F1060 iron. The extra steam button is stuck down. How do I fix it?


I can help you clean your floor with it!!!. this is the vacuum forum!!. ... Vacuums

The telescopic wand on my electolux oxygen is stuck. Any ideas how to fix or trouble shoot this?


Believe it or not, dish soap and water can usually free that up. the other cure is silicone spray and heat. ... Electrolux EL7055A Bagless Canister Vacuum

Janome 1008 machine stuck in reverse, how do i fix it?


... Vacuums

The drive/neutral lever on my Kirby 2000 G fell off. How do I fix it? I disassembled it removing the the top covering the motor and the bottom where the lever goes in, now I'm kinda stuck...


... Kirby G6 Bagged Upright Vacuum

I have an upright Bissell Powersteamer Carpet Cleaner and the trigger that sprays the solution is stuck and will not work...any recommendations would be greatly appreciated


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

We are on our 3rd Dyson. Both times we have replaced them it's because the rotating brush quits working after retreiving a string (or tie from an article of clothing) from the brush. Is there a fix for this? I'm stuck with the same problem at the moment and really don't want to have to return this 3rd vac!


It could be the clutch, cheap and easy to replace.But it could also be the brush control knob is turned off.If you visit\015\012http://www.sparesaver.com/help-and-support/dyson-section/dyson-technical-advice-450/\015\012they h ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have a Dyson DC25 Animal Vacuum. The handle is stuck in the down position. How can I fix this?


... Dyson DC07 Bagless Upright Cyclonic Vacuum

My daughter accidentally got a scarf partially stuck in our Eureka Boss, now the roller won't work. Is there anything I can do to fix it?


Hi,There are a couple of tabs on both sides of the top housing that need to\015\012 be unlocked by using a flat screw driver, then the top will come off. \015\012The u shaped collar on the tube will then give way to take the roller \015\ ... Eureka Smartvac 4870 Bagged Upright Vacuum

My wind tunnelhas no suction when using the beater brush. Something is stuck. Can I fix it?


If the hose has suction in the upright position, and the floor has no suction in the normal use position, check for obstruction in the dirt path from the agitator cavity, thru the short hose, into the lower handle. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Singer 6235 is stuck in reverse. How do I fix it?


... Vacuums

I have a Dyson Animal that the on/off switch is stuck in the on position. I can only turn it off by unplugging it. How can I fix it?


A squirt of WD40 and a bit of joggling might help if it is just binding. I have had a look at mine and it is getting a bit sticky! However if the fault is mechical then that probably means changing it. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My vacuum is making a loud noise like I sucked up somehting I shouldn't have I have cleaned all the hair and made sure there was nothing else stuck in there but it continues to make that loud noise is there something else that will cause it to make this ugly noise, and how can I fix it


... Dyson DCO7 Upright Vacuum

I have a Dyson 17, the Absolute Brand special for pet hair. I think I have a blockage in the hose. Symptoms are: spewing out fuzz balls and small particles. I have checked all the blockage sites recommended by Dyson and all are clear except a small flexible transparent hose, 6 or 7 inches long, curled up underneath the cleaner head/brush bar unit. Any ideas? I've tried to pull out the stuff stuck in there, but I'm afraid to perforate the hose and I don't know any way to disconnect it.


Try dropping something like marbles into the hose and shake it up and down, may loosen it up enough to draw through.hope this helps you out. ... Vacuums

H2O Vacuum Turbo, the cord was stuck. How to fix it? Thanks


The re-coiling mechanism could be stuck with dirt or out of alignment. You could turn it upside down and get a long screw-driver to remove the lower cover. You will have to trust your best knowledge/instinct to figure out what needs to straighten out ... Bosch BSG71360UC Bagged Canister Vacuum

I have a Henry 200 and the red on/off switch is stuck in the on position can it be fixed


Well... It probably can't be fixed, but it can easily be replaced. Depending where you are, spares are usually readily available.\015\012If you need more guidance, please post here again, and I'll see what I can do to help.\015\012Good luck! ... Numatic HHR-200 Henry Hound Bagged Canister Vacuum

I switch is stuck and I can't turn it on?  Can this me fixed?


... Black & Decker V9660 DustBuster Handheld Vacuum

I took the hose off to wash it then after letting it dry overnight I put it back on but Im guessing it there was still a little bit of water in between the grooves which ran to bottom of vacuum and now my dyson gets stuck, sort of like a tight hinge. It vacuums fine but I have to keep pushing it down to the carpet with my foot. How can I fix this problem?


Lubrication at the pivot points ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I have a THR 138 remote thermometer sensor. It is stuck on HH.H degrees and will not reset. What can I do to fix this? Thanks, Mark Heisler


... Oregon Scientific Vacuums

The ball on my new dyson keeps getting stuck, what do I do to fix it?


... Dyson DC25 All Floors Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0270 seconds