Having problems with your Dyson DC17 Animal Bagless Upright Cyclonic Vacuum ?

My dyson dc17 turn on but doesn't turn


Answers :

Hi there,
I am sorry to hear you are having difficulty with your DC17. If the brush bar is not spinning it may be obstructed.
Please visit http://www.dyson.com/support/help.asp?article=956&product=DC17-ANIMAL for step by step instructions on how to inspect your brush bar and clear any obstructions that may be present.
Once you have carried out these steps you may need to reset your brush bar. To do this please plug your machine in, recline it as if you are preparing to vacuum a carpeted surface, turn your machine on and if the brush bar is not spinning push the silver button next to your power button one time. This should reset the brush and it should begin spinning immediately.
If you are still having difficulty with your machine please contact the Dyson US Helpline at 1-866-693-9766 or the Dyson UK Helpline at 0800 298 0298 so we can provide further assistance.
Best wishes,
Jessica
Repair Help & Product Troubleshooting for Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dyson dc17 turns off when its upright, so when I go to use the attachments it doesnt turn on unless I go to vaccume the floor. whats going on?


Hi there,I'm sorry to hear you're having difficulties with your DC17. Your issue sounds unusual, and we'd appreciate the opportunity to help resolve it. Please call our Helpline free on 1-866-693-9766 - or if you'd prefer, you can email your ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The brush bar on my Dyson DC17 stopped turning.


If this model has a brush control - i.e a roller at the side of the model which controls brush to spin or not, then its a protected brush model - therefore even if the drive belt is intact the Dyson would have to be repaired by a service personnel or ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I got a plastic bag caught in the DC17 Dyson Vacuum. It will not turn now. I do not think it is the belt, as it is there and not broken. The belt and/or the roller is not turning


You need to remove the plastic bag.thats stopping everything ... Vacuums

Dyson dc25 beater bar wont turn - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson blueprint beater bar won't turn - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


The Dyson DC 17 has a rug / floor switch on the head of the vacuum. Please check to make sure the switch is in the Rug position. If the brush roller still does not turn then you have broken the belt and need the following part.\015\012 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC17 beater bar motor works intermittedly. I have to almost whack it on the floor to turn it on and then shuts off again. I have checked the belt and it is fine, also have checked for blockages. The switch to turn the beater bar on or off will not work when the beater bar motor is off. the suction is fine though.


Buy a Kenmore for less money ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC17 won't turn on. It's plugged in and when I turn it on, nothing happens. Not sure what to do.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dyson dc17 turn on but doesn't turn


Hi there,I am sorry to hear you are having difficulty with your DC17. If the brush bar is not spinning it may be obstructed.Please visit http://www.dyson.com/support/help.asp?article=956&product=DC17-ANIMAL for step by step instructions o ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Roller bar will not turn on dyson dc17 - Dyson Vacuums


... Dyson Vacuums

DC17 Animal Bagless Upright Cyclonic Vacuum: dyson animal wont turn off...


Dyson has switch problems, needs new switch. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Roller motor on a DC17 dyson wont turn on


There is a reset button under the cover that houses the on/off switches. remove the handle/wand and look on the back (where the top of the hose sits) for 2 screws (its a torx/star head screw size t10 i believe). remove them and locate 4 small locki ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The brush on my Dyson DC17 Animal does not turn


Remove the plate over the brushbar. Gently clean out debris. Put plate back on,plug in and turn on vac and press brush bar button to reset. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson DC17 Animal Brushes turn but won't ****


My wife had precisely the same problem. I did what dskurth said above and instantly fixed it. Awesome! Found a 6" long eyeliner thingy wedged in there. Just WAIT till the daughter comes home!! 8-)Thanks dskurth! ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson vacuum DC17 beater bar won't turn


Sounds like the brushroll motor has gone bad. disassemble the head and check the continuity on the brushroll motor ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson vacuum dc17 does not turn on


Hi Manny,We are sorry to hear you are having difficulty with your DC17. We have also responded to your inquiry regarding the DC17 wiring diagram. Based on your description of the problem, we would appreciate the opportunity to trouble shoot w ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Turns off - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Replaced power swith part no:910971-01 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a Dyson DC17 that has started making a loud noise when on carpet when the brush is engaged but not on hard wood when the brush is not turning. I have remove all the material (hair,lint, etc.) wrapped around the brush itself, but it is still making the noise


You need to replace the belt. Here is the belt you need and a manual you can view which has instructions:\015\012\015\012Dyson DC17 Belt and Manual ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson dc17 won't turn on and stay on unless you hold the red button on?


My vacuum had this exact same problem, but was out of warranty because \015\012it was remanufactured. Thankfully, it's a very quick, five-minute fix.\015\012\015\012UNPLUG The Vacuum!\015\012Remo ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

It won't turn on - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Please check the power from the main plug to the unit. If this is present then the mains switch must power, if not the switch can be faulty or else a possible motor failure. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

DYSON DC05 It just doesnt want to turn on. I switched it off, one minute later I tried to switch it back on and it didnt work. I have washed the filters, checked the tubes and everything seems ok.......any ideas? thank you, Lucie


My friends Dyson DC05 was loosing suction and then it stopped altogether one day. When she took the filters out there was black soot in them so it was obvious that the motor had burnt out. I think this happened because she wasn't cleaning the filters ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

My dyson doesnt turn off - Vacuums


Sounds like it could be a bad switch. ... Vacuums

I have a dyson dc17,when i turn on the roller brushes it is very loud


... Vacuums

Motor loud I have a dyson dc17..recently when i turned it on and pulled the handle down to vacuum the motor was very loud..put the handle in the upright position it is quiet.any suggestions?


When you put the handle down it turns on the brush roll. you may need to clean the brush roll or replce it if the bearings are bad.also clutch and 2 belts are started when putting handle down for brush operation. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC17 seems to be overheating? Started to smell like something was burning after running it for 15 min or so. I turned it off for an hour or so and then started it again and now is making a loud rumbling noise


You need to replace the worn belt. Here is the belt you need and a manual you can view which has instructions:\015\012\015\012Dyson DC17 Belt and Manual ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Dyson dc17 turns on, but when you want to vacuum, the roller doesn't move


You need to replace the belt. Here is the belt you need and a manual you can view which has instructions:\015\012\015\012Dyson DC17 Belt and Manual ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0471 seconds