Having problems with your Dyson DC18 all floors Bagless Upright Cyclonic Vacuum ?

Dyson DC18 brush beater bar intermittent failure problem.

\015 The brush won't turn, but it's not a failed belt. I've also pressed the 'reset' button on the 'bar head' (down by the floor) and pressed the 'brush' on/off switch multiple times.\302\240\015\012\015\012It seems there is an electrical connection failing.\302\240\015\012\015\012Also, when it was first a problem, it came back on while pushing the unit across the carpet (as normal operation) after moving it a few feet - like a rolling jump start. Almost like an electric motor with a bad/old motor.\015\012\015\012Then after stopping (putting it 'upright and locked') and using it some more, it wouldn't come on at all.\302\240\015\012\015\012The unit is not even a year old - any ideas? Particularly electrical, or not 'belt-related'?\015

Answers :

Take it in to be serviced. It could be a dead motor to bad connection. 5yr warranty will leave you paying nothing. Best Buy or local authorized service center can do it.
I'm having this same problem. It doesn't sound like the motor is spinning until it kicks on from the push start. I think this is the motor or a connection (more likely the motor because the push starting works).\015\012
\015\012We've been looking at the replacement power heads. They're expensive ($130). I could replace the motor myself. We'll have to try the warranty approach - we bought it through a discounter though... I don't think we have warranty service with it.
Repair Help & Product Troubleshooting for Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson DC18 brush beater bar intermittent failure problem.

Take it in to be serviced. It could be a dead motor to bad connection. 5yr warranty will leave you paying nothing. Best Buy or local authorized service center can do it. ... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

My dyson C07 ANIMAL is making a loud clatter noise when I push the head down. I have removed the sole plate and the brush bar is cracked so I removed it, but I understand the clutch maybe a problem also from reading other people's comments..how can I tell if it's a clutch problem also? Or... could it be just the brush bar being cracked that's causing the loud noise?

... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have a dyson DC28 vacuum and the power button flashes on and off and the beater bar quit turning. I turned it over and found some string caught on the beater bar which I removed, but the beater bar still does'nt turn and the power button still flashes on and off. I hope you can give me a solution to this problem.

I had the same symptom with my wife's DC28. The problem was associated with the cam driven height adjustment mechanism. The beater bar must rock freely up and down when pressing on the tabs that the end cam lobes actuate. On ours I found hair and cru ... Dyson DC28 Animal Bagless Upright Vacuum

Dyson dc28 red and white lights keep flashing, brush bar does not rotate. Cleaned off bar and still the same problem

... Dyson DC28 Animal Bagless Upright Vacuum

My Dyson DC 24's beater bar switch didn't actuate and the beater bar didn't turn. When I brought it to a certified serviceman he told me that a wire interferred with the switch and all he had to do was move the wire out of the way of the switch. At the time the machine was under warrantee and it didn't cost me anything. Now however, the machine is out of warrantee and the problem has returned. Does anyone know how to access the switch and move the wire out of the way?

Hi- I had the same experience but it turns out there's a small trip switch if you've taken the brush out to clean it, it needs to be reactivated by pressing the small red button to the right of the brush... took me a year to figure this out! Been mea ... Dyson Ball DC24 Bagless Upright Vacuum

I have the Eureka 4870 "The Boss" Smart Vac. The beater bar began to turn constantly and can't be shut by moving the Brush Roll Contol to Bare Floor position or the machine to the upright postion. It has also eaten two new belts. A local tech says he has seen this problem whereby the free-wheel assembly that makes contact with the belt to engage the beater bar is misalgned and cannot disengage. It is usually the chassis which would mean replacement of enough parts that would not be worthwhile

... Eureka Smartvac 4870 Bagged Upright Vacuum

Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the Carpet/Bare knob is moved to the Bare Floor position and then back to the Carpet position. Then the beater bar turns until the handle is placed into the upright position. What might be the problem?

Hi its Darran at Dyson.The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My Dyson DC25 (which I've had for about a year and a half), doesn't seem to be picking up like it used to. There doesn't seem to be a problem with the brush bar, but I can't figure out what the problem is or how to fix it

Hi there,\015\012\015\012Sorry to hear you're having a problem with your DC25. You should be able to resolve this issue by following these simple steps: ... Dyson DC25 All Floors Bagless Upright Vacuum

My dc-15 bush bar will not work - Dyson 909592-05 DC-15 Roller Brush Beater Bar

Head motor blown, will have to take it to your nearest good hoover repair centre should cost around 49 dyson will charge 73 ... Dyson 909592-05 DC-15 Roller Brush Beater Bar

I was going to send my animal in for repairs but after waiting a week Dyson sent the wrong box. The beater bar only works intermittently and the thing roars.

Hi there,I am very sorry to hear you are having difficulty with your machine. I apologize for the error regarding your box. However, we would appreciate the opportunity to assist you further in this matter. Based on the details you provided, ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a Dyson slim DC18 model. The beater bar turns, but there is hardly any suction, I have cleaned the filter, checked for blockages in the hose, emptied the cylinder...what could be the issue? The unit is only 2 years old. Thanks

... Sharper Image Dyson Slim DC18 All Floors Vacuum

My yellow DC 14 bagless Dyson is having a problem. The brush bar won't spin. Help!

First off I would say be sure to check that you haven't pressed the button that turns the brush on and off, as silly as it may seem it may actually be the case. But if it isn't follow the steps below to clean your brush and get it working right again ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

The beater bar on my dyson dc 28 animal sweeper is not engaging at all what could the problem be with this

... Dyson DC28 Animal Bagless Upright Vacuum

Dyson dc15 brush bar turns intermittently depending on angle of vacuum

... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Got new filter, cleaned beater bar, now Dyson DC14 vacuum making loud whistling noise - what is the problem?

... Vacuums

Beater bar dyson vacuum Works intermittently - Vacuums

... Vacuums

Hi, I have a Dyson DC04, (silver/lime) making ear popping screams! Does not happen all the time, and more noticeable when it is pulled back.The suctions not a problem and no funny smells or strange noises from the motor. Ive taken the base plate off and the belt and brush bar seem fine, but when I turn the belt, it seems to be the motor spindle thats squeaking, almost as if it need oiling, any help please

... Vacuums

Dyson Animal motor is running, beater bar is turning but very little if any suction. No suction from hose either. The inside canister is filling and moving, so there is some dirt being sucked in there. I have thoroughly cleaned all filters but not sure what is causing the problem. Any ideas?

Obstruction in the hose?\015\012Your vac has developed a hairball possibly.... when a piece of flexible media ie.... cardboard, plastic etc... gets lodged in the hose, and begins collecting hair & dust to the point it no longer has enough d ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The beater bar switch on my dyson 24 gets stuck in the off position. I have to push it many many times before the beater bar engages. How can I fix this?

... Dyson DC24 All Floors Vacuum New Upright NEW

We have a dyson dc14 and the beater bar stopped turning, we cleaned the bar off and checked the belt and it's not broken, I know I called Dyson a year or two ago and they told me how to reset the beater bar motor but I don't remember exactly what I did, anyone know the answer to this??? thanks in advance....

Hi its Darran at Dyson.Check that the brush control dial is in the centre position when the machine is locked upright. When you release the head and pull the handle back this dial should mopve forward to the on position. Once here, the ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I caught a hidden shoe lace in my dyson 17 beater head....shut it of quickly....removed the lacing from around the head....loosened the three screws on the botton of the head....cleaned it out from whatever little dust there was....checked the heads belt reset the roller brush into the head...but alas no beater brush action. what to do?(I've had my dyson about5 months....HELP!. thanks, Jan Selman

... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a Germ Guardian GGU350TT. The Beater Bar Brush is seized up on the ends and no longer rotates. Can it be fixed or can I buy a replacement Beater Bar Brush? I've called the company and they were no help.

... Germ Guardian GGU300 Bagless Vacuum

Dyson DC27 beater bar making noise

Hi there,I'm sorry to hear you're having difficulty with your DC27's brush bar. If you haven't already been in touch with us, I'd encourage you to give our Helpline a call on 1-866-693-9766 (US), or 0800 298 0298 (UK), as we may be able to re ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dyson animal is hard to push on carpet - the beater bar is still operational. When I turn off the beater bar and run the vacuum on hardwood the beater bar stops moving, but it still ''rolls'' on the hardwood - it doesn't pull up like it used to. It also seems to not be picking up as well as it used to, although no blockages are present and the filter is clean.

... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a Bissell 3920 and the beater bar only turns when I'm pulling the vacuum.How do you get the end caps off of the beater bar to clean it out? This has happened before when it was under warranty and I was told to remove caps and clean frequently.I am afraid prying them off will break the vacuum.It also has very low suction and I have cleaned the filters and the belt is fine.Will cleaning the inside of the beater bar fix my problem?

... Bissell 3920 Cyclonic Pet Hair Eraser Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0984 seconds