Having problems with your Dyson DC18 all floors Bagless Upright Cyclonic Vacuum ?

Dyson DC18 will not turn on

\015 When I recently plugged it in there was a little puff of smoke that came from the outlet - Now nothing happens when I press the on/off switch - Is there a fuse or reset switch somewhere to check?\015

Answers :

Repair Help & Product Troubleshooting for Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson slim dc18 turned off - Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow


Hi there,If your DC18 shut off during use, it may have overheated due to a blockage, or because the filter needs a wash. Once the machine cools down, you should find it runs again - but to prevent this from reoccurring, please follow the step ... Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow

Brush not turning on dyson slim - Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow


... Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow

Brushes will not turn on dyson dc 18 - Dyson DC18 all floors Bagless Upright Cyclonic Vacuum


... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

I have a Dyson slim DC18 model. The beater bar turns, but there is hardly any suction, I have cleaned the filter, checked for blockages in the hose, emptied the cylinder...what could be the issue? The unit is only 2 years old. Thanks


... Sharper Image Dyson Slim DC18 All Floors Vacuum

My dyson dc18 has suction but rug brushes wont turn


... Sharper Image Dyson Slim DC18 All Floors Vacuum

Dyson DC18 Slim won't stand up - Dyson DC18 all floors Bagless Upright Cyclonic Vacuum


... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

Height adjustment dyson dc18 - Dyson DC18 all floors Bagless Upright Cyclonic Vacuum


... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

Dyson dc18 replace switch - Dyson DC18 all floors Bagless Upright Cyclonic Vacuum


... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

How to fit a pedal plunger on a dyson dc18 - Sharper Image Dyson Slim DC18 All Floors Vacuum


Http://www.youtube.com/watch?v=r0ZaqymChXo ... Sharper Image Dyson Slim DC18 All Floors Vacuum

I turn my dyson on and it runs for 5 min then turns off


The symptoms you describe are typical of overheating. That indicates that there's a blockage somewhere. Follow the instructions in your user manual for removing blockages (or you can download a copy from Dyson website if you need to), and make sure t ... Vacuums

My Dyson DC07 will not turn on. I was just using it and moved to a new area and plugged it in and it turned on for a split second and then it turned off and now it won't turn on at all. Any suggestions?


Loose wire, bad switch, or thermal cut-out. In any event, you will have to use a voltmeter to troubleshoot the problem, there is no way of knowing the problem otherwise ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson dc25 just turned off while i was using it first the roller brush stoped turning so i used the hose and now it turned off and wont turn on how do i fix it?


... Dyson DC25 All Floors Bagless Upright Vacuum

I have a dyson canniter stow away vacuum. i've had it for 2 years and it just started having a problem. when i turn it on the motor starts just fine but the vacuum head does not turn on. Yet when i push it forward it trys to start and turns on for a second and turn off - almost like the connector isn't connecting the hose to the head very well anymore.


Hi, After reading you're problem, the symptom's are just like you said. Its just a matter of checking the connections. The connection where it plugs into the head it self. When you push forward the forward motion and down pressure makes ... Dyson "Stowaway" Canister Vacuum Vacuum

My dyson turns on but when i push it to vacuum it makes this awful sound like something got sucked up and caught. i turn it off and turn it over and nothing is stuck. My husband even looked at it and he thinks it's the belt. The belt doesn't turn as loose. Please help.


If yours is one of the DC07 models that has a clutch (there's a knob you can turn, close to the front on the right side - right as you look from behind, that is). Sometimes this problem is cured by simply turning that knob from one extreme to the oth ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC18 brush beater bar intermittent failure problem.


Take it in to be serviced. It could be a dead motor to bad connection. 5yr warranty will leave you paying nothing. Best Buy or local authorized service center can do it. ... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

The beater bar on my Dyson won't turn. The vacuum runs and suctions but the bar won't turn and the belt is not broke. The beater bar did get a carpet fiber caught and wrapped around it which stopped the bar and I removed the bar to cut the fiber loose and replaced it and now it won't turn


The belt doesn't have to be broken to make the vacuum not work correctly. If the belt is stretched the vacuum won't operate the way it is supposed to. You can get replacement Dyson Belts here: ... Vacuums

I have a dyson DC28 vacuum and the power button flashes on and off and the beater bar quit turning. I turned it over and found some string caught on the beater bar which I removed, but the beater bar still does'nt turn and the power button still flashes on and off. I hope you can give me a solution to this problem.


I had the same symptom with my wife's DC28. The problem was associated with the cam driven height adjustment mechanism. The beater bar must rock freely up and down when pressing on the tabs that the end cam lobes actuate. On ours I found hair and cru ... Dyson DC28 Animal Bagless Upright Vacuum

My dyson dc07 won't ****, and turns off immediately when i turn it on. It also smells funny like burning plastic when it is turned on. There are no blockages, and the filter it completely clean


Sounds like the motor is shot. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC21 brush will not turn on all the time. When the brush turns on, it won't turn off.


... Dyson Vacuums

My Dyson Blueprint bagless rollerball vacuum brush refuses to turn every so often. Everything is connected properly, nothing is clogged in the brush, the vacuum power is turned on and then the brush bar control is released, but the brush still does not turn.


... Dyson Vacuums

Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the Carpet/Bare knob is moved to the Bare Floor position and then back to the Carpet position. Then the beater bar turns until the handle is placed into the upright position. What might be the problem?


Hi its Darran at Dyson.The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The bar isn't turning on my Dyson Ball vacuum. It is brand new, never has been used, turn it on and the bar doesn't turn around.


Greetings from GoVacuum,\015\012\015\012The Dyson DC15 Ball is a two motor upright vacuum. Most other uprights use just a single motor that controls the suction on one end, and the roller brush on the other end. \015\012\01 ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

My Dyson Animal turns the "flipper"(?) on that I would use on my carpet, but it turns stops turning right away. It then goes on and off every 5 seconds or so.


You need to replace the belt that turns the brush. Here is the belt you need and a manual with instructions on how to change it:Dyson DC07 Belt and Manu ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The brush bar on my Dyson DC17 stopped turning.


If this model has a brush control - i.e a roller at the side of the model which controls brush to spin or not, then its a protected brush model - therefore even if the drive belt is intact the Dyson would have to be repaired by a service personnel or ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0590 seconds