Having problems with your Dyson DC24 Ball All-Floors Upright Vacuum Cleaner ?

The brush bar isn't going round ?

\015 The brush bar isn't turning and it isn't picking up the small bits\015

Answers :

The brush roller drive belt could be stretched but not broken. Also, the brush roller could be clogged and unable to rotate feeely
Your problem seems to be the belt has snapped. Underneath the the hover there is a rubber belt that connects around the brush bar and around the motor, this belt will be broken. They can purchased from any hoover shop for a couple of pounds.
Repair Help & Product Troubleshooting for Dyson DC24 Ball All-Floors Upright Vacuum Cleaner

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The brush bar isn't going round ?


The brush roller drive belt could be stretched but not broken. Also, the brush roller could be clogged and unable to rotate feeely ... Dyson DC24 Ball All-Floors Upright Vacuum Cleaner

Brush bar wont go round - Hoover U9145-900 Z Bagless Upright Vacuum


Here is the manual > http://hoover.com/file/532/ ... Hoover U9145-900 Z Bagless Upright Vacuum

Hi my dyson is not sucking up very well when i put it on its side and switch it on the brushes are not going round when i put the white dail to on at the bottom the brushes go round but it makes a terrible noise i have cleaned the brushes checked the soleplate is on correct and taken the clear hose off and checked for splits the suction is there when i have been checking these things hope you can help thx


Hi there,Sorry to hear you're experiencing a problem with your cleaner. Please get in touch with us, free, on 08002980298 (UK), or 1866MYDYSON (US). We can run through some checks over the phone and provide you with the assistance you nee ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My Bissell Model 3760-4 is not working properly. The belt has been replaced (and checked 3 times), but the brush bar does not move when the brush motor button is on. The little metal turning piece that turns the belt is turnable with one's finger when the belt is off, but when we put it all back together and turn on the vacuum, the brush bar does not go around and the burning belt smell returns. The portable part of the machine works properly. It's the brush bar. It has been cleared of hair, etc


... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Brushes not going round


... Dyson DC03 Bagless Upright Cyclonic Vacuum

BRUSHES WON'T GO ROUND


Try to turn the brushes by hand, while the machine is off and on it's back. If the brushes will not turn, the brush motor is burned out. If you are mechanically inclined you should not have too much trouble replacing it.Remove the bumpe ... Roomba Pro Elite Bagless Robotic Vacuum

My dyson dc07 the brushes are not going round


That means that the belt is worn, stretched or broken and needs to be replaced. Here are the belts you need:Dyson DC07 Belts ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Brush will not go round on the dyson dc 33


... Dyson DC33 Bagged Upright Vacuum

Brushes not going round


The problem you're experiencing is most likely with the clutch assembly. It's a fairly inexpensive part, but they can be tough to repair. You can get the part at evacuumstore.com ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dc 25 brush bar not going down


... Dyson DC25 All Floors Bagless Upright Vacuum

I have a brand new DC24, and the flippin' brushes won't go round! I'm assured that they do, but Ive pushed the button with the brush picture on, nothing's happening. Very frustrating when I need to vacuum.


Hi there,\015\012\015\012Sorry to hear you're having a problem with your DC24. You should be able to resolve the issue by following these simple steps: ... Dyson Ball DC24 Bagless Upright Vacuum

Hoover windtunnel t series belt is loose- roller brush doesnt turn. Its brand new belt is slipping. we bough new belts and putthem on same problem. Can not find solutio in manual. Is the belt supposed to go around the "metal pulley". I know it goes around the little metal motor thing, then thru the guide and around the brush. What is the metal pulley??? Is is the larger round silver thing between the guide and roller?


I also have a loose belt and have bought additional belts but have the same problem. I put the it around the metal rotor and around the brush roller a shown by he Hoover video, and it is loose. ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

The brush does not work on my dc15 animal, there is great suction but after about 20 seconds it sounds like something has got blocked in it although nothing is clogged, filters and hoses have all been cleaned but the brush still wont go round


Hi there,Sorry to hear you're having a problem with your DC15. You might find it helpful to visit the Support section of our website and follow these simple steps: ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Replaces the belt on dirt devil dynamite pluse model put everything back together started it and it burt the new belt up that fast. I put it around the beater brush and the metal bar I thought it should go around, yet it seemed like there should be something else there to put the belt on. What do you suggest? Do you have picture I could go by?


The metal bar you put it around if the bar itself does not spin it is going to burn the belt up. Every thing that the belt is supposed to go around has to turn or the belt will rub on the piece not moving and brake. ... Vacuums

Switch for roller brush not working and brush not going round, any help plz?


\015\012mikerobin143 's solution \015\012Apparent common failure is that either the thin yellow and or blue motor drive wires that run from the LH side of the vacuum where the "control b ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Hi, i have a panasonic eco max, the brush has stopped going round, the belt is as new and brushes clean.suction good from hose. Any ideas please? thank you


The brush on this model is controlled by the on/carpet/floor switch and will only work in the carpet position. If the suction motor is running then it could be the roller brush motor, but it's more likely to be the microswitch which stops the ... Panasonic Mc-Ul594 Eco Max - Bagless Upright Cleaner

My bar for the carpet will not turn or go round and round


Hi!Sorry to say there is no amount of advice that will repair this problem.Maybe the rubber drive belt is either broken or worn, so it can no longer drive the beater.If the carpet beater is jammed you will hear a nasty s ... Vacuums

The brush bar quit going around


Did the belt break? ... Vacuums

Brushes do not go round on my Dyson DC15


Hi there,I'm sorry to hear you're having difficulty with your DC15. Your machine has a sensor which shuts off the brushbar something obstructs it. Once you've checked the cleaner head for blockages and cleared any threads or hair from around ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Brushes wont go round


Hi there,Your DC24 is equipped with a sensor which shuts off the brushbar if something jams it. Once you've checked the cleaner head for obstructions, and removed any threads or hair from around the brushbar, you should be able tor reset the ... Dyson Ball DC24 Bagless Upright Vacuum

My beater bar on my Dyson just quit going round.


Change the belt because it sounds like the belt has snapped if its not turning around. Easy to do if you flip the machine over with the beater bar looking upwards. Locate the three/two screw heads and undo with a coin. When the roller section is reve ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush wont go round but the belt is ok - Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum


The belt may look okay but it can still be stretched. If it is stretched it won't turn the brush against the resistance of the carpet. Here is a link to the belts you need and to the manual which has instructions: ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

My beater bar is not going round, machine is not picking up I have checked for blockages and everything seems OK


The belt that drives the roller may have broken and reqiures replacement. You need to take the cover off underneath and remove the roller. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Brush bar goes round but doesn,t **** up - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

I have a Eureka 4800 series the Boss upright with a bag and Hepa filter. I love it! I was just vacuuming with the hose part and all was well and then suddenly the lower brush came on and a "burning" smell followed. Thought it was the belt so my husband was going to put on the new belt which I had on hand! When he turned it over, the "bar" that holds the belt looks as though it "shot through" the plastic side of the housing on the vacuum. There is melted plastic on the outside of the vacuum and o


I had the same problem. Take out the old belt if possible. Remove the 4 screws inside the filter and the 3 on the front of that housing. pull out the foam around the motor. carefully pull out the suction tube that is press fit against the motor. ... Eureka 4874 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0513 seconds