Having problems with your Dyson DC25 All Floors Bagless Upright Vacuum ?

The red foot pedal won't stay up in a locked position

\015 My vacuum will stand up, but the red foot pedal does not stay in a locked position to keep the vacuum in the upright position. When I tilt the vacuum back to roll it, it will fall into the vacuuming position. It should not do this until I step on the red pedal to release it. It will also fall into the vacuuming position easily if it is bumped.\015

Answers :

Repair Help & Product Troubleshooting for Dyson DC25 All Floors Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The red foot pedal won't stay up in a locked position

... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson will not stay up in a locked postion, red foot pedal looks like it is too far in the gray pedal

... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I took my Dyson DC 25 Animal apart to clean it, and now the red foot pedal won't lock the vacuum into the upright position anymore. The trouble is the spring pin for the pedal popped out and I can't figure out where it is supposed to go.

That spring thing goes where the pedal screws into the side. When 'facing' the dyson in the front, it's on the left side. The spring's circle part and short stem section goes into a divot area on the pedal. The other end is tensioned (braced) a ... Dyson DC25 All Floors Bagless Upright Vacuum

My DC-25 will not return to the upright position. I emailed Dyson support and the response was: "The DC25 stabilizer wheels will not lock into position if the “spokes” on the red pedal are not seated correctly." I agree with that assessment, but cannot figure out how to get the spokes on the red pedal to seat correctly. The manual is useless for this problem since that part of the vacuum cleaner came already assembled, so the manual does not address it. Help.

It sounds like the undercarriage unit has failed. It is a common problem on ball models. The DC25 is a recent model so would still be under Dyson's 5 year guarantee. Get them out to it. ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Hoover windtunnel tilt mechanism won't remain locked in upright position or at any of the fixed angle positions - now any slight bump and the lock releases. Normally you must manually use the small foot pedal release on the left side as you face the vacuum from behind.

Hello, stanI was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I ... Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum

The kick stand that lowers the vacuum when in use got in a position where the red foot pedal would not come back up to bring the wheels down and the vacuum rest in the upright position. We took it apart and corrected the position, but the side with the small circular spring came out and we are not sure how to attach it back, exactly where it hooks onto. Can you help show us where it goes?

... Dyson DC25 Animal Bagless Upright Vacuum

My 9 year old Sebo X4 will not stay in the upright position. The foot pedal no longer springs back to hold the machine in the upright position. Has a spring broken? Which part needs replacing?

... Sebo X4 Bagged Upright Vacuum

I'm trying to get my S7000 Miele to stand upright an lock in this position. It wont , i tried to see if foot release was jammed but cant tell it doesnt seem to release to let it move upright an lock in again..help

There is a rear dust cover that sometimes gets stuck, this will make it almost impossible to lock the handle up. First locate the cover which is at the rear right above the wheels. It's about 2"x8" and ribbed vertically and slides up behind the rear ... Miele S7210 Bagged Upright Vacuum

Dyson DC-18 Slim won't stand up - Red Pedal Stays Down

Here is a video how to repair the pedal ... Sharper Image Dyson Slim DC18 All Floors Vacuum

Hi, pressing the big red foot button on the dc25 lowers the cleaner to the working position,but it wont stand up again. would appreciate some help. thanks. TC

Sounds like the ball cradle is worn out, the springs are too stretched to pull the handle release pedal back into place. you can do one of two things, replace the cradle assy, or just lift the red pedal up when you raise the handle ... Dyson DC25 All Floors Bagless Upright Vacuum

My Dyson animal won't stand up??? The stabilizer stand won't lock down? It looks like the pin in the red foot pedal is not in the right groove???

All set! I called Dyson! ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

The foot pedal on my Kenmore 116-31912100 stays in down position like a spring is broken.

The plastic tab on the foot pedal that acted as a return spring has broken off of the foot pedal. It's Macgyver time! For the not-so-mechanically inclined, this involves tape and rubberbands. For the somewhat mechanically inclined, a drill and small ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

My miele s2 momemtum electric wand is broken, won't stay locked in position. It is telescopic.

... Miele Vacuums

The canister wont lock in position like theres a part missing to push it up to lock in

... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My Sentria always runs in the drive mode and it is so fast it seems out of control. If I push the neutral pedal it stays in drive. I can push it the regular way when it is turned off, whether the pedal is in the drive position or neutral.

I sold vacuums for almost 20 yrs and the Kirby gets lots of complaints. The transmission that it has in it breaks as your has and they are costly.The best thing to do would be to take the maching to the local vacuum store(eg. sewing and vacuum are of ... Kirby Ultimate G Bagged Upright Vacuum

I have a Dyson DC25. The wheels won't return to the "storage" or "up-right" position. The red and gray "levers" that you step on to put in the up-right position seem to be locked. Any suggestions? Thank you, Cari

... Dyson Vacuums

Miele s7000 I clicked my upright into sitting position and accidently bumped the foot release knob. The body fell back and now I can not get it to click back into upright sitting position. Something is now in the way of it locking into place. This happened last year and it was under warranty. it no longer is and I would like to be able to fix it myself in the future. Can you help me? Thank you. Kacee in Oregon

... Vacuums

Foot pedal broken

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=49977&thid=629933\015\012Foot pedal broken\015\012Posted by Monte79 on May 28, 2008\015\012I have Bissell Power S ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Our Bissell ProHeat carpet cleaner is not working. The power is connected because the red heat lamp is on, however when you touch the foot pedal for the start of the rollers, the power is not connecting. Short somewhere??? How to locate the short? Please advise. Thank you.

Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Kenmore InteliClean 116.35923502 Two, I believe unrelated, problems. 1) The InteliClean sensor lights stay amber and red even when the machine is in the upright position and the suction line is disconnected from the cleaner head. 2) There is a lot of vibration and noise in the agitator roller housing. I picked a little hair out of the roller brushes but other than that they were clean. Thank you for any suggestion you might offer.

I had the same problem with the amber inteliclean light continually on. I found the problem to be in the plastic housing that connects the suction hose to the back of the upright section. You have to remove three screws and gently pull ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Vacuum won't stay in upright position with foot latch engaged-leans backwards as if latch is loose

... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Have oiled my Bernina 707 minimatic 1970 sewing machine and I have power when I press the foot pedal, but when the handwheel is tensioned none of the mechanism under the free arm cover plate moves. I went to sew something and the needle jammed. I took the covers off and there is no debris - it was all oiled and left overnight. Now the Take up lever doesn't move and is in the down position.

... Vacuums

KIRBY G6 Wheel with the foot pedal to raise and lower has fallen off and wont seem to go back on????

... Kirby G6 Bagged Upright Vacuum

The cantister on my DC04 no longer stays secure when in position. It does not snap and lock into place as before. I found a small plastic tab about 1/4 inch deep and less than an inch wide on the floor. Looks like it has broken off the lockin mechanism any suggestions?

Check your warranty. If it's still good read to find out if this part is covered (probably not) and where to take it for repair or replacement of the tank. \015\012Unfortunately, it may turn out you'll need to buy a new vacuum. ... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

My Hoover U8143-900 does not stay "locked" in the upright position anymore?

Could be one of 3 things:When you push it into the upright position can you manually pull the footswitch up and lock it? If so, the spring isn't set right. If the footswitch isn't moving at all, the plastic may be broke (Not so good), a ... Hoover U8143-900 Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0394 seconds