Having problems with your Dyson DC25 Animal Bagless Upright Vacuum ?

Dyson dc25 roller bar works but no suction - Dyson DC25 Animal Bagless Upright Vacuum


Answers :

Hi there,

I'm sorry to hear you're having difficulties with your DC25. If the machine doesn't seem to be picking up as well as usual, this may be due to a blockage. The filters may also need a wash.

The easiest way to locate and remove any blockages is to follow the steps shown in our online support guide:

http://www.dyson.com/support/help.asp?article=1148&product=DC25-ANIMAL

In normal use, the filters should be washed at least once every 3 months as shown in the video below. Use cold water without detergent, and allow at least 24 hours for them to dry completely before replacing them.

This should resolve the issue, but if you'd like any further assistance or advice, please give our Helpline a call free on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com



Repair Help & Product Troubleshooting for Dyson DC25 Animal Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson dc25 roller bar works but no suction - Dyson DC25 Animal Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulties with your DC25. If the machine doesn't seem to be picking up as well as usual, this may be due to a blockage. The filters may also need a wash.The easiest way to locate and remove ... Dyson DC25 Animal Bagless Upright Vacuum

Dyson animal beater bar not working - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Is the belt ok that drives it , is the clutch ok this video will give you instructions how to fix ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc41 roller won't work - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My dyson does not work with the hose out - Dyson DC25 Animal Bagless Upright Vacuum


... Dyson DC25 Animal Bagless Upright Vacuum

Dyson dc25 beater bar wont turn - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My brush bar is not working - Dyson DC15 Animal Bagless Upright Cyclonic Vacuum


Make sure your clutch is turned on to drive - if ok, take sole plate off to see if the belt is in tact if not, needs new clutch ... Dyson DC15 Animal Bagless Upright Cyclonic Vacuum

Beater bar won't work - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The beater bar doesn't work - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


You need to replace the belts. Here are the belts you need:Dyson DC14 Belts ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson animal will not stand upright - Dyson DC25 Animal Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulty standing your DC25 Animal upright. It sounds as if the stabiliser needs realigning. This is simple to do - please follow the steps shown in the video below.If you'd like any further ... Dyson DC25 Animal Bagless Upright Vacuum

Reset switch on the DC25 dyson vacuum - Dyson DC25 Animal Bagless Upright Vacuum


Hi there,Your DC25 is equipped with a sensor which shuts off the brushbar if something jams it. After you've checked the cleaner head for obstructions, and removed any threads or hair from around the brushbar, you should be able to reset the ... Dyson DC25 Animal Bagless Upright Vacuum

Dyson dc25 power switch will not stay on - Dyson DC25 Animal Bagless Upright Vacuum


I called Dyson because I had a similar problem. When I pushed the red button down on my dc25, but it would not stay down. The vacuum would turn on when the button was pushed down, but of course when I let go of it the vacuum would shut off. The help ... Dyson DC25 Animal Bagless Upright Vacuum

How to fit a new Dyson dc25 valve wheel - Dyson DC25 Animal Bagless Upright Vacuum


... Dyson DC25 Animal Bagless Upright Vacuum

How do you replace a Dyson DC25 Valve Wheel - Dyson DC25 Animal Bagless Upright Vacuum


... Dyson DC25 Animal Bagless Upright Vacuum

Dyson animal 17 hose not working - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson dc27 noisy and brush bar not working - Dyson DC27 Bagless Upright Vacuum


... Dyson DC27 Bagless Upright Vacuum

How to remove beater bar on dyson dc 28 - Dyson DC28 Animal Bagless Upright Vacuum


... Dyson DC28 Animal Bagless Upright Vacuum

Dc25 brush bar head won't lay flat - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Beater bar not working. suction not working - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Check for a broken beater brush belt.\015\012Clean the beater brush, clear of all debris and add some WD40 at each end where the rubber holders are. Turn beater brush by hand to work the WD40 into the axle.\015\012Reassemble making sure the belt is ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Dyson reset button - Dyson DC25 Animal Bagless Upright Vacuum


Hi there,DC25 doesn't have a reset button - if the brushbar isn't rotating, please follow the steps shown in the video below to check the cleaner head and brushbar for obstructions, then reset the machine.Please note, the brushbar wil ... Dyson DC25 Animal Bagless Upright Vacuum

How to take roller brush out of dyson - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson beater bar won't spin - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. \012he first check is to ensure that the brush control dial is set to the correct centre position when the machnie is locked upright. When you release the head the dial should move forward to the on position and th ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

How to put roller back on vacuum - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


More info required which vacuum you have etc ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson has lost suction, no blockage - Dyson DC25 Animal Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulties with your DC25. If the machine doesn't seem to be picking up as usual, you may need to give the filters a wash.In normal use, the filters should be washed at least once every 3 mon ... Dyson DC25 Animal Bagless Upright Vacuum

Dyson blueprint beater bar won't turn - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


The Dyson DC 17 has a rug / floor switch on the head of the vacuum. Please check to make sure the switch is in the Rug position. If the brush roller still does not turn then you have broken the belt and need the following part.\015\012 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Better bar isnt turning on the animal - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


I would say that the belt is broken or the switch was hit and the contacts got misaligned (wife is a little rough on things). If you hit the switch on top with the vac in the use position, do you here the motor turn on? If you are not Mechanically ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1674 seconds