Having problems with your Dyson DC25 Vacuum ?

Dyson dc25 wont lean back properly

\015 It works fine and whilst using,i put it in the upright position then stepped on the back to lean and continue using but it wont lean back correctly,the brushbar just sits too high and dangles to the left,so im unable to get the correct angle for vacuuming.\015

Answers :

Repair Help & Product Troubleshooting for Dyson DC25 Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson dc25 wont lean back properly


... Dyson DC25 Vacuum

I was using my dyson dc25 when it shut off by its self. I was actually using the hose to get along my base boards. Now it wont turn back on. Ive checked for clogs and still 30min later its not on. What should I do know?


... Vacuums

Dc25 dyson ball clicking and wont roll well - Dyson DC25 Vacuum


... Dyson DC25 Vacuum

Dyson dc25 power switch wont stay on - Dyson DC25 All Floors Bagless Upright Vacuum


Hi Chett,I'm sorry to hear you're having difficulty with your DC25. If the switch doesn't seem to be working correctly, I'd encourage you to get in touch with us directly as we'd appreciate the opportunity to provide further assistance. ... Dyson DC25 All Floors Bagless Upright Vacuum

Dc25 wand not going back in - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson wont lay flat on floor - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Today i was hoovering, and then my dyson just cut out! i left it a few hours then went back to it, it gave a little noise when i switched it on, then again i tried but it failed to come on! ive even changed the fuse in the plug! and now my dyson wont turn on at all, ive cleaned everything there is too clean! help! :D


It looks like you need a professional repair. If you're really lucky this may just be a break in the flex, or the switch has failed - both relatively cheap and simple to sort out. More likely, though, is a problem with the motor (carbon brushes worn ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson dc25 beater bar wont turn - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson ball head wont sit flat on floor - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson dc41 wont suck up on hose and hose pulls back when turned on


... Dyson Bagless Upright Vacuum DC41 Animal

My dyson wont turn the brush roll back on


Hi there,I'm sorry to hear you're having difficulty with your DC18. You may need to reset the brush bar motor - this is simple to do, so please follow the steps shown in our online Support guide: ... Dyson Vacuums

Hi,dyson dc25 overdrive,my brusher's wont go round,i have cleaned the brusher's and filter,loads of suction.the belt is intact and the roller move's feely by hand,could it be the switch


Hi Stephen,I'm sorry to hear you've had difficulty with your DC25 Overdrive. If the brush bar won't rotate, and you've already checked the cleaner head is free of obstructions, it's likely it just needs resetting.You might like to tak ... Vacuums

My dyson dc25 KEEPS 'Spitting' BACK out what I just vaccumed, leaving a trail of debris, Fix it


... Dyson DC25 All Floors Bagless Upright Vacuum

My Dyson DC25 animal is having issues. I believe everything is working correctly except I have realized that the mechanism which switches the hose/valve between the wand and the vacuum head isn't working properly. The two gear pieces that move the hose placement aren't close enough together, so they don't work together. It looks like there is a washer that I could potentially remove on the clear gear piece which would allow it to sit closer to the assembly. Would that work? Currently I am


... Vacuums

I cut all of the hair out of the bottom of the spin-brush on the Dyson Upright Animal Vacuum. Now I dont think I can get the brush back in there correctly. If I squeeze it in there (which it is a VERY tight fit...) then it wont spin. Any thoughts?


Check the roller ends for dirt build up, they pull off and you should be able to clean them out.\015\012The roller should just go back into place if pushed together. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Vacuum stands upright but won't lean back - Dyson DC28 Animal Bagless Upright Vacuum


... Dyson DC28 Animal Bagless Upright Vacuum

My Dyson Animal will not turn on when in upright position or when using the wand. It will, however, start when in the rug vacuuming position (leaned back).


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Hi, i took apart filters to clean in my dyson dc25 and put it back together as said...and now its making a highpitch whinning sound


Hi its Darran at Dyson. It may be worth taking the filter in the ball out and putting it back making sure it has clicked back into place securely. If you need advice on this, please visit our website at www.dyson.com and click ... Dyson DC25 All Floors Bagless Upright Vacuum

The rotating brush on my Dyson DC25 wont go round - can you help - the machine is new but I don't have the manual?


... Dyson DC25 All Floors Bagless Upright Vacuum

Ive got a dc07 dyson just changed the belt on it as i had to since then it isnt picking anything up at all nothings clogged up had it to bits and put it all back together again properly. The hose is working when i take it off its got plenty suction but when i run it along the floor it picks absolutely nothing up any ideas that i havent thought off. Thanks


Sounds like the hose underneath has become detached. Have a look and if its not that come back to me. Also can yo9u check your U Bend is still on as these can come off. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson dco4 has gone loust power and wont switch back on???


How long have you had it? Most of them carry a 5-year warranty! Does yours fall in this category? ... Vacuums

My dyson DC25 won't go back into the upright position. It appears that a silver notch underneath has somehow come out of the sliding groove it should be in and lodged elsewhere. I've only had it 4 weeks!


Hi its Darran at Dyson.We can help re-locate the stabiliser. Please call our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US). Kind regardsDarranDyson Customer Service ... Dyson DC25 All Floors Bagless Upright Vacuum

Need help repairing dyson dc25 retractable stand...the back wheels that retract up during use and return to base when finished.


... Dyson DC25 All Floors Bagless Upright Vacuum

How to put wand back into tube - Dyson DC25 All Floors Bagless Upright Vacuum


Do you want to email me I will show you. You must vedio me thru windows live messenger. [email protected] ... Dyson DC25 All Floors Bagless Upright Vacuum

My dc 25 hose is jammed and wont come out? - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0488 seconds