Having problems with your Dyson DC28 Animal Bagless Upright Vacuum ?

Dyson DC28 handle will not go down

\015 I can see a black spring loaded lever that rides in a track. I can release that black lever and get it to manually lower but when i try to do it the way i am supposed to by using my foot on the head and lowering the handle it will not lower. It feels like i could certainl break something if i were to force it.\015

Answers :

Hi David,

I am sorry to hear you are having difficulty reclining your machine. Based on the description you provided, we may be able to help you resolve this right over the phone. Please call us at 1-866-693-9766 (US) or 0800 298 0298 (UK). We look forward to speaking with you.

Best wishes,

Jessica
Repair Help & Product Troubleshooting for Dyson DC28 Animal Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson DC28 handle stuck in upright position - Dyson Ball DC24 Bagless Upright Vacuum


You DO NOT have to take your machine to a "certified technician" to fix this problem. Stand behind your machine, lean over and look at the front: Right in the center of the opening between the machine and the beater bar head, you will see ... Dyson Ball DC24 Bagless Upright Vacuum

Dyson DC28 handle will not go down


Hi David,I am sorry to hear you are having difficulty reclining your machine. Based on the description you provided, we may be able to help you resolve this right over the phone. Please call us at 1-866-693-9766 (US) or 0800 298 0298 (UK). We ... Dyson DC28 Animal Bagless Upright Vacuum

Dyson handle on dc28 will not go down


... Dyson DC28 Animal Bagless Upright Vacuum

Air escaping from top of handle - Dyson DC28 Animal Bagless Upright Vacuum


Hi there, it's Jack at Dyson.It's part of the design of our upright vacuums that when the machine is standing upright, the suction is diverted to the wand, ready for above-floor cleaning. You can find out more about how the hose, wand and tools w ... Dyson DC28 Animal Bagless Upright Vacuum

I've used my brand new Dyson DC28 once and now the handle will not release from the upright position. What can I do?


Sorry to be blunt... SEND it back. It is rated poorly, -Consumer Reports - is expensive to repair and is not worth HALF the price.... REALLY - you have a valid excuse, send it back and get a Consumer Reports and check out the ratings....\015 ... Vacuums

Got a dyson dc28 animal, it's handle is


... Vacuums

We have a Dyson DC28. The brush no longer turns while vacumming the carpets. Also, the lights on the handle to adjust for different heights do not work. Can you help. I see of no way to get to the belt but I don't think it is broken.


Hi there,I'm sorry to hear you're having difficulties with your DC28. It's probably best if you get in touch with us directly so we can resolve this issue for you as quickly as possible. If a repair is necessary, this should be covered by our ... Dyson DC28 Animal Bagless Upright Vacuum

I have a Dyson DC28 Animal. It worked fine until


Lube the little clip that holds the handle upright (get down at the floorlevel and kinda look for whaer it migh be,, i used just a lilsilicine lube and mine is fine now,,was a hard to unlock handle prior to this,, all is good now.\015\012 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush off dyson dc28 - Dyson DC28 Animal Bagless Upright Vacuum


... Dyson DC28 Animal Bagless Upright Vacuum

DYSON DC28 BRUSH DOES NOT ADJUST - Dyson DC28 Animal Bagless Upright Vacuum


... Dyson DC28 Animal Bagless Upright Vacuum

Dyson dc28 all buttons are blinking - Dyson DC28 Animal Bagless Upright Vacuum


... Dyson DC28 Animal Bagless Upright Vacuum

This is embarassing, but I have just looked at the Dyson DC07 manual and at my Dyson for about 20 minutes, and I can't for the life of me find the wand release button on my actual Dyson.....the manual pictures don't look like the parts on my Dyson....I don't have a hose with a wand release button....the hose just goes straight up inside the handle....Can someone help me? Thanks :)


Hi the wand release button is located directly above the the Cylinder release button. The wand release button looks like the picture below. In order to releease the wand you must firstly make sure the Electrical cable is not wrapped up for storage. S ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the Carpet/Bare knob is moved to the Bare Floor position and then back to the Carpet position. Then the beater bar turns until the handle is placed into the upright position. What might be the problem?


Hi its Darran at Dyson.The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Have Dyson DC 14. When tilt to vacuum, the handle and coiled hose comes away from the unit. The problem started when the little purple ridged curved part on front of vacuum cleaner right below handle came loose and a spring fell out from somewhere--don't know where. I pushed on the purple ridge part and it snapped back on. Now, can't get it loose again, don't know where the spring goes, and handle still comes loose from vacuum.


I'm not positive whether or not this is the wand handle because there are several versions of the DC14. However the device the locks and unlocks the wand in place is pretty similar between all the versions.The first picture is the wand re ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My dyson DC05 has been playing up for a while. The motorhead would start fine with green light on and after a few minutes would stop and light would go green. then the power would go on and off - seemed to only work when I had the handle a certain way. Now no power at all. is there a way that I can check if its the power in the handle section as thats the only way you can turn this machine on? Thanks in advance


As the wires that control the motorhead run all the way down the hose it is a break in the wires you will need to buy the hose assy sorry its not thesort of thing you strip down and repair  ... Dyson DC05 Bagless Canister Cyclonic Vacuum

I need the part # for a Dyson DC07 handle - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there the part number for the DC07 handle is 904247-49. \012if you are in Australia you can get these from vacuumspot.\012Happy Vacuuming! ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How to change belt on Dyson dc 28 - Dyson DC28 Animal Bagless Upright Vacuum


... Dyson DC28 Animal Bagless Upright Vacuum

My dyson dc17 vacuum handle won't recline. - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


The under carriage is misaligned itself or has broken. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

DYSON DC25 WAND AND HANDLE JAMMED - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson dc17 hose will not come out/ handle wont release from machine. i've pulled the metal rod up all the way and the handle still won't come away from the machine so i can't use the hose and attachments. anyone know what the problem might be?


Hi there, it is possible that you have a blockage in the wand/hose assembly which is making this difficult to remove. If you are able to remove it to check for this, please contact our Helpline on 1866MYDYSON so that one of our advisors c ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a Dyson 15 "the ball". The beater bar will only rotate if the vacuum is engaged and the handle at a high angle. The bar stops when I drop the handle to a lower position. The condition is repeatable. Can you provide part and repair instructions?


If air is leaking in somewhere, you will not have any suction.\015\012\015\012\015\012Also there are some possibilities that has to be checked to confirm the fault.The problem is minor but the possibilities are too much for this pa ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dyson dc25 wand stuck wrong way in handle - Dyson DC25 Vacuum


... Dyson DC25 Vacuum

Motor loud I have a dyson dc17..recently when i turned it on and pulled the handle down to vacuum the motor was very loud..put the handle in the upright position it is quiet.any suggestions?


When you put the handle down it turns on the brush roll. you may need to clean the brush roll or replce it if the bearings are bad.also clutch and 2 belts are started when putting handle down for brush operation. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson DC17 Animal does not have enough suction from the wand handle to power the mini turbine head. The wand handle has very little suction.


My dyson doesn't have suction either and nothing is blocked. In fact is was working great the vac that is, but when I used the wand for the first time to get the corners the vac shut off, I checked the hoses, filters and all nothing is blocked. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dyson d17 will only stay on if the handle is tilted back and it's not sucking at all....although it's running. When i stand the vacuum up with the handle upright, it cuts off.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0476 seconds