Having problems with your Dyson DC40 Multi-floor Vacuum DC40 ?
Dyson dc40 suction problem - Dyson DC40 Multi-floor Vacuum DC40
Repair Help & Product Troubleshooting for Dyson DC40 Multi-floor Vacuum DC40
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Dyson dc40 suction problem - Dyson DC40 Multi-floor Vacuum DC40
... Dyson DC40 Multi-floor Vacuum DC40
Where are the filters on the dc40 - Dyson DC40 Multi floor Upright Vacuum Cleaner
This link is for the manual it will give you full instruction on filter changehttp://www.dyson.co.uk/media ... Dyson DC40 Multi floor Upright Vacuum Cleaner
I know this sounds like a dumb problem to have for a vacuum but our 6 year old dyson has so much suction you can't move it across the floor. It only recently started doing this and I haven't done anything to it such as clean the filters in over 6 months. Any help would be appreciated
... Dyson DC14 Telescope Reach All Floors Vacuum
Dyson dc40 sucks from Hose(at the handle) while vacuuming floors
... Dyson Dc40 Multi Floor Lightweight Ball Upright Vacuum Cleaner
I have a Dyson 39 Animal Canister vacuum that was working very well on my laminate wood floor. I have had for two months with no issue. Recently the suction is so strong that vacuum takes effort to m
... Dyson DC39 Animal Canister Vacuum
My Hoover vacuum is not vacuuming the carpets or floors. When I release the tube to use the smaller end the suction works perfect. So i believe the problem is in the rods on the floor or in the part that vacuums the floor! Can you tell me how to fix it , or where can I take it to get it fixed? thanks
Ive just had the exact same problem. In the very back lower portion of the vacuum You will need to take it apart. I guarantee there is a clog. You might also check your belts to make sure they are still on track. ... Hoover Vacuums
I have a Dyson DC24/ all floors, serial number 530-US-D78353 that I have registered already w/ your company. The vacuum is generating suction from the main outlet (that goes to the canister)///but once I place the canister into position..there is no suction from the floor foot. The roller is working/spinning, but no suction..picks up nothing, I have cleaned and rechecked all filters and can not figure out why I suddenly have no suction. Appreciate your input and/or advise where there is a local
... Dyson Ball DC24 Bagless Upright Vacuum
Suction Problem I was vacuuming and stopped to empty the cannister. When I started vacuuming again - the suction wasn't working properly. The vacuum was just pushing stuff around the floor. I cleaned the hair out the brush on the bottom and it still isn't working. It was working fine before I emptied the tube :( I can't figure out what happened.Help!
Greetings from GoVacuum,\015\012\015\012I believe what may have happened is that your vacuum cleaner belt has either broken, or been stretched so far that ithe brushes are no longer spinning fast enough. \015\012\015\012Here' ... Vacuums
Dyson vacuum suction loss - Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum
Clean it outcheck all the filtersI think it has a foam filter as well as the filterless designclean and lubricate the motormake sure it is not leaking and sucking in air from somewhere else ... Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum
I just received an older model Dyson DCo7 animal vacuum. When it is turned on and you are vacuuming, should there be suction at the top of the handle while vacuuming the floor?
No it should not ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Dyson animal D28 suction on floor vacuum mode is so strong I can't push the machine. Last used for hand tools, is there some mechanism that is stuck?
Problems with Dyson DC14 Animal Bagless Vacuum very little suction coming from the hose. cleaned filter and suction has not improved. Please help. Thanks
Two possible solutions come to mind. First off, there is a clog in your hose. If you have another vacuum, try using the hose on that one to **** it out.\015\012If that doesn't work, you may need to have the clutch replaced. Check your warran ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
Dyson dc33 brush bar wont spin - Dyson DC33 Multi floor Upright Vacuum Cleaner Blue- Refurbished
... Dyson DC33 Multi floor Upright Vacuum Cleaner Blue- Refurbished
Replace the belt in a dyson DC33 vaccum - Dyson DC33 Multi-Floor Upright Bagless Vacuum Cleaner
... Dyson DC33 Multi-Floor Upright Bagless Vacuum Cleaner
How to get a dyson DC33 blow outward - Dyson DC33 Multi-Floor Upright Vacuum Cleaner
... Dyson DC33 Multi-Floor Upright Vacuum Cleaner
Dyson dc40 no suction at bottom - Dyson DC14 Bagless Upright Cyclonic Vacuum
HI, it's Jim from Crucial Vacuum!\012\012When it comes to your vacuum having poor suction there are a few general maintenance procedures you can easily do to help your Dyson's overall performance. \012\012After every use, make sure to ... Dyson DC14 Bagless Upright Cyclonic Vacuum
Dyson slim stick keeps turning off - Dyson DC-35 Digital Slim Cordless Multi-Floor Vacuum - -
... Dyson DC-35 Digital Slim Cordless Multi-Floor Vacuum - -
How to change the clutch on a dyson dc41 - Dyson DC41 Multi Floor Upright Vacuum
... Dyson DC41 Multi Floor Upright Vacuum
Recently purchase SC-N500 vacuum cleaner. Worked well only the first 2 times I used it to clean up plaster dust from floor after sanding. Since then it has not worked at all well wiht very poor suction. Fluff gets stuck in the hose and has to be manually removed. Suction power is very poor. I have washed the filter to remove the dust with no difference. Who do I contact in Brisbane to service or assess the problem further.
... Sanyo Vacuums
Dyson dc25 no suction air blows out of ball - Dyson DC25 All Floors Bagless Upright Vacuum
... Dyson DC25 All Floors Bagless Upright Vacuum
I just purchased a DC07 Dyson vacuum cleaner. It is not vacumming my floor - I have hardly any suction at all. Do I need to activate something in order to initiate the suction?
With vac upright suction is sent to the hose ie top of vac handle when handle is tilted down to the user vacuum position it should send the power suction to the floor also make sure collection bin it in securely that make be the problem ... Vacuums
The roller on my Dyson vacuum has stopped rotating (I still have suction) I have checked the belt (not Broken) and have checked and cleaned the roller and spindle and also checked the "auto" button setting on the vacuum but to no avail ... Anybody have any clue as to the problem Many thanks
... Dyson DC07 Bagless Upright Cyclonic Vacuum
Dyson wand lost suction - Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow
... Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow
No suction on dyson dc07 - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum
... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum
Proteam Pro force 1500xp Upright vacuum... When I switch to the carpet setting I have no suction power but the beater bar is turning. If I switch back to the floors setting, the suction is excellent. Wondering if the problem is in the on/off switch?
Just undo the screws on the front part of the switch assembly, carefully check all the leads to the switch. Mine slide off all the time as the switch is poorly designed and subject to damage when the darn thing tips over (easily!!!) new switches are ... Proteam ProForce® 1500XP Bagged Vacuum