Having problems with your Dyson DCO7 Upright Vacuum ?

My dyson dc07 filter catch has snapped off and it's stuck


Answers :

You need to take off the little vent that goes around the filter. this is hard. you take off the cover for the hepa filter (under the dustbin) there are three catches. you take off the two torx style screws under the vent and then you work the vent until it has come off. i still don't know how i did mine. then you can use a flat head screwdrive and hammer to put the latch in or out
Repair Help & Product Troubleshooting for Dyson DCO7 Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dyson dc07 filter catch has snapped off and it's stuck


You need to take off the little vent that goes around the filter. this is hard. you take off the cover for the hepa filter (under the dustbin) there are three catches. you take off the two torx style screws under the vent and then you work the vent u ... Dyson DCO7 Upright Vacuum

Dyson DC07 The plastic pre filter catch snapped on my Dyson. I have a replacement already, but can't figure out how to remove the bottom of the broken one. It looks easy enough to slide/snap the new one in but accessing the old one isn't easy. What do I need to do to get it out?


Turn your dyson over so you can get to the bottom undo the screw and then you can see the bottom of the clip a gentle tap with with a screw driver blade will knock it out and the other one slips in ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC07 Filter Release Catch removal


If its the part im thinking of its a small spade like catch thats glued into a hole in the chassis normally id lay the machine on its front and gently tap the old catch out with a flat end screwdriver and a small hammer be carefull its very brittle ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The pre filter catch on my DC07 has snapped. I have the replacement, but can't get the bit left in the filter out! any ideas?


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC07 Filter Release Catch removal


Yes sorry i know what mean you need to remove the motor casing to reduce the risk of breaking any parts. Lay dyson on the front and remove the bottom plate and roller bar. Now you need to remove the belt from the motor pin lay on left side look t the ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC07 i have the dyson dc07 and i want to clean the filter but i have lost the instructions. does anyone know how to clean the filter or where i can get a copy of the user manual??


Http://www.analogstereo.com/dyson_vacuum_owners_manual.htm ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do you remove the HEPA filter on Dyson DC07


I use a screw driver to pry them up.\015\012Joe ... Dyson Vacuums

Removing filteron dyson dc07 if stuck


Hi its Darran at Dyson.We would recommend trying to twist the filter in the casing until it becomes loose. Sometimes, there can be a small build up of dust around the edge of the filter which can make it difficult to remove from the casi ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson DC07 animal does not have the suction it once had I saw a dyson program that showed a filter in the top of the canister I was just aware of the filter around the wheel. Is there one on top of the canister and how do you get to it


Hi\012\012The DC04 Dyson has a filter at the top, but the DC07 has one at the side on the bottom and one underneath the cylender.\012\012Take all the parts off your dyson and throw them in the washing machine and then put them ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How many filters does a dyson dc07 have - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there, the DC07 has 2 filters. A pre motor ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Shroud release catch broken on dyson dc07


... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do you clean hepa filter on dyson dc05 - Dyson DC07 Bagless Upright Cyclonic Vacuum


You can use compressed air to blow it out ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Clogged filter on dyson telescope - Dyson DC07 Bagless Upright Cyclonic Vacuum


This video will give you all the solutions you need ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I have a Dyson DC07 Yellow Vac, I use this vacuum professionally and clean it after every job so there is no issues with the filter which are replaced regularly. When you turn it on it makes a noise as if it were blocked....I have checked all pipes, hoses and now disassembled the machine to the point where the motor is out. I have found that a small rubber valve or bleed valve (Attached to the right hand detachable filter housing and activated via an internal spring) is popping when the vac


Hi, Where exactly is this spring? ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson air muscle hose stuck in wand - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

How to clean filter on dyson vaccums - Dyson DC07 Bagless Upright Cyclonic Vacuum


The filter on the side of the of the unit can be washed out with warm soapy water leave for 24hours to dry somewhere warm do not tumble dry the filter under the bin just replace as the cannot be washed. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My Dyson DC07 is screaming load. I have replaced the lifetime filter and the hepa filters. I also replaced the clutch and brush. I took the canister apart and cleaned it. It works, but is so loud something else must be wrong


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Removing the filter on Dyson DC07


On the 07 model it is on the right side push clip and pull inside will be a foam filter wash and dry ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Want to clean shroud of DC07, have done it before, but this time (and following users manual directions) the bin release catch doesn't seem to be enough to get the clear bin off. It's so stuck together! Help?


... Dyson DC07 Bagless Upright Cyclonic Vacuum

I have a Animal Dyson DC07. While cleaning the filter I laid the vacuum down . Now I can not get it to stand upright


Have a look at the following link:\015\012\015\012http://www.dysonmedic.com/DC04%20Folder/DC04%20upright%20fix.html\015\ ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC07 stops working after a few minutes. It works again after a further 10 minutes and then cuts out again. I have cleaned the filter and checked for blockages but is still cutting out. Can anyone help?


Have you tried calling Dyson? I had a problem with my Animal, and their tech department talked me though the fix. Worth trying them first. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson dc07 brush bar seems to be only spinning at half speed. Leaves three light streaks in the vacuum marks like somethings just dragging. Brush bar is clear and filters are clean. Seems like there's slipping somewhere.


The belt is stretch and so it is slipping on the motor shaft. You need to change the belt. Here is a link for the\015\012instructions on how to change the belt and a link for the belt you need: ... Dyson DC07 Bagless Upright Cyclonic Vacuum

We have a Dyson DC07 vacuum. I need to know how to clean the filter. I lost the manual. Thanks


Here is a link to a manual you can view:Dyson DC07 Manual ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The motor on my Dyson Animal DC07 is getting very hot. I've always kept the filters and such clean. Is there any maintenance I am to be doing with the motor?


Hi its Darran at Dyson.From your description of the problem, it sounds as though there is a lack of airflow to the motor which is caused by a blockage in the machine or a dirty filter. To check your machine for a blockage, ple ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc07 How do you take the tank apart to clean the bagless filter?


You can take the clear part off pretty easily, but the upper cylcone section is held on by three star screws on the upper -handle end. After taking those off, the handle comes off and it has a long stick that runs down the center of the cylinder. T ... Dyson DC07 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1377 seconds