Having problems with your Dyson DCO7 Upright Vacuum ?

Dyson absolute wont turn on in upright position


Answers :

Hi there,

I'm sorry to hear you're having difficulty with your Dyson vacuum. This issue sounds unusual, and we'd appreciate the opportunity to provide further assistance. Please call our customer Helpline on 0800 298 0298 (UK), or 1-866-693-9766 (US) - it will help if you have the machine to hand when you call, so we can run through some troubleshooting checks over the phone with you.

We'll look forward to hearing from you.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com
Repair Help & Product Troubleshooting for Dyson DCO7 Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson absolute wont turn on in upright position


Hi there,I'm sorry to hear you're having difficulty with your Dyson vacuum. This issue sounds unusual, and we'd appreciate the opportunity to provide further assistance. Please call our customer Helpline on 0800 298 0298 (UK), or 1-866-693-97 ... Dyson DCO7 Upright Vacuum

Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the Carpet/Bare knob is moved to the Bare Floor position and then back to the Carpet position. Then the beater bar turns until the handle is placed into the upright position. What might be the problem?


Hi its Darran at Dyson.The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

DC17 Animal Bagless Upright Cyclonic Vacuum: dyson animal wont turn off...


Dyson has switch problems, needs new switch. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The brush wont turn on my dyson DC 14 - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Sounds\015\012 as if you need to replace the brush belt.JimLet me know if this helps. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Wont click back into upright position - Dyson DC07i Bagless Upright Vacuum


... Dyson DC07i Bagless Upright Vacuum

My Dyson Animal will not turn on when in upright position or when using the wand. It will, however, start when in the rug vacuuming position (leaned back).


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc25 beater bar wont turn - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson wont turn on and its a bit smelly - Dyson DC07 Bagless Upright Cyclonic Vacuum


It sounds like the motor has overheated and has now been irrepairable damaged. The motor has a built in over-current trip to protect itself (and you if it seriously overheated and caught fire). This normally automatically resets itself, however ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson dc14 wont turn on - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

On my dyson dc 28 the carpet cleaning bar turns easily by hand, but does not turn on when the cleaner is reclined from the upright position. The white light illuminates when preseed, but the red light does not illuminate even though the motor is running. Thanks


... Dyson DC28 Animal Bagless Upright Vacuum

My Dyson will not turn on unless I pull the handle back. I have take the entire vacum apart cleaned all blockage and it still will not turn on in the upright position.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dyson dc14 wont turn on at all - Dyson DC14 All Floors Upright Vacuum Cleaner


Hi I would suggest you first check the Fuse in the plug. This is quite common. \012\012If after chnaging the fuse the machine still doesnt work then please come back to us. Let us know that you have checked the fuse andthe machine still w ... Dyson DC14 All Floors Upright Vacuum Cleaner

Dyson Absolute won't start in upright position...


... Dyson DCO3 Absolute Bagless Upright Cyclonic Vacuum

Dyson dc14 will not return to fully upright position NEED HELP~!


Hi, Try this quick repair and see if this fixes your Dyson: This is a frequent problem that we see come in on Dysons. If this doesn't fix it, please feel free to just use the clarification request and let me know this didn't fix it. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

DYSON DO4 ABSOLUTE. HAS POOR SUCTION AT REVOLVING BRUSHEAD, BUT IN UPRIGHT POSITION USING TOOLS SUCTION VERY STRONG. NO BLOCKAGES AND B ELTS INTACT


... Vacuums

Have a dyson dc07, the belt snapped on it, changed the belt & now the rollers are constantly turning in upright position... Any advise


... Vacuums

My Dyson vacuum cleaner wont close & Open to the upright position to allow vacuuming to take place


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush does not turn - Dyson DCO3 Absolute Bagless Upright Cyclonic Vacuum


Drive belt is broken you have to take the plastic covers off the bottom to replace the belt ... Dyson DCO3 Absolute Bagless Upright Cyclonic Vacuum

Motor loud I have a dyson dc17..recently when i turned it on and pulled the handle down to vacuum the motor was very loud..put the handle in the upright position it is quiet.any suggestions?


When you put the handle down it turns on the brush roll. you may need to clean the brush roll or replce it if the bearings are bad.also clutch and 2 belts are started when putting handle down for brush operation. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson won't go back into upright position to engage suction


The dyson.com website had a solution for this particular problem. Just press in a button in the area around the right wheel while lifting the rear of the vacuum up. This allows the base to roll forward enough to go back into the upright position. I ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My machine (Hoover Wind Tunnel - bagless) is only 1 yr. old. The agitator brush doesn't turn all the time. I know it's not supposed to turn when in the upright position. However, it only seems to work when I have the setting on high. When I stop, but have not put the machine in the upright position, it stops again and then slowly starts moving. Could the V-belt be worn out already? In the owner's manual it states that this belt is not normally replaced. The exact same thing happened with my old


Sounds like you should do two things:\015\0121- Remove and clean the beater brush of all debris as best you can. At the end of the brush you will see a hard rubber piece, at both ends, that holds it in place in the body of the vacuum.\015\012Add som ... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

Dyson wont staND UPRIGHT


Hi its Darran at Dyson. So that we can help resolve this, please call our Helpline on 0800 298 0298. One of our advisors can through some simple checks with you which will hopefully resolve the problem. We look forward to hea ... Dyson DC25 All Floors Bagless Upright Vacuum

Beater bar on Dyson upright won't turn when handle is lowered


I have finally fixed my sister's dyson dc 15 beater bar problem. It was just 2 tiny broken wires connect to circuit board lead to the beater bar. The wires broke where they go through the black rubber gommet. You need a torx ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dyson Rollerball wont clikc into unpright position.


I've just had the same problem! The small metal poles either side of the red push bar at the bottom of the hoover should both be in a groove/runner. The problem is that one or both of the metal poles has popped out of the runner and is stuck in one o ... Dyson Ball DC24 Bagless Upright Vacuum

Eureka 4870 brush won't stop turning in upright position


There will be a linkage that as come loose and not operating the limit switch to turn it off, try looking at 23. Idler Clamp Assembly on the link below. ... Eureka Smartvac 4870 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0677 seconds