Having problems with your Dyson Vacuums ?

Brush rollers don't go around - Dyson Vacuums


Answers :

If your Dyson has stopped picking up larger items of dust, but still picks up the small items, then it might be that the brush roller has worn out and needs replacing.a roller brush in the vacuum that is not turning properly. Check this options before replacing the brush roller:---
\015\0121) Be sure the vacuum cleaner power cord is disconnected, then lay the vacuum cleaner flat on your working surface.Disassemble the vacuum cleaner,by removing its screws.
\015\0122) Find the brush belt where it is attached to the brush roller and check to be sure the belt is in place on the roller at one end and on a metal spindle on the other end.
\015\0123) If the belt is broken, you will need to replace it.But if the belt is out of its way then readjusting the belt will solve the problem.\015\0124) If the belt is properly fitted but if the vacuum brush roller feels jammed then,To get your jammed brush roller working again, locate the flat plate on the bottom of your vacuum cleaner. Remove the screws that secure the plate to the vacuum cleaner, then remove the screws and the plate. Pull one end of the roller upward, away from the vacuum cleaner, and slip the belt off the roller. The roller should snap out of its position when you give it a tug. Check the channel in which the roller was positioned. In it, you are likely to find fibers from the carpet that have wound around the roller or debris that has become jammed against the roller. Remove all debris, slip the belt in place on the roller, then replace the roller and give it a few turns to make sure it is now free.Then check by connecting to power and see if its working or not.\015\012If not then the brush roller has to be replaced.\015\012----------\015\012\015\012\015\012\015\012Thanks. Keep updated for any more query. You can rate this\015\012solution and show your appreciation
\015\012
Repair Help & Product Troubleshooting for Dyson Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Brush rollers don't go around - Dyson Vacuums


If your Dyson has stopped picking up larger items of dust, but still picks up the small items, then it might be that the brush roller has worn out and needs replacing.a roller brush in the vacuum that is not turning properly. Check ... Dyson Vacuums

My Dyson Animal has good suction and works fine for actually picking up dirt, but when I use the vacuum with the roller, I hear a grinding/rumbling noise. Its only when I use the vacuum with the brush rotating. It does not happen hen I shut the roller brush off. The belt is fine. I cannot figure out what is wrong as there are no clogs, debris, or foreign objects stuck in the brush or in the belt. The noise seems to be the only issue. The vacuum picks up fine. It just doesn't sound right a


Trace the path of the suction into the tank and see if there is anything loose or ingested.\015\012Also, remove the brush and clean as best you can. Perhaps there is something caught in it. Lubricate where it makes sense with some WD40. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I was vacuuming my room and all of a sudden I hear this loud noise, then notice the roller brush isn't spinning. Thinking too much hair was caught I separated it from the rod and hose to clean it out, but noticed that the roller brush didn't move at all while I was cleaning it. I've cleaned the brush before and it would roll around with little effort, but this time I couldn't move it at all. After removing hair and string I put the vacuum back together and started it up, but the noise continued,


It sounds like if the rod is clean then there is debree inside the roller where the rod fits in too. ... Hoover Platinum Cyclonic Bagless Canister Vacuum With Power Nozzle

Dyson dc07 The rotating brush on the bottom of my vacuum was filled with strings. I removed the brush by undoing all yellow plastic screws from plate. Removed all strings and replaced as best I could and it was hard to get the brush back in and the belt around it. I dont have my manual but it fits so it should be correct....? Right? No, not true, because when I turn it on and try to and vacuum (by lower canister with foot release) it makes that terrible ratching sound). Please help


The loud ratching is a warning to tell you that there is something stopping the roller bar from rotating this is a very common thing lay the machine on the floor front side down take off the bottom plate and just check the belt is in the centre of th ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Last night as I was vacuuming, I noticed that the belt stop indicator light was on. I pulled out the hair that had gotten tangled around the brush in hopes of solving the problem. It didn't change things. I then unscrewed the entire bottom piece to take out the brush roller. I removed hair from the end piece of the brush roller and reattached the belt; however, I cannot figure out where the microchip is supposed to go so that I can reassemble the base piece by screwing it back together. It seems


Not sure what you mean when you refer to a "microchip" but maybe it is a sensor that works with the belt.\015\012Anyway, if you Google the make and model number of your vacuum you can probably get an exploded view or owners manual that might indicate ... Vacuums

Non working roller brush on dyson dc25 vacuum cleaner


... Dyson DC25 All Floors Bagless Upright Vacuum

I caught a hidden shoe lace in my dyson 17 beater head....shut it of quickly....removed the lacing from around the head....loosened the three screws on the botton of the head....cleaned it out from whatever little dust there was....checked the heads belt reset the roller brush into the head...but alas no beater brush action. what to do?(I've had my dyson about5 months....HELP!. thanks, Jan Selman


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Second time...wound cord around vacuum brush roller


... Vacuums

The roller-brush on my Dyson DC17 makes a terrible noise at all times. I removed the cover and extracted all debris from this area, making sure all connections were as secure as possible, but that didn't improve it any. The vacuum still seems to vacuum okay, but the noise sounds horrendous. How do I fix it?


Check the belt to see if a layer or piece of it has come loose and is flappping around.\015\012Check for any loose parts that could be getting hit by the brush or other moving parts.\015\012Make sure the brush it tightly in place and can ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson DC14 animal vacuum does not turn on however the roller brush does come on.The hose was clogged and that was cleared but vacuum still will not turn on.


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How to remove brush roller from Dyson DC44 - Dyson DC44 Animal Handheld Vacuum Cleaner


... Dyson DC44 Animal Handheld Vacuum Cleaner

Dyson dc33 bagless roller brush won't turn - Dyson DC33 Bagged Upright Vacuum


... Dyson DC33 Bagged Upright Vacuum

My Dyson DC17 Animal brush roller makes noise when it is spinning but not when using the wand. The belt around the roller seems fine and it is not plugged. What else can I check for?


Need replaced belt and Brushbar Assy\015\012Brushbar Assy part no:911961-01\015\012Belt part no: 911710-01 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC17 Animal brush roller makes noise when it is spinning but not when using the wand. The belt around the roller seems fine and it is not plugged. What else can I check for?


Hi its Darran at Dyson. You may find it useful to remove the soleplate from the base of the machine and make sure that the brush bar is fitted correctly. Once this is done, make sure there are no hairs or threads wrapped aroun ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My wife had some thing caught in the front of our dyson dc17. Now when the beater brush is running it makes a noise. It still vacuums alright. I cleaned out the area around the beater brush.


It could be the belt has striped some of the teeth and may need replacing or the teeth on brushbar here is video how to check ... Dyson DC33 Animal Bagless Upright Vacuum

How to take roller brush out of dyson - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Roller brush on DC40 won't work - Dyson Vacuums


... Dyson Vacuums

How do you remove the roller brush from a dyson vacuum cleaner


You will need a special bet tool. you can buy one from ebey. search for "dyson special bet tool" it is about $15. don't use your hands as the belt is very tight and you will hurt your fingers. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I was in the midst of vacuuming with my Dyson Animal when it stopped working. It smelled as though part of the motor burned up (there was hair and string wrapped around the brush so I stopped to remove it). Any ideas on an easy, quick, and inexpensive fix? Thank you!


Hi there,For guidance on clearing any remaining threads or hair from around the brushbar and resetting the machine, please follow the steps shown in the video below. Please note, the brushbar will never rotate when your machine is upright, so ... Vacuums

Roller brush does not turn when vacum is on - Dyson DC07 Bagless Upright Cyclonic Vacuum


The belt is broken or stretched. You can get replacement belts for the DC07 here:Belt for DC07 with clutch ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My roller brush no longer rotates? - Dyson DC07 Bagless Upright Cyclonic Vacuum


DC07s have two drive ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush does not go around - Dyson Vacuums


Most likely your belt is broken or has slipped off. Go to the following web page, and it has a video of how to change them and fix the problem:\015\012 ... Dyson Vacuums

I have a dyson dc07 upright which no longer picks up lent and hair. The roller brush is not spinning when the vacuum is turned on. How can I tell if it is the belt that needs to be replaced or the clutch and belts?


Need replaced Clutch Assy and Brushbar \015\012\015\012Clutch Assy part no:900252-04\015\012\015\012Brushbar Assy part no:904174-01\015\012\015\012try cleaning all Hose\015\012 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush roller does not turn. - Dyson Vacuums


You need a new drive belt. you can get them here:www.vacbelts.com ... Dyson Vacuums

I replaced the clutch in the dyson dc14. it isnt making that terrible noise anymore....thank god!! but the roller brush is not moving when the vacuum is in use. whats wrong?


The "horrible noise" you were hearing before wasn't the clutch! It was the roller brush. If the brush is not turning, all you are doing is burning out your new clutch. Reasons for the brush not turning: there is hair, carpet fiber or other matter wra ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1055 seconds