Having problems with your Dyson Vacuums ?

Powerbar will not come on - Dyson Vacuums


Answers :

Hello,

if it does not power up, then it means its having a power problem. it might have worked fine in the past, but that's electronics for you. Power surge, irregular power supply, excess power supply, etc can affect the unit thereby not making it to power on.

This unit must have a power supply board in it where power enters from the mains. A capacitor, fuse, diode, etc may have been defective on the power board and maybe that's why its not making the unit turn on. There might also be some disconnection or something, inside the unit which is not making it to power on.

To actually find out what's wrong, you need to disassemble the unit with a screw driver and check what's wrong. You will be needing a meter in order to test the components on the power board, once you detect any bad component, you can make necessary replacement at any electronics accessories store withing our vicinity. This is the only way by which you can detect the problem.

Of course, testing the power board with a meter will require someone that has the ability. So it you can't, then you might be needing the help of a repairman or you can call a friend that has the ability to help you out.

I wish you the best of luck.

Take care.
Repair Help & Product Troubleshooting for Dyson Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Powerbar will not come on - Dyson Vacuums


Hello,if it does not power up, then it means its having a power problem. it might have worked fine in the past, but that's electronics for you. Power surge, irregular power supply, excess power supply, etc can affect the unit thereby not ... Dyson Vacuums

Have Dyson DC 14. When tilt to vacuum, the handle and coiled hose comes away from the unit. The problem started when the little purple ridged curved part on front of vacuum cleaner right below handle came loose and a spring fell out from somewhere--don't know where. I pushed on the purple ridge part and it snapped back on. Now, can't get it loose again, don't know where the spring goes, and handle still comes loose from vacuum.


I'm not positive whether or not this is the wand handle because there are several versions of the DC14. However the device the locks and unlocks the wand in place is pretty similar between all the versions.The first picture is the wand re ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson DC23 Vacuum shut off and came on. Thought it was a problem at the electrical outlet as when moving plug it would come on again. Seen canister was full, emptied it and cyclone was quite plugged up so poked out the dirt. Had dog hairs in it as well as some ashes I had just vacuumed. Plugged unit in again and pressed switch. Will not come on. Tried another outlet. Is there a reset button somewhere or could the ashes have seized the motor. What can I try besides taking it to a repair sho


... Dyson DC23 Bagless Canister Cyclonic Vacuum

Dyson Airmuscle attachment won't come out - Dyson DC28 Animal Vacuum with Airmuscle Technology


... Dyson DC28 Animal Vacuum with Airmuscle Technology

A srong odor comes out of vacuum when using. - Dyson DC07 Bagless Upright Cyclonic Vacuum


Is it a burned rubber odor? If it is it means that the belt is worn and needs to be replaced. Here is a link for replacement belts:Dyson DC07 Belts ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I have a dyson dc17 animal vacuum and hair and dirt gets trapped in the top part of the vacuum. does this come apart?


You can take this apart. There is a very good detailed explanation of how to do this here: http://www.exonotes.com/content/node/4\012\012I have done it. Now it sucks like new! ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson dc24 seal has come off - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum

Dyson dc17 My dc17 has great suction with the attachment but when i try to vacuum my carpet it hardly has any suction. I just bought this on ebay and the seller told me to pull the pole all the way out but it doesn't seem to completely come out. am i doing something wrong? Is the metal pole suppose to come all the way out unless you are using the attachment?


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson DC14 animal vacuum does not turn on however the roller brush does come on.The hose was clogged and that was cleared but vacuum still will not turn on.


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Smoke coming from my dyson 08 - Dyson Vacuums


The motor is burnt up. take it to your vacuum store and do not use it. ... Dyson Vacuums

Hello! The suction in my Dyson animal is very poor. I discovered small holes in the internal hose, but even after a quick duct tape fix, still having issues...sounds like the seal from the canister to the vacuum is leaking air. I know I need a major repair but my mother in law is coming tonight! Any suggestions? ~Lisa


Or you can do this for free:\015\012\015\012http://www.ehow.com/how_5870417_modify-dyson-prefilter-suction.html ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Wand will not come out of machine - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc25-cleaner head keeps coming off when vacuuming


Hi Michael,I'm sorry to hear about the issue you're having with your DC25. If the cleaner head won't stay attached to the machine in use, you may want to make sure you're attaching it correctly. The link below may help: ... Dyson DC25 All Floors Bagless Upright Vacuum

Hi i have a dyson DC 05 (yellow) vacuum which is playing up. it refuses to come on, but sometimes when you waggle the flex a bit it works after a while. Any ideas how I can get into the flex housing?


Thats your trouble You have a Dyson ... Vacuums

My Dyson DC17 vacuumn system is stopped up, the clog is in the top part of the vacuum before it drops the dirt into the cylinder. Does the top part of the canister come off so that you can get into the tubes that are clogged.


... Dyson Vacuums

The Dyson DC14 Vacuum cleaner is coming on - the fuse is ok


I have a dc14, and I want to know why I can only vacuum about 2-3 feet in front of it, and then it starts to make a racheting noise. I have to shut it off, return to upright, then turn it back on, to repeat the whole frustrating process. solution for ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My dc 25 hose is jammed and wont come out? - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

The upright lock and spring has come out of my dc14 dyson vacuum. How do you get it back where it belongs?


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Problems with Dyson DC14 Animal Bagless Vacuum very little suction coming from the hose. cleaned filter and suction has not improved. Please help. Thanks


Two possible solutions come to mind. First off, there is a clog in your hose. If you have another vacuum, try using the hose on that one to **** it out.\015\012If that doesn't work, you may need to have the clutch replaced. Check your warran ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Our Dyson keeps stopping in the middle of vacuuming and then it will not come on except when you lower it and then periodically it will go either way.


Hi its Darran at Dyson.Your machine is fitted with a thermal cutout which will stop your machine should the motor become too hot. After an hour or two it should come back on. this is caused by a dirty filter or a blockage. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I have a dyson animal dc17 vacuum and it totally died. Now I can't figure out which wires go where when I install my new motor. (motor #: 160906G) Do you happen to know where the various color wires go or a place I can see a diagram of the motor with wires attached? I should have taken a photo of it before tearing out the old motor. I don't know where to connect the three coming out from the upright portion of the machine and the red seems to go to a switch (?) and there is a black (connected t


... Vacuums

I have a Dyson DC07 animal ( purple). If you are standing behind the vacuum I am missing the lower righthand connection...therefore whatever is suctioned up comes out at that point just over the back wheel. I would like to purchase a replacement for this part. In the manual I believe this part is labeled as C. Can this part be purchased separately ?Please Help....


Hi there SmartAlec from NelsonVacuums.com.au i am not sure if you are based in australia but if you are you can ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson vacuum cleaner - nothing coming into the chamber. shuts off in upright position. I already cleaned the fuzz out of the chamber next to the chamber. Please help. Only 2 months old Thanks, L. Gordon


... Vacuums

Dyson slim, all the suction is coming through the hose and not in the power head of the vacuum


This is a very common problem with the DC18s. basicly the carraige assy needs to be replaced. what happens is that there is a valve that is engaged when you recline the vaccum. well when the peice that is broken the valve wont move so it is stuck wit ... Sharper Image Dyson Slim DC18 All Floors Vacuum

My handheld dyson won't charge but when I hold the trigger the lights come on?


Hi Lynora,I am sorry to hear you are having difficulty with your DC16. Based on the details you provided we would appreciate the opportunity to trouble shoot with you over the phone to determine the best solution. Please call us at 1-866-693- ... Dyson DC16 Root 6 Bagless Handheld Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0693 seconds