Having problems with your Dyson Vacuums ?

Stick vacuum DC35

\015 I have had my dyson DC35 for about 6 months now with now problems. I use it on my hard wood kitchen floors each night. The last couple of weeks I have noticed it really not doing its job, leaving debris behind and 'surging', hard to explain but it seems to cut out repeatedly when in contact with the floor. If I lift the whole thing of the floor, no surging. If I take the head off and just use the stick end, no problem. Its when the head is on and in contact with the floor. The head has been cleaned out and there are no obstacles stuck in the neck. Any suggestions\015

Answers :

Hi Cathy, it's Jack at Dyson.

DC35 will make a pulsing sound to indicate that something is blocking the airflow through the machine. Although I note you've already checked for this, the issues you've described strongly suggest a blockage inside the motorised floor tool that you may have missed. This would also explain the loss of performance you've noticed.

In this instance I would encourage you to get in touch with our experts directly so we can walk you through some troubleshooting checks, as we should be able to resolve this right over the phone. You can reach us on 0800 298 0298 (UK), 1-866-693-9766 (US), or 1-877-397-6622 (CA).

We'll look forward to hearing from you.

Best wishes,

Dyson Online Customer Support
Repair Help & Product Troubleshooting for Dyson Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Stick vacuum DC35

Hi Cathy, it's Jack at Dyson.DC35 will make a pulsing sound to indicate that something is blocking the airflow through the machine. Although I note you've already checked for this, the issues you've described strongly suggest a blockage insid ... Dyson Vacuums

My Electrolux Pronto is not charging. When I put the Vacuum stick on the charging stand, the purple light goes on for about 5 seconds and then it will be off. I tried to clean both the terminal (Vacuum stick and the charging stand) but the same thing happens. What can I do to make it work?

Call electrolux there was a battery recall ... Electrolux EL1000A2 Pronto Bagless Stick Cyclonic Vacuum

Clogged vacuum Rather stupidly, my boyfriend 1) were vacuuming without a bag and 2) vacuumed up a big piece of cotton from a sofa cushion. And now it's making a horrible noise and I see it vibrating where the tube connects to the machine. When you look inside there's a white thing sticking out but it looks like it's part of the vacuum. If it's a clog, how do you fix it? I tried unscrewing the tray the bag sits in but it won't budge.

You can start by taking off the bottom plate or top cover, which ever comes off, that is where the inlet starts going in and hopefully the clog is there. Could be in the hose also. But without the complete model number I can't look it up to see a p ... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum

Rainbow SE I turned the vacuum on and it worked to do one room Then I shut it off to wait until my husband got of his call. I realized that their was cloggage in the vacuum part that vacuums the carpet and unclogged it. I then tried to turn on and it was dead. I have the water filled just above the stick.

The clog may have over heated the motor, usually if you unplug it then after little while, try it again. If it still won't go, does the separator turn easily or is it bound up and won't turn. Take it off and see if the motor will run(without water) ... Rainbow E series Canister Wet/Dry Vacuum

The Panasonic MC-V7515 has two belts. The local vacuum repair guy says he only has a part number for the drive belt, which is UB-9. How do I find a replacement for the other belt, the one which directly drives the beater bars? By the way, this vacuum has great suction, but otherwise is far inferior to my previous Panasonic vacuums. The cheaper models aren't a good buy--stick with the more expensive models.

... Panasonic MC-V7515 Bagged Upright Vacuum

I have a Dyson DC35. It has just stopped working. The green light on the charger is on and the vacuum is plugged into the charger, but it is like the vacuum is completely dead.

... Vacuums

I have a Dyson DC35. It has just stopped working. The green light on the charger is on and the vacuum is plugged into the charger, but it is like the vacuum is completely dead.

Aside from mechanical issues or broken wiring, ALL rechargeable batteries have a finite life; measured in the number of times they are charged, the temperatures they are exposed to, the charging currents / voltages they are exposed to, and so on. ALS ... Dyson Vacuums

My Stick vacuum is not picking up efficiently. The

... Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne

Shark stick vacuum model EP600F

... Euro-Pro Vacuums

Vacuum won't turn on - Dirt Devil Versa Power 31 Stick Vacuum

... Dirt Devil Versa Power 31 Stick Vacuum

When I took the base cover off the vacuum to clean the roller, a metal piece that is bent in half, as well as a white plastic stick piece came flying out. I think it might have to do with holding the vacuum in an upright position, but I don't know where it goes. Help!

They go in the slot beside the right wheel. Metal spring first, (the open ends facing away from front of vacuum base. The white nylon piece lays parallel and directly on top of the metal spring, round edge up, and aligned with the open ends of the me ... Eureka 411A Upright Vacuum

My Hoover Platinum LiNX Cordless Stick Vacuum beater bar is not turning. After removing some clogged hair and items...the vacuum cleaner has suction, but the beater bar will not turn. What to do? The belt is still attached and will turn manually.

... Hoover Platinum LiNX Cordless Stick Vacuum

Can I buy a motor set part for dyson dc35 - Dyson DC35 Handheld Vacuum

Try this link belowhttp://www.vacpartswarehouse.com/Dyson-DC35-Handheld-s/3899.htm?searching=Y& ... Dyson DC35 Handheld Vacuum

Dyson dc35 max button gets stuck - Dyson DC35 Handheld Vacuum

Hi there, it's Jack at Dyson.\012\012I'm sorry to hear you're having difficulty with the Max button on your DC35. In normal use, when pushed and released it should stay in the power mode you set it in, until you press the button again.\01 ... Dyson DC35 Handheld Vacuum

Dc35 does not work - Dyson DC35 Handheld Vacuum

... Dyson DC35 Handheld Vacuum

Vacuum tube is obstructed at curve next to roller. I'm unable to clear it using a chop stick. vacuum functions when tube is used w/ attachment for small areas.

Do not give up... Now try wire coat hanger to clean out. Restriction of air flow will burn out your motor, eventually. ... Bissell Vacuums

No suction vacuum won't pick up -- I've checked the bag, hose...and it seems to have no sucking power. The internal hose may be jammed (I vacuumed up a lot of shredded paper), but nothing as far as I can stick in fingers in. I don't have a metal coat hanger to slip down, but I'm afraid that might tear the hose and then the darn thing won't work anyway. :o(

If it is plugged, try using a tape measure, i know it sounds stupid but it will work to unplug your line and will not tear your hose.. ... Kirby G4 Bagged Upright Vacuum

The bottom bar that encases the brush is flush to the floor when using the vacuum. This causes the suction to "stick" the vacuum to the floor (lamenate) and also as there is no ground clearance debris is just pushed around. We have to nearly stand the thing upright to get the ground clearance to be enough for things to start being sucked up. I have taken apart, re-assembled etc and nothing is working.

I'm having the same problem.  The bottom plate is not level with the floor unless the vacuum is nearly in the upright position.  Its like there should be a spring pushing the bottom plate towards the floor.  Anyone know how to fix this ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dc35 stuck power buton - Dyson DC35 Handheld Vacuum

... Dyson DC35 Handheld Vacuum

I am looking for a contol board for a miele s143 stick vacuum. The vacuum wont start but when I supply power directly to the motor it spins. I think the switches are OK so I have concluded it is the control board Thanks Don Kenney

You should check the cord and switch's for continuity, the boards are usually pretty reliable, you could check the board for any bad solder joints, at least that would be obvious. ... Vacuums

Why is my vacuum spitting back dirt? - Hoover Platinum LiNX Cordless Stick Vacuum

... Hoover Platinum LiNX Cordless Stick Vacuum

Vacuum Problem My dirt devil vacuum is losing suction and keeps clogging. All the dirt keeps sticking to the screen by the filter and then it would stop working. Also the hose does not have a strong suction power either. So what can I do?

The Bissell can have several filters in it, depending on the model. Some have a round hepa filter that is covered with a foam sleeve. This filter is located at the bottom of the dirt cup. Others have a foam filter that is located under the dirt cup i ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Should I replace the vacuum hose or simply shorten it if a hole developed near the vacuum canister base? What are the disadvantages of this? For now I am doing duct tape, which is not so elegant as dust and things stick to the tape.

You can just shorten it as long as there is not a underlying power supply in the hose itself. after you shorten it use a "hose clamp" to hold the shorten hose in place. :) ... Kenmore 22822 Canister Vacuum

Dc35 wont charge - Dyson DC35 Handheld Vacuum

... Dyson DC35 Handheld Vacuum

Hoover linx stick vacuum is very loud

... Hoover Platinum LiNX Cordless Stick Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2723 seconds