Having problems with your EIO Estate Bagged Canister Vacuum ?

I have a eio estate vacuum. My charger for the powerhead battery is defective. I live in Winnipeg Manitoba Canada. I cannot find a eio dealer in Winnipeg. Can you direct me to my nearest dealer. Thanks Ray Kasur

Answers :

Repair Help & Product Troubleshooting for EIO Estate Bagged Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a eio estate vacuum. My charger for the powerhead battery is defective. I live in Winnipeg Manitoba Canada. I cannot find a eio dealer in Winnipeg. Can you direct me to my nearest dealer. Thanks Ray Kasur

... EIO Estate Bagged Canister Vacuum


Http://www.sharkvac.com/productDetails.aspx?ProdID=F%2bTQ%2frBpCD0%3d ... Euro-Pro S3325 Handheld Steam Vacuum

I cannot find the directions for my Utilitech 1-outlet timer. It has two numbers on the back: #148297 and #TMO1DHBL. I thought that I could just put the time now arrow on the present time and pull up the sections when I wanted the timer on; the only problem is, it lights up whenever it is plugged into the outlet. I just need the directions for setting the timing. Thank you very much Lilla

... Vacuums

Need directions I want to use my son's F6030 900 Hoover Steamvac Widepath, but he did not give me the directions. Where can I find them on the web?

This is an older model Steam Cleaner. The upper tank, fill with hot tap water up to the fill line, then add 5 ounces of carpet solution to the water using the upper cap to measure. Make sure the lower letank is secured and turn it on, tilt the handle ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


You will need to contact Honeywell at this link below and fill in the form to request a free user manual for the Honeywell 2000i Inverter Generator:\015\012\015\012 ... Vacuums

I was in the middle of using my vacuum when it quite on me. I tried multiple things including letting it cool off for a while as I was using it to vacuum my car outside and it was pretty hot. I also dismantled it according to the directions and looked for blockages and didn't find any and lastly I cleaned out the brush and put it back on. I am out of solutions. The vacuum is not that old; we have only had it for a few months. Any assistance would be appreciated. Thank You, Karen

Hi the problem you are more than likely having is with the wires that go into the vacume they are not that secure and do work loose.now if you remove the cylinder that you empty, now you see where the wire goes into the back of the vac, w ... Dyson Ball DC24 Bagless Upright Vacuum

No problem with the vacuum. Works great. However, we misplaced the various attachments (extension tube, brushes, etc.) that go with the vacuum. Can you direct me to any dealer in the Cleveland, OH area that would sell those parts. If it helps, our zip codes are 44134, 44129, and other 441__ numbers.

I just found this site when looking for parts for my EC-12TWT4. I haven't dealt with them before however...\015\012\015\012http://www.vacshopusa.com/sh ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

I was lucky enough to get a Janome 372 very cheaply at a second-hand store but it came without the manual. A friend managed to thread it so that it works but the threading is completely counter-intuitive and I'm not sure that I'll be able to remember how to do it without a threading diagram to turn to in a pinch. Unfortunately, I can't seem to find a threading diagram online anywhere! Can anyone direct me to a site that shows this?

I would look in a site called www.Pronto.com/manualsI hope this is helpful to you . ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

How do I fill my Bissell Proheat turbo 2X? can't find my directions

You can download a full instruction manual from the following Bissell site. Just choose the model and click on the Instruction Manual (PDF) link \015\012\015\012 ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Trying to find the manual to give me the directions on taking unit apart, so I can replace the belt.

Here is the manualwww.thinkvacuums.com/pdf/uprights/Dyson_DC07_Animal.pdfReplacing the belt is a simple process. Flip over the vacuum and youll see 2 clips holding the bottom. Once you do that its pretty straight foward. Consult the ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Owners Manual I will be using my Bissell shapooer 1697-W 08099C for the first time and can't find the owners manual. Can you please send me directions? Thanks much.

BISSELL User's Guides can be downloaded at www.bissell.com\012On the front page under Customer Service click on User's Guides and enter the model number of your unit.\012User Guide will be displayed as a PDF file. ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Motor started making a grinding sound and has a burn order. I found a site that sells parts such as motor assembly but I can not find a repair manual to provide disassembly instructions. It does look like this is a direct drive unit, that is no belts, at least none that a user can relace.Know of any repair manual sites? It is a Hoover F5899-900 SteamVac

... Hoover F5899-910 SteamVac Vacuum

The soap dispenser on my 2X is not dispensing. I wrote with this initial problem and received a reply. We did everything recommended to find a clog. To begin with, we poked holes thru the little holes on the underside with a toothpick. Next we took the machine all apart as directed and cleaned out anything that had accumulated (such as pet hair). Eventually we emptied out the soap dispenser, filled it with a hot salt water solution and let it sit for 10 min. I ran three tanks of hot water

Hello,The solution to your problem is already solved, since your soap dispenser is still under warrant,What i will suggest is that you contact the company that supply you this product and explain everything to them, it is most ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

My older Dyson DC14 (the purple one) early model with a clutch on the beater bar belt needs a clutch replacement. The bar has been cleaned and there are no worn or damaged parts so I conclude that the clutch at the motor end of the belt needs to be replaced. I can find the part online but no instructions on how to disassemble the vacuum to get to and replace it. Dysons only advice is to give me the address and phone of the nearest service center. Can you help me?

Have a look at www.dysonmedic.com which has some very useful info on dismantling and repairing Dysons.\015\012\015\012Although this site doesnt actually cover the DC1 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Bad Motor I have purchased two of the Kenmore direct drive beltless systems with Progressive systems. The first died after a year, the vacuum motor start making a grinding noies. I pulled the side HEPA filter and could see a fine coating of graphite like dust. Took it to a vacuum repair shop. They said the brushes were going and thus the motor was shot. I liked the vacuum and bought a second, 1 year later the motor is making a slight noise that and removing the HEPA filter I find a slight metall

That dust is from the carbon brushes on the motor. You may need to check them, and also clean out the motor compartment. A slight noise could be a motor bearing starting to go. Does the smell like rubber or electrical. If rubber, then the belt h ... Vacuums

I need to replace my concentrator nozzle and the accessory adaptor for the Shark S3325 Ultra Steam Blaster Hard surface cleaner. Are these still available? If so can you direct me to the correct site. I have not been able to find any site for this model.

... Euro-Pro S3325 Handheld Steam Vacuum

I can't seem to find the direction guide for my Hoover F6213-900 Steam Vac PowerMax TurboPOWER

It's on the Hoover website, I just looked it up.www.hoover.com F6213900Let me know if you need anything else. ... Hoover F6213-900 SteamVac Agility TurboPOWER Steam Vacuum Vacuum

I have a progressive direct drive Kenmore Model # 21637100800 and the brush does not spin. I can't find a reset button. is there one? TIA

... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Belt broke I need to find out how to get in the vacuum to replace the belt but cannot figure it out. I do not have the owners manual for this Eurka The Boss Superlit bagless (402a) please e-mail me any directions if you know how to do it,thanks. [email protected]

How do i change the belt on my eureka the boss lite vacum ... Eureka Boss SuperLite Bagless Upright Vacuum, 405AVacuum

Seems the on/off switch is not working for model#U7069-080 my upright vacuum. Can you direct me as to where I can find this part?

Your best bet is to go to a local vacuum repair shop and see if they can help you, because most internet dealers don't stock on/off switches.check your local yellow pages and call them to see if they are an authorized service center for H ... Vacuums

Kenmoore Intellivac w direct drive suddenly started making internal sound like something was stuck. Hose is clear, and sound is made when hose is detached from main unit. Vacuum sounds find at lower pressure, only makes sound with bag door closed and/or placing my hand over the end of hose.

Shut off the vac and open container and remove the bag. Try dropping a coin into the hose, then raise up to see if it falls thru to the bag area. If it does check the throat of the vac where the dirt is sucked upward to dump into the bag itself. ... Kenmore 35912 / 35913 Progressive Upright Vacuum

I can't find my directions on opening my vacuum to

Ye si can ... Kenmore Vacuums

How do you start using the F5815 Hoover Steamvac? I can not find the direction manual.

This link should helphttp://www.fixya.com/search.aspx?cstm=0&_s=F5815+Hoover+Steamvac+ManualJim ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Beater brushes not turning on the wife's Hoover Steam Vac model F5905-900. Found one prior ''solution'' stating that it sounded like the belt was bad. That was my original thought, but on checking schematics and trying to find part numbers at Sears Parts Direct and at Hoover, it does not appear the F5905-900 steam vac HAS any belts to begin with. What's next??

This one I can tell you about from personal experience with that generation Hoover Steam Vac. After using it about 7 or 8 times my brushes stopped turning also.I disassembled it (kind of like disassembling a Chinese puzzle box) and found ... Hoover F5905-900 Vacuum

I can't find the directions to my pyrex professional digital probe thermometer. Can I get printed instructions online for use tomorrow.

... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0386 seconds