Having problems with your Electrolux Central Vacuum ?


\015 HI, YOU ASKED FOR CLARIFICATION OF MY QUESTION. HERE'S THE LINK.\015\012THANKS\015\012http://www.fixya.com/support/t502857-electrolux_olympia_one_hose\015

Answers :

Usually the older hose get replaced, they just weren't made to be repaired, if it looks like something that will come off, then try either warming the sleeve up with hot water or a hair drier to see if you can work it off after it has warmed up.
Repair Help & Product Troubleshooting for Electrolux Central Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :


Usually the older hose get replaced, they just weren't made to be repaired, if it looks like something that will come off, then try either warming the sleeve up with hot water or a hair drier to see if you can work it off after it has warmed up. ... Electrolux Central Vacuum

Lost manual for emeril by t-fal bread machine model series bo1 or b01 can't really tell which number 0 or letter o.where can i find one most other products have an on line manual..i can t find one can u help me locate one..thanks

Hi - welcome to FixYa,\015\012\015\012Not easy to track these down and I can't find information relating to B01 or BO1, but I'm pretty sure this is the manual you're looking for:\015\012\015\012 ... Vacuums

Can the two inlet pipes be connected to one line? The central vacuum I have is probably from 1993/4. It has one exhaust pipe and two inlet pipes. It was initially under my stairs. I would like to move it and have in fact moved it to the garage but am now fitting the pipes. I would like to join the two pipes that were previously going to the two inlets into one pipe. Can I do it? Also would I then join the wires? Would I put a plate on the other inlet? THANKS. It is a SMART president's choice vac

There is no real reason why not...As long as you have enough "****" then that should be fine, you will need to "Y" join and NOT a "****" joint. ... Vacuums

I am looking to buy a used electrolux vacuum cleaner. I have the choice between the ultralux, the marquise, the diamond jubilee, and the olympia. Which one is the best model? Which has the best performance for the least amount of repairs?

The Ultralux is the newest of your list. The Olympia has the old type powernozzel that is rectangular. The rest have the new L shaped powernozzel and the brush is longer. As to the performance, the three newer vacuums should be the same. If the ... Electrolux UltraLux 2000 Bagged Canister Vacuum

I have no manual and the one one line has no pictures

Http://www.hoover.com/pdfs/manuals/F7425900.pdf ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

I'm a bit confused. I just purchased the Spot Bot Pet and am trying to figure out how to fill the tank. I see where the lines are for set in stains but it isn't clear to me why there are 3 lines, one for water, one for "OxyGen2" and one for "Formula".Please explain

... Bissell 1200A SpotBot Pet Robotic Vacuum

My first proheat lasted four years so I bought a new one. After I used my Pro Heat for only the fourth time my first issue occured, the gear on the pump that runs the brushes came off, so I had the one from my old proheat, I just changed the gear spindle that is screwed to the pump and fixed that problem but now it will not pump water. That is why I bought a new proheat, I could not get the old one to pump even after a new pump and made sure all lines were not cloged.

Is your new machine a 2X or like the old style proheat? ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I just bought a polti intelligent from UK but i'm staying in Malaysia. After i got my product, i realized that i'm not familiar with the product. So i called up polti agent in Malaysia but they did not want to help me out. They said if i bought from UK, the unit won't last long because some people also same like me (buy from UK because it is cheaper), but the unit only last for few months only. They said the quality is different from Malaysia one. I just wondered what they meant. Is it the polti

Why not buy another set from the local malaysian distributor to avoid any unhappiness from yourself? ... Polti Robotic Intelligent Vacuum Cleaner Steam Cleaner

My mom has alzheimers and has lost the manual to her Janome 9000 Memory Craft sewing machine. Is there anywhere on-line to get a free one? I wouldn't mind paying for one but I know hers is at her house somewhere. :(

I wasn't able to locate an actual manual for your Janome 9000 Memory Craft sewing machine. \015\012Believe me, I searched! I was able to find assistance to issues from the Janome website. Goto\015\012\015\012 ... Vacuums

We have the water hooked up at the back of machine. there is a spout for the water to come in and fill the ice tray.but is does not. If we turn the water on it fills up the space under the ice basket. I keep getting red light and then the two smal llight one ice and one water come on. We can hear the motor trying to fill the ice try and then lights come on. Please help me this so I can use this product. It did not come with a manual.

The water inlet valve on the back of unit opens when the ice maker needs water. If the valve doesn't seal good because of sediment or wear it will continue to drip and when the water reaches the ice maker supply tube it will freeze blocking the fill ... Vacuums

I have White Speedylock Serger, model 1500 that will not work when I press the foot pedal. I thought it might be the pedal, so I ordered one on-line, but the new one does not make it work either. I have checked the needle and it is fine, not loose or broken. The presser foot is fine also.

If either of the foot pedals are for sale I am interested. [email protected] ... Vacuums

I have a Palm Springs Ice Maker Model JS-ZBJ-10, and the Power Indicator Light blinks and tray does not fill up. I have had the water line clogged at one time and blew out the clogged line, but this is not the problem this time as I cleaned it and the light still blinks.

... Vacuums

Owner/user manual Before my sister died she gave me the little grren machine model 1425 turbo brush with heat. That is all I know about it as she did not find the manual and now no one knows where it is and I really want to get it working and learn about it, as I know she loved it. so I really need a manual. thank any one that can tell me if it is on line or something.

Http://www.bissell.com/images/UserGuides/1400_206.pdf ... Bissell 1425 Little Green ProHeat Handheld Steam Vacuum

I just received my Hepa filter in the mail today. Product #XSH621 - Hepa filter for EP619 & EP621 :005-04 When bought my vacumn, I was told that the filters were free and all I do is pay Postage. Today I received one filter and it lookes like I got charged the postage for two filters. The packages slips: One stated order #11152282 The other order # 1151940 If I get charged for two I expect to receive two. Can you help me with this matter or where can I go to get resolution. Catherine Fantini e-

This isn't really a problem that can be fixed here on Fixya rather than advise you as a buyer. You'd have to contact the people/company you have purchased the filters from and take it up with them regarding the postage. Hope you get a decent reply. ... Euro-Pro Vacuums

I recently took out a stand mixer that is probably over 50 years old. It belonged to my mother and I wanted to use it. It probably hasn't been used in at least 10 years. With some effort, I removed one of the beaters but cannot remove the other one nor can I even budge it. I have used WD-40 but it's not helping. It's a Westinghouse product. Any ideas? Thanks.

If you used WD40, you should have the unit inverted so the WD40 runs down into the beater socket.Use a small piece of wood and place it against the bottom of the beater and tap lightly with a hammer while pressing the beater release button/lever, jus ... Vacuums

My Necchi supernova ultra mark 2 (50 year old) sewing machine's belt broke (13 inch length). I'm having trouble finding one on-line. Any idea where to get one?

I have the same machine and I see the belt has been replaced. It's a Singer belt. You might wanna try that. ... Vacuums

Disassemble electrolux olympia one vacuum.

Before taking the machine apart, always check for clogs in the hose and power nozzle, full bag, and/or plugged hole under the bag. Suction/vacuum loss can also be caused by leaky or cracked hose, including the section in the power nozzle.<br /> ... Electrolux Vacuums


Usually the older hose get replaced, they just weren't made to be repaired, if it looks like something that will come off, then try either warming the sleeve up with hot water or a hair drier to see if you can work it off after it has warmed up. ... Vacuums

Kirby Sentria Shampooer is not foaming the width of the tray. It is only coming out on one line and is saturating the carpet with water in that area. What is the problem? What do I do? We just bought this 5 mos. ago. Please help.

Your shampooer is not broken. (sorry Fanny)\015\012\015\012You are missing a wee screen that fits on the hole where the little hose plugs into the tank. Check inside the hose end or down inside your shampooer box. Here's a link to my onli ... Kirby Ultimate G Bagged Upright Vacuum

Lost Manual I have a Hoover spin scrub carpet cleaner and have lost the direction on how to use it. Is there a place to go to on line where I can down load a users manua l or can you possibly e-mail me one? Thank You, Karen [email protected]

Go to www.hoover.com and scroll down to service and support on the left side of the page. You can load manuals from there, just have your model number ready. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Oreck XL Is there any chance you could e-mail me the wiring diagram for the Oreck XL? I just can't read the one that's on-line. Thanks, [email protected]

I would advise you to ALWAYS to FIRST UNPLUG THEIR VACUUM before beginning any service procedure. The motor has 5 wires to the motor as stated in the Oreck owners manual, tow are for the headlights, one is a ground wire, and the other two are f ... Oreck XL Ultra Bagged Upright Vacuum

I have lost the owners manual to my Smart Choice vaccuum CPU-2 and would like to find one.

You should be able to download a manual off the manufacturers web site. ... Vacuums

I need a new bar brush? (beater brush, what ever you call it) Where can I purchase one or can I purchase online. Please send me a e-mail address if I can order on line.

If it is available you would be able to get it from a local Eureka/Electrolux Factory warranty center. Locate one by using eureekas dealer locator. The euro-pro roller would be a special order part. Be sure to take the machine in, they may be abl ... Euro-Pro NV31 Infinity Vacuum

Mouse chewed instructions for Bissell Powerfifter Deep Cleaning System, Model number 16603--help! Am especially concerned about amount of water to add to tank to shampoo, and to clean tank. This product has been discontinued, but the Powerbrush is the closest one listed. Thanks...

Take this link to Bissell website and click on "user guide" for a printable user manual.\015\012\015\012http://www.bissell.com/Product_Sea ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Hoover Bagless Hello,      My Hoover bag less (Model U5280-900) is not picking up dirt like it should.  The brush roll is spinning fine, but the bristles on it are only about one quarter inch long.  I am wondering how long they should be.  The vacuum is quite a few years old.  Do you think it is time to replace the brush roll.  Could you email me at [email protected] about this topic.  The product bar below did not contain my model no.  The correct model no. is above in my message.  Thanks

If the belt is more than six months old then change it even if it is not broken. then replace your filters if that doesnt work than check the hoses for a clog drop a marble down them and make sure it comes out. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0372 seconds