Having problems with your Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum ?

Oxygen 3 Ultra powerhead replacement parts?

\015 Hello, \302\240I own an Oxygen 3 Ultra that has had some hair caught around the belted end of the roller brush. \302\240I cleared the hair out just fine and it happened again but this time the hair wrapped around the black nylon roller retainer (for lack of its proper name). \302\240This eventually melted due to friction and the brush no longer runs as the retainer no longer has the guide that holds it in place.\015\012\015\012The repair to get this working again is minor but I can not locate the parts. \302\240While I can find replacement roller brushes and entire EL5 housing I can't find replacement retainers. \302\240Where is there a good source for such parts? \302\240Is there a junk yard of Oxygen 3 Ultra's somewhere to pick through? \302\240Thank you.\015

Answers :

You have to buy a new roller
Repair Help & Product Troubleshooting for Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Oxygen 3 Ultra powerhead replacement parts?


You have to buy a new roller ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

I need a replacement part for the S3325 Shark ultra steam blaster hard surface cleaner: part #22, Accessory Adapter, on page 3 of the owners manual. Euro Pro shipped me a totally wrong part. Can you help me find this adapter? Thank you.


... Euro-Pro S3325 Handheld Steam Vacuum

Eureka oxygen 6994A floor tool Part # 61264 is discontinued. What replacement part will fit?


... Vacuums

I have an Electrolux Oxygen EL6988D. The wand release assembly cracked; i have a replacement but how do I attach the replacement part?


... Electrolux Vacuums

Replacement parts where can i find replacement steam pocket towels online for the shark ultra steam blaster hard surface cleaner? I went online to www.sharkcompany.com & www.sharkvac.com and when I enter my model number S3325 search comes back with 0. Thanks


You can found them on amazon, take a look here: Amazon com Euro Pro S3325. I hope this was helpful. Cheers ... Euro-Pro S3325 Handheld Steam Vacuum

My powerhead on my EXL Tri-Star goes on then shuts off. When youturn it upside downit runs, then back on the floor it stops. Is it the belt inside the powerhead and if so to I take the head apart and replace this belt. Can any vacuum repair place fix this if I have the part. Vacuum was purchased in March 2000 Thank you, Dianne Miller [email protected]


A vac shop is probably going to require you to use their parts for warranty purposes. but its pretty simple. most shops should be capable to do it. ... Vacuums

I need to replace a part for Electrolux Oxygen model EL7001.


... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

I am trying to get replacement parts for the shark ultra steamer, cannot find anywhere. Can anyone please help. Thank you


You can start with this URL\015\012\015\012http://www.vacsewcenter.com/browser.asp?AdvSearch=Shark&gclid=CKrXi5bEyaQCFQf3iAodyVcpEw\015\012\015\012Paul ... Euro-Pro Shark SC-505 Handheld Steam Vacuum

Where is Electrolux Oxygen 3 Ultra el7024 powerhead reset button


... Electrolux EL7024A Oxygen3 Bagged Canister Vacuum

Replacement parts for ultra steam shark ep903


... Kenmore Euro-Pro Ultra Steam Shark II Hard Surface Cleaner EP908 Vacuum

Electrolux Oxygen 3 Ultra el7024 powerhead no power


... Electrolux EL7024A Oxygen3 Bagged Canister Vacuum

Trying to get replacement parts for Shark Ultra steam Blaster S33


Http://www.sharkvac.com/productDetails.aspx?ProdID=F%2bTQ%2frBpCD0%3d ... Euro-Pro S3325 Handheld Steam Vacuum

I have a Electrolux Oxygen model 6996 A. The power head and the dog hair hand tool no longer spin. What wouod cause this and what part would I need to replace if necessary. I have owned this for 6 years (7 kids, 2 dogs) and it is an amazaing vacuum! Thank you. Susan


... Eureka Oxygen 6996 Bagged Canister Vacuum

Dyson dc20 powerhead intermittent rotation - Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum


... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

I have a Kenmore Progressive model 116.22812204 purchased 2003. The swivel (part nuumber 8195133) that attaches the extension wand to the power mate attachment snapped, so I can't keep the parts connected. I can order a replacement part on-line, but I don't know how to replace it - is it difficult to take apart the power-mate and replace this part? Do you have instructions on how to do it? Thanks!


... Kenmore Vacuums

Need to know if a replacement part can be purchased and where


IT CAN BE FIXED BUT YOU NEED TO KNOW THE ROPES \015\012I HAVE THE KNOWHOW AND THE PARTS \015\012PRICE IS 40$ + YOU PAY ONE WAY SHIPPING \015\012RETURN IN 1 WEEK \015\012EMAIL ... Kenmore 22812 Bagged Canister Vacuum

Parts replacement We have a Hoover Steam Vac that has a broken part #10 in your picture or Part # 37271035. Does this part cover the whole top section of the Vac? Is it hard to replace? Where can you get the best prices on Hoover parts? I have been on Hoovers website and they don't even recognize this Steam Vac. which is hard to believe they don't even recognize their own unit? Thanks Ray


This the hood or top cover. There some screws on the bottom as well as on the top, then it comes off. ... Vacuums

Can i replace s-bag holder in my electrolux oxygen 3 vaccum?


Have you tried www.vacuumworld.co.uk ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

Replacement parts I lost the tip and tools in a move and now can not find anything about the product and where to get replacement parts. Any help locating a parts supplier would be greatly appreciated.


... Saeco Supervapore 2500 Steam Vacuum

My older Dyson DC14 (the purple one) early model with a clutch on the beater bar belt needs a clutch replacement. The bar has been cleaned and there are no worn or damaged parts so I conclude that the clutch at the motor end of the belt needs to be replaced. I can find the part online but no instructions on how to disassemble the vacuum to get to and replace it. Dysons only advice is to give me the address and phone of the nearest service center. Can you help me?


Have a look at www.dysonmedic.com which has some very useful info on dismantling and repairing Dysons.\015\012\015\012Although this site doesnt actually cover the DC1 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

We are unable to find a replacement part that the filter attaches to in the dirt cup on our Eureka Boss Pro Model 411. This part seals the top of the dirt cup and holds the filter in place. What is the part name or model number for the replacement?


I just called Eureka (1-800-282-2886) and asked for the dust cover lid. It was part number 61538-1. They said they could ship it to me or I could call one of the authorized service centers nearby to see if they had one. I wasn't in a hurry and the ... Eureka 411A Upright Vacuum

Hi, I have a Kenmore Whispertone canister vacuum that I purchased in 2007. The model # is 116.22271503C, which seems to confuse the parts people. I need to buy a new powerhead & a few months ago was given a price of $75, but now Sears Canada tells me the part # is 20 116KC5OXBZRZUO1 described as Power Mate Assembly for $192.99. I thought the Power Mate was the small powerhead for stairs, upholstery, etc. Have they located the wrong part for me, or is this really what it costs?? Thanks in advance


Yes, powerheads are quite expensive. That sounds about right.\015\012You can check Ebay for better prices, but check the shipping rates before ordering. ... Kenmore Whispertone 23312 Bagged Canister Vacuum

Need replacement parts and can't find them


Go to geyser vacuum center.com he has hard to find parts .i'm sure he can help you ... Eureka 6983 Bagged Canister Vacuum

I have a dyson dc07 with a malfuncitoning clutch diagnosed here on fixya. I've replaced the clutch and the grinding noise when the clutch is engaged for carpet and non rotating brush problem presists. This is after replacement of the clutch with a new part. Install of the new part went well and there are no otehr apparent problems with the unit. Ideas? The unit is only a couple years old and not used that much on carpet. For an expensive vacuum I'm not that impressed with it at this point.


Greetings from GoVacuum,\015\012\015\012If you have replaced the clutch already, then this can really only be one other problem, and that is the roller brush. If the roller brush's bearing have locked up, and the brush is no longer spinn ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have a riccar 500 upright and the axel broke in half. The repair shop says it cannot be repaired without replacing the part. WHere can I get the replacement part?


The repair shop should have all the parts needed. However, sometimes the manufacturer stops making some parts. If this is the case, you may need to try to find one at a thrift store or garage sale and cannibalize it. ... Riccar 8955 Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0495 seconds