Having problems with your Electrolux EL7055A Bagless Canister Vacuum ?

Cord rewinder on a Electrolux model C102J vacum cleaner

\015 I have a Electrolux C102J vacum cleaner. The cord was pulled out to far and the cord won't rewind. I have the back off but it looks like I have to take the unit apart to get the rewinder out. Where are the push points to get the unit apart? Or can I fix the rewinder in the unit? The cord was pulled out to far and won't rewind. Is there something that I can just push to unlock the rewinder? Is it an easy task or is this something I should be taking to a repair service center?\015\012Johnd\015

Answers :

Hi there Johnd, SmartAlec from Nelsonvacuums.com.au here. I fix vacuums full time for a living and the first time i had this problem with the australian version of this vacuum it tok me an hour to pull it apart and back together. now i have done a dozen or so it is about a 30minute operation. I dont know what you rate your technical skill level at but i give this machine a 8/10 for hardness. It is most likely that the cord has jumped off the reel and is wedged so it shouldn't require parts but it cant be done without nearly stripping it down. There is no reset or similar for the reel. My advice unless your very confident take it to a repairer. It would be 1/2 - 1hr of labour charge only i would think.
\015\012Hope this helps.
Repair Help & Product Troubleshooting for Electrolux EL7055A Bagless Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cord rewinder on a Electrolux model C102J vacum cleaner

Hi there Johnd, SmartAlec from Nelsonvacuums.com.au here. I fix vacuums full time for a living and the first time i had this problem with the australian version of this vac ... Electrolux EL7055A Bagless Canister Vacuum

The cord rewind button for my electrolux vacuum cleaner is stuck so it always rewind the cord. how to fix it?

... Electrolux Vacuums

How do I repair the cord rewinder on an electrolux model #1677?

... Vacuums

Electrolux Vacuum cleaner model z5830t retractable power cord replacement instructions

... Vacuums

I have a shark vacum cleaner model sv736k 15.6v handheld and the charger cord shorted and corroded the contact. I need a replacement charger ka12d240015033u where / how can i get one?

... Vacuums

Need to replace cord rewinder on electrolux tank vacuum cleaner. How does the canister come apart?

If it's the older style open front and the two rubber strips on each side slide out. this should help you along. ... Vacuums

Hello i have a shark vacum cleaner model sv736k 15.6v handheld and the charger cord melted charger ka12d240015033u where / how can i get a replacement phil [email protected] kind regards

... Vacuums


Hi,\015\012\015\012I will try to find a service manual for you. ... Vacuums

For Hoover canister cleaner model S1361, the power cord got stuck inside and cannot be pulled out or rewind, need help. What can we do? We live in Springfield Drive, Richmond BC V7E 1Z1. Thank You!

... Vacuums

Have an older model Electrolux canister model. The electric plug is broken so I got a new plug to put on. When I cut the cord to replace the plug, the dang cord retracted into the unit. So how do I get access to the cord area so i can find the end to the cord!

Hi,\012\012You have to open the vacuum cleaner and look for the wire.\012\012It is located inside the circular wheel, where it wind itself up.\012\012Don't be afraid to open it, unless your willing to pay somebody just to install a ... Electrolux Vacuums

Electrolux Model E Vacuum Cleaner switch

Connect the red wire to swith ... Electrolux UltraLux 2000 Bagged Canister Vacuum

The cord on my electrolux Epic 6500 has been pulled too far out and will not rewind. How can I access the cord reel to rewind?

There are two keys holding the body together, underneath the bumpers on the side of the vac. With the bag door open these keys when gripped with pliers will slide forward to release the body panels. Before opening the vac, gently push the ... Electrolux Epic 6500 Vacuum

Electrolux model Z5830T cord replacement instructions

... Vacuums

Hi , I have replaced the electric cord on Electrolux Lux Royal vacuum , but the rewind that retracts the cord does not pull it in . The coil spring looks ok but it will not pull the cord back in , any suggestions please . Thanks Dave Ryder

Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=564353\015\012Generic problem for all Vacuums\015\012Hi, I have replaced\015\012Posted by dryder on May 02, 2008 ... Vacuums

Shark Europro Model 1250 vacuum cleaner cord won't retract

... Vacuums

I have a Electrolux vacua, cleaner, model L.E.

... Electrolux Vacuums

I have a Model E Electrolux vacuum cleaner. Could

The model E vac was made from 1954 to 1956. The worth depends on what the vac looks like and how it runs. Maybe between $50.00 to $100.00. ... Electrolux UltraLux 2000 Bagged Canister Vacuum

How do i change the belt on my electrolux powerglide vacum cleaner

... Vacuums

Cable not rewinding on Miele vacuum cleaner model s256i

... Miele S251i Plus Bagged Canister Vacuum

Electrolux 720 Vacuum cleaner needs new cord retraction, spring cord & latch

... Electrolux Vacuums

We bought a new cord winder for our Electrolux 1205 Canister Vacuum cleaner and we are trying to install it is not turning on. We get it all connected but it doesn't turn on. Is there a reset button or some advise you can give me to get it working? I used a voltage detector to see if there was power running through the cord winder and there is.

Did you put a bag in the vacuum?\015\012I suspect there's an improper wire connection somewhere, but there are other things that could cause this I strongly recommend taking it to an authorized Aerus Electrolux dealer and letting a trained tec ... Electrolux Vacuums

Kenmore vacum cleaner model 11628615801 has power but vacum motor doesn't work

... Vacuums

I'm trying to replace the power cord on my Hoover Telios vacuum cleaner. I have the machine open on the floor, but can't work out how to find the terminals on the cord rewind reel - they seem

... Hoover Telios Canister Vac Vacuum

Electrolux 5500 The cord on my vacuum cleaner won't retrack. What is the trick to get the back end off the vacuum cleaner? It looks like it was pulled out too far.

Depends on which model you have, but most of them you take off the center section, then you cab get to the 2 screws on top , and there is a screw on the bottom, then the back end will pull off. But I wouldn't try taking the cord reel apart, if that ... Electrolux Lux 5500 Canister Vacuum

Miele white star vacum cleaner - electrical cord not making contact when plugged in - sometimes 'jiggling' cord at base, it will make contact and work...pls help..where can i get it repaired in nyc, or can i repair it myself

... Miele Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0695 seconds