Having problems with your Electrolux Epic 6500 Vacuum ?

Says the bag is full when it's not - Electrolux Epic 6500 Vacuum

Answers :

First try turning dial on top of the machine so the arrow lines up with the smallest dot.
The most likely problem is clogged, worn, or broken control valve assembly (CVA). It could also be clogged tubes to the CVA. This is usually caused by using "made to fit" bags rather than the genuine bags made by Home Solutions. The vacuum would need to be taken to an authorized Aerus Electrolux store for repair/replacement. Generally, if this is the problem, the interior of the vacuum, including the motor, needs cleaned as well.
Some other simple things you can check are:
Dirty afterfilter. This is located on the exhaust hole on the back of the vacuum. To access, press in on tab at back of the exhaust cover, lift cover from the back, and remove filter. If the filter is dark, it is clogged with dust particles and needs replaced. Turn vacuum on and run it for awhile. If it continues to run, this is the problem.
Another potential cause is a clogged hose. Disconnect hose at both ends. Drop a coin down one end and lift that end to allow coin to drop through the other end. If it does, fine. If not, connect hose to the exhaust port, place other end into a large garbage bag, or into the in port of the vacuum, and turn on. This almost always clears the hose.
Check the elbow of the power nozzle where the hose connects. Drop a coin through here to check for clogs. If there is one, it can generally be cleared by pushing it toward the brush with a wooden spoon handle, or similar blunt object.
For nearest store, follow instructions at below link.
Repair Help & Product Troubleshooting for Electrolux Epic 6500 Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Says the bag is full when it's not - Electrolux Epic 6500 Vacuum

First try turning dial on top of the machine so the arrow lines up with the smallest dot.The most likely problem is clogged, worn, or broken control valve assembly (CVA). It could also be clogged tubes to the CVA. This is usually caused b ... Electrolux Epic 6500 Vacuum

Vacuum keeps saying bag is full and cuts 0ff - Electrolux Harmony Canister Vacuum - EL6985 Vacuum

... Electrolux Harmony Canister Vacuum - EL6985 Vacuum

Electrolux Epic 6500SR Full Bag sensor working, Does not Reset properly

The problem was a sticking switch that was not being reset. The vacuum on/off switch mechanism is comprised of two switches. One is the main switch that turns the vacuum on and off. The second is a shut off switch that gets tripped when the full b ... Electrolux Epic 6500 Vacuum

Electrolux epic series 6000 sr model canister...we put a new bag in machine but it wont turn on and the light is on saying the bag is full and needs to be replaced...we tried the on-off switch several times but it wont turn on...why?

... Electrolux Vacuums

Bag full vacuum shut off. Is there a reset - Electrolux Epic 6500 Vacuum

You didn't mention the model, but with several Electrolux canister models, I'd say there's probably a problem with the control valve assembly inside the canister. This would need to be repaired at an authorized Aerus Electrolux store. If unsure whe ... Electrolux Epic 6500 Vacuum

Hi there, I have an excellent Electrolux (but older) Diplomat LX model which stops when the bag is supposedly full. It''s not full however, but merely 1/4 to 1/3 full. I'd like to reduce the "sensitivity" of the sensor or turn it off altogether. I don't run my vacuum with a full bag, but there's a limit. Please tell me how to address this problem. Thanks very much. Pierre

... Electrolux Vacuums

My electrolux epic series 6000 sr vacuum is not working. I was vacuuming when it shut off and the bag light came on. After changing the bag I tried turning it on and the question mark light comes on instead of the vacuum. What does this mean? How can I fix this?

... Vacuums

Full bag light on when bag is new - Electrolux Lux 7000 Bagged Canister Vacuum

Check for secondary filter, if it is clogged could cause bag light to come on as suction is dropping due to filter, not bag. ... Electrolux Lux 7000 Bagged Canister Vacuum

Hoover uh30010 The vacuum will not turn on. A message lights saying the bag is full, change the bag. I have changed the bag and it still won't turn on.

... Hoover Platinum Collection Upright Vacuum

Electrolux model C104H says that the bag is full when it is

... Electrolux Vacuums

My vacuum does not suction floor debri the canister says change bag, i changed it 2 times with recommended electrolux bags. It will suctionwith wand and brush but not with power head

\015\012The power head has a separate motor to drive powerful carpet cleaning.Check if that motor is getting blocked or if its running slow/weak.Also check from any blockage in vacuum line.\015\012Keep updated with the results.\015\012Than ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

I have a nearly 9 year old Electrolux Excellio Z5228 vacuum cleaner. It has recently started cutting out during operation. I cleaned the micro filter (between bag & motor) via brush & hitting against wall & seems / looks quite clean. I washed the gore filter (output from motor to clean the exhaust air) as per instructions, then let to dry. It was very clogged but now very clean. The vacuum clearner still cuts out often. Even after a long rest (say overnight) it still won't start, then ano

... Electrolux Vacuums

I have a Lux Commercial Electrolux vacuum sweeper-Model U129Q. The red light that indicates a full bag stay on even after changing the bag.

... Electrolux Vacuums

Our Electrolux Epic Series 6500 SR reads the bag is full and shuts down even though the bag was just changed

This is most probably due to a worn out or clogged Control Valve Assembly.\015\012Detach the hose and see if it runs. If it does, place hand over hole. If it shuts off, CVA is probably the cause. A clogged CVA is generally due to using gener ... Vacuums

My vacuum says the bag is full but its not - Panasonic Vacuums

This time of year there is alot of fine dust. The dust gets into your bag pores and impedes the air flow. The auto shut of is regulated by air flow. Try putting in a new bag then **** in a couple pieces of kleenex in . This will help protect the bag ... Panasonic Vacuums

What kind of bag for the epic series 3500 sr - Electrolux Epic 3500 Vacuum

"U" (upright) style bags, available at any Aerus Electrolux store, or from their consultants. These are the genuine bags made only by Home Solutions. Generic bags WILL decrease the lifespan of the motor.\015\012\015\012Contact your loca ... Electrolux Epic 3500 Vacuum

My almost brand new AEG Electrolux Ultraone vacuum cleaner has started making whining noise. Bag is not full. Any suggestions?

... Electrolux Vacuums

What size/model bags do I need for my Electrolux Epic 6500 SR vacuum?

Style C Electrolux canister bags. ... Electrolux Epic 6500 Vacuum

Does not turn on epic 6000 - Electrolux C101 Bagged Canister Vacuum

First, turn dial on top of vacuum counter-clockwise so the smallest dot lines up with the arrow. See if it stays on. If not, detach hose and turn vacuum on. Place palm of hand over intake. If it turns off, it's possible that the tubes connecting to t ... Electrolux C101 Bagged Canister Vacuum

Just given what looks like a brand new Electrolux Epic 6500 series canister vacuum. I have plugged it in, there is a bag but it won't turn on. Is there something I have missed??

The Epic 6500 was actually manufactured in 1992 so in no way can be considered brand new. \015\012First, make sure the plug symbol beside the dial is lit. This indicates the vacuum is getting power. If it doesn't light, there's a problem wit ... Electrolux Vacuums

I have a Z345 Electrolux cylinder vacuum cleaner, from the 1970s probably, but not used much. I have lost the guide. I forgot to change the bag before it was full. Smoke started to come out - smelling of burnt paper, not rubber. So switched off. It did not blow the fuse, and may be OK. I wish to inspect it. How do I open it up? Alos I have an air filter and a motor filter for it. I have often changed the air filter on the top. How do I get at the motor filter, if there is one? Than

Good day! OK you have to is replaced the bag and that's it.And don't forget to change the bag again to avoid that problem.Thank you ... Electrolux Guardian Bagged Canister Vacuum

Electrolux 5000 light is on where it normally says chande out bag. vacuum still will not run with hose on. with hose off works fine.

Clear solution here - the hose is blocked.\015\012\015\012\015\012\015\012Using a blunt stick with blunt ends, remove the entire hose assembly and compact up with the stick. Wriggle the stick a couple of times and this should dislodge whatever ... Electrolux Lux 5500 Canister Vacuum

Vacuum bag is always says it's full even when is new

You very likely have a defctive control valve under the dial on top of the vac , or a kink or blockage in the tiny pressure hose that feeds the air from the throat of the vac or the back of the bag chamber against the two sides of the rubber diaphra ... Electrolux UltraLux 2000 Bagged Canister Vacuum

Bag full light stays on so my electrolux diplomat lx vacuum wont start i push on/off swtch and light stays on

... Electrolux Lux 5500 Canister Vacuum

My windsor s12 vacuum light says the bag is full but it is new?

My windsor s12 model does turn on and off does not stay runing electrical wire cord has been replace tell me what to do? ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2564 seconds