Having problems with your Electrolux Guardian Bagged Canister Vacuum ?

Canister starts, but vacuum does not start

\015 Electrolux Gaurdian, cannot get power to the vacuum itself; cannister is fine and whirring away. Have tried to reset, clear suction, and made sure wheel can spin. Any thoughts?\015\012\015\012\011\011\015

Answers :

Take the hose unpluged see vaccum is working or not.
\015\012IF NOT.
  2. \015\012
  4. \015\012
Repair Help & Product Troubleshooting for Electrolux Guardian Bagged Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The breaker on the vacuum trips after about 3 seconds on. The canister was extremely full and started to smell like burnt wood, we fully cleaned out the unit. Now when the vacuum is turned on, the motor sounds weak, and then turns off in a matter of seconds,and we have to reset the breaker on the vacuum to get it to start again for another few seconds.

This sounds indicative of a worn set of carbon brushes on a dieing motor for a central vac. the armature is ,likely damaged causing teh breaker to blow. Please post back with more details as to make and model. Do not atempt to run the vac ... Vacuums

I have a Dyson DC23 animal canister. This is the first time I emptied the canister. After putting it back on, the vacuum won't start. I have removed and reseated the canister several times, also attachments, but it will not start. Help!

... Dyson DC23ACTUSC Bagless Canister Cyclonic Vacuum

I have an Ecectrolux Epic canister vacuum. As soon as it starts sucking, the vacuum cuts off. I put a new filter and bag in, but it doesn't seem to help. If I open the front where the bag goes, take the bag out and depress the safety button the vacuum will run. Need some help or direction. Thank you

Try this.\015\012Disconnect hose. Turn machine on and place hand over intake. If it shuts off immediately, first try turning dial on top of machine so largest dot matches up with arrow. Turn on and place hand over intake again. If it still ... Electrolux Vacuums

My electrolux oxygen canister cuts on and off. I have to open and close the vacuum, or take the base of the hose off and then re-insert. I have to do all these things before it will start up again. I sometimes shake the hose around, then it will come back on. If I try to dust with the dust brush (like a lamp shade or shelf) and the suction pulls against the object, the vacuum goes off for awhile. Sometimes I'll have to reset the vacuum by unplugging the electric cord. I never get to finis

Maybe you should have taken it back to that shop, it appartently isn't fixed. I would have replace that board, don't believe in modifing, you usually end up with other problems, like you have. One thing to check is maybe you have a partial clog in ... Vacuums

I was given a Kenmore progressive hepa filter 22313 Bagged Canister Vacuum recently, but don't have the manual. We used it once to vacuum the house and it worked beautifully. Then we used it 5-6 days later and it started whining and getting hot. What year was this vacuum manufactured? Where can I download an owners manual?? Help!

Http://www.managemylife.com/mmh/owner_manuals/5461/KENMORE-Vacuum-Canister-L0809572 ... Kenmore 22313 Bagged Canister Vacuum

Canister starts, but vacuum does not start

Take the hose unpluged see vaccum is working or not. \015\012IF NOT.\015\012\015\012BAG FULL\015\012HOSE CLOGGED\015\012BELT BROKEN/LOOSEN ... Electrolux Guardian Bagged Canister Vacuum

My Kenmore Tru Hepa Canister vacuum won't start... the Powerhead turns on but not the canister. Help Please!

... Kenmore 25512/ 25513 Progressive Canister Vacuum

Dyson wont start - Dyson "Stowaway" Canister Vacuum Vacuum

... Dyson "Stowaway" Canister Vacuum Vacuum

I have a VAX U91-MA-B-I vacuum. All filters are clean. When I start it a valve in the upper part of the canister (near the handle) opens and the vacuum makes a very loud noise and does not create the cyclone in the chamber.

... VAX Appliances Vacuums

Kenmore canister vacuum cleaner won't start

Hello, The rigidity of the Power Head/Handle is quite durable, :) but sometimes they give out. Have SEARS ...loL, sears, have Sears have a look at the head. :) ... Kenmore Vacuums

Kenmore Canister vacuum won't start

Test the cord ... Vacuums

25512/ 25513 Progressive Canister Vacuum: HI, we have a kenmore progressive canister vacuum ...

Cord bad at male prongs, or fuse near motor blown. ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Canister vacuum keeps turning off, can push buttons on wand handle to restart but shuts off again as soon as you start to move handle

Its sounds like the problem is either the power head wire which when your using it and twisting it left and right, turns it off.. Or it could be in the hose where the connect meets with the unit.Here's a number to call to further assist y ... Miele S548 Bagged Canister Vacuum

My kenmore progressive canister vacuum won't start,any ideas, is there a fuse? it was on then just quit. I've checked all connections and made sure they are snug, and that it's still plugged in (!) model 116.

Wire broken in several place along suction tubing. Replaced tubing and works fine ... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

DC05 Refuses to start - Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

Pull cord assy is very common on these ....... have it checked over/.....01179512835 ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

Vacume starts and then immediately stops - Electrolux Guardian Bagged Canister Vacuum

... Electrolux Guardian Bagged Canister Vacuum

The motor running the beater bar on ny Electrolux canister vacuum cleaner runs intermittently. It runs about 2 minutes and then cuts off and automatically starts again after a 1 to 2 minute interval. I have tried taking it apart and removing the dust and grit in the beater bar attachment but with no change in operation. What would you suggest?

Check all the wiring connections to make sure they're tight. \015\0121/2. Wiring to power nozzle motor or reset switch is loose.\015\0121. Cord from power nozzle to upper wand. If the plastic portion of the wand is cracked near the co ... Electrolux UltraLux 2000 Bagged Canister Vacuum

While vacuuming air started flowing out of a hole on the right side of the machine directly below the canister that catches dirt. And the engine became hot to the touch. We have only had the unit for 3 months and no one in Austin Tx works on this model so any help would be appreciated.

... Shark Navigator Bagless Upright Vacuum

The vacuum shuts off by itself and then sometimes takes a while to start again after several attempts, progressive canister type 25914507

Sounds like your motor is cutting out from a thermal fuse. this means that when it overheats it will turn off and then will reset, allowing you to operate the vac. The problem could be a result of poor air flow...check the filiters and hose path for ... Vacuums

I have a Kenmore 116.36932 (upright-bagless vacuum) that the motor protector by-pass valve has opened. I've clean out the area between the agitator brush where the flexible extension hose starts. There was some blockage there. I checked the rest of the system (extenstion hose, back filter area, pipe area to canister and area to side filter. I took the 2 filters out and the by-pass valve is still open. Where else could there be a blockage that I can take apart to clean and put back together

... Vacuums

Power Head keeps cutting in and out while vacuuming???Canister motor keeps running but the power head starts and stops like there is a short or some loss of connection somewhere. Any ideas?

My kenmore progressive vacuum had the same problem. The electrical terminal at the bottom of the wand was corroded. I used a flat head screw driver to scrape the female portion of the connector as best as I could. I then took off the plastic cover on ... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

My old model electrolux vacuum canister model AP 280 (brown and light beige)always starts and then stops again everytime.

Please stop sending your Premium Assistance Plan. I am not a potential client and these emails are just a margeting scam to sign up new clients. I believe in free exchange of information and solutions for our broken appliances. If I wanted to pay ... Electrolux Vacuums

Dyson does not start? - Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

Check fuse in plugcheck foot switch clicks when pressedcheck cable for damageif non above replace motor ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

My Kenmore Progressive canister vacuum cleaner no. 116 20712008 will ot start. I plugged it in different outlets with not success. What I sould do? Adam

Check fuse ... Vacuums

How do I open the hose handle assembly of a kenmore whispertone 4.5 canister vacuum? It seems to start at the sleeve where the flex hose meets the handle, but I'm afraid of breaking it by forcing it.

... Kenmore 23313 Whispertone Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0793 seconds