Having problems with your Electrolux Harmony Canister Vacuum - EL6985 Vacuum ?

Cover won't close

\015 I've had an Electrolux Harmony for 2 years. The last time I changed bags, the cover wouldn't close. Nothing looks broken or stuck. What should I do?\015

Answers :

Try removing the bag and closing the cover. Unless that piece that holds the bag has gotten loose, there isn't anything that should prevent that cover from shutting, so it may just be the way the bag is sitting.
Repair Help & Product Troubleshooting for Electrolux Harmony Canister Vacuum - EL6985 Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Windsor Sensor XP12 says the bag is full when it's not. I have removed the hose, brush, and filter and cleaned everything. I can put a bag on without the cover and it works great. However, when I add the bag to the front cover and close the latch the right way, it does not work. I'm thinking that the cover is not seating the bag correctly over the hole, but I can't figure out how to fix it. Any suggestions?


... Windsor SR12 Sensor Bagged Upright Vacuum

My Kenmore Progressive Vacum canister wont turn on how do I remove the cover to check the fuse without breaking the cover?


... Kenmore Vacuums

My machine wont pick up the dirty water. If I take the cover off the recovery tank there is a lot of suction but it wont **** up the water. my carpet is soaked. What can I do


At power head clean out area before power head also look for small hose and clean out and look at rollers,i hope this works if you have directions still they should be able to help you out some more.thanks ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Green canister lid wont close


Http://smallappliances.electroluxusa.com/en-US/Customer-Support/download free your instr manual and see your problem lid why not close, ... Electrolux Ultrasilencer Green Canister Vacuum

Cover won't close


Try removing the bag and closing the cover. Unless that piece that holds the bag has gotten loose, there isn't anything that should prevent that cover from shutting, so it may just be the way the bag is sitting. ... Electrolux Harmony Canister Vacuum - EL6985 Vacuum

Close the cover


... Miele Carina Vacuum Vacuum

Cover won't close on sears progressive vac. Stuck open


... Kenmore Vacuums

How do u close dyson bin base flap as mine wont shut


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My lightweight hot tap water bissel carpet shampooer will not stop dispensing water. The trigger doesn't seem to be able to close the nipple like cover. I cleaned my machine well. Is there a cable involved here. Could it just need a vinigar treatment ?


Hi Sue. Sorry to hear about the difficulty you're experiencing. You may want to have one of our Authorized Service Centers inspect your machine.Here's a quick link to help you locate one in your area: ... Vacuums

Changing bag? How to close cover after bag change


... Simplicity Jack and Jill Compact Canister HEPA Vacuum Bags

I have a DC14. About a wk ago it was making loud sound and bar stopped turning. i unclogged everything....now the suction works great. However, the bar still wont turn. The belt inside is still intact and isnt loose. Several solutions suggested resetting the "Red" button...i have searched the vacuum over and over. there is NO red or any other color reset button. The bar is set down perfectly in there, the cover plate is installed properly. What other problems could there be? Or do i just need to


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Bin flap catch broke, how do i replace it as i often forget and it empties everywhere as the flap wont stay closed .


... Dyson DC07 Bagless Upright Cyclonic Vacuum

My craftsman 1/2 hp garage door opener opened but wont close and clinks and lights flash


... Craftsman Vacuums

My 4 yr old Nilfisk vacuum cleaner has been working fine up until now. But suddenly, it has hardly any suction power and also, hot air seems to be coming out thru the vents on top and also thru the space that's normally used for blowing air OUT....the outlet with the retractable cover located close to the part where the power cable comes out of and retracts into. I've checked the filter and the hose and they are not clogged...I have also put in a new bag. Not keen to buy another vacuum cleaner u


Hi there SmartAlec from Nelsonvacuums.com.au here.It sounds like a blockage of some kind. The best way to find it is to set the machine up for normal vacuuming and remove o ... Vacuums

My Dyson vacuum cleaner wont close & Open to the upright position to allow vacuuming to take place


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Magic blue canister lid won't close, no suction


... Kenmore Magic Blue 24195 Bagged Canister Vacuum

Belt wont turn makes a loud noise when put on carpet setting


If this is a Dyson with a protected belt that can't be replaced then it will have to be sent out to Dyson or get a Dyson servicepersonnel to check it over - protected belt motors are difficult to fix by yourself. If its clicking all the time, then it ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Suction Cover The suction cover of my Eureka Deep Steam 2575A is broken - the tabs snapped off of the cover so I am unable to screw the suction cover back on. I need to purchase a new suction cover but can't find one anywhere. Anyone know what I can do? thanks


The exact same thing happened to me. i just called and ordered it from eureka. the number is 1-800-282-2886. the cover cost 13.07 and the s ... Eureka 2576A Steam Vacuum

Flair S2220 Removed the four screws holding bottom cover but still unable to remove cover. Is there something else holding cover? The cover on the srew end will seperate but something appears to be holding cover on beater bar end.


Pop out the two little rollers underneath, at the front. you will find two little screws holding it on. Unfortunately, I found after I broke it off! ... Hoover S2220 Flair Bagless Upright Vacuum

Agitator belt failed in my Hoover F5853-900 Steam Vacuum Cleaner. But can not remove bottom Cover .. have removed top cover and two screws from the bottom Cover. The smaller Cover is glued to the large Bottom Cover. Need help.


Hello,Unscrew the plate. check if there is any screws at the bottom, if none, exact little pressure to pull out the bottom cover. At this \015\012point you should be able to see the broken drive belt along with the two\015\012 drive bars ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I am working on a u5290-900 hover vacuum ,when operating dust leaks out under dirt cup cover. i put a piece of card board on top of cover so extra presure would be applied to the top of cover. this seams to have stoped the leak , before adding the card board the cover seamed to lift at the back when cover was locked into place. what do you think?


Dear Sir:Will be better idea to replace the cup cover. The pice of card will not function for a long time. Proceed before another extra problem coming.God bless you ... Hoover U5290-900 Upright Vacuum

I have a Sears Upright vacuum cleaner, model 116.35922500. The vacuum wasn't picking up. I discovered a clog in the nozzle hose. I attempted to remove the cover of the brush unit to clear the clog. I was unable to remove the cover completely, but was able to clear the clog. My problem now is that I cannot replace the cover correctly. Is there a way to remove this cover? Thanks, Elizabeth


When you tried to remove the cover did you have to put a little force on it to get to the clog ... Vacuums

Brushes wont spin


Greetings from GoVacuum,The Hoover SteamVac's are notorious for this exact problem. There are several things that can be causing this probelm.First, what you'll need to do is take the brush block out of the machine. To do thi ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Porsche wont take fuel


I'd think it was a malfunctioning charcoal canister purge valve ... Brembo 2000 Porsche Boxster - S - Gran Turismo Slotted Brake Kit

Beater bar on Kenmore model # 116.25615506 wont got on. Belt is fine.


... Kenmore 25614 / 25615 Progressive Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0319 seconds