Having problems with your Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne ?

The brush on ours wont spin - Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne


Answers :

Take out the brush roller. (turn the plastic lock mechanism with a coin or screwdriver, pull out the plastic holder, and the brush will pop out). The brush roller has two white caps on the ends. Chances are, one or both of these caps have moved out just a bit, putting too much force on the delicate motor. Simply push the caps back firmly into place. Make sure the brush and the surrounding area is clean, put back in and It should spin .
Repair Help & Product Troubleshooting for Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The brush on ours wont spin - Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne


Take out the brush roller. (turn the plastic lock mechanism with a coin or screwdriver, pull out the plastic holder, and the brush will pop out). The brush roller has two white caps on the ends. Chances are, one or both of these caps have moved out ... Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne

I cut all of the hair out of the bottom of the spin-brush on the Dyson Upright Animal Vacuum. Now I dont think I can get the brush back in there correctly. If I squeeze it in there (which it is a VERY tight fit...) then it wont spin. Any thoughts?


Check the roller ends for dirt build up, they pull off and you should be able to clean them out.\015\012The roller should just go back into place if pushed together. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Agitator brush wont spin once vacuum is placed on floor


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=618889&thid=573865\015\012Agitator brush wont spin once vacuum is placed on...\015\012Posted by coral7980 on May 05, 2008\015\01 ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

I have a bissell lift off and the brushes wont spin, i think it maybe because of the internal switch that tells the vacuum that the canister is installed is bad. is there a replacement part for that or do i have to get a new vacuum?


Hi,If you take out the brush roll, holding the ends, make sure that it \015\012spins freely, if not, replace it. Belts stretch after a short time of \015\012use and need to be replaced often.So you could either have a bad brush roll and ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

So i was vacuuming and pulled up a throw rub for about 10 seconds or less. i turned off the vacuum and and now the brushes wont spin. what do you think i should do? Thanks Tommy


You burned a flat spot in your belt - replace it. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

New battery for ergorapido electrolux - Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne


... Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne

Dirt devil vacuum cleaner--trouble vacuuming dirt and pet hair on carpeting --is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up --unless I have just put a new bag on the vacuum... Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums


Try replacing the belt. Rubber belts stretch out after about a year. ... Dirt Devil CE6100 Featherlite Upright Vacuum

We need a new battery - Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne


Try the Electrolux support site >>>>> Support ... Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne

Brush wont spin and no suction through hose - Dyson Ball DC24 Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulties with your DC24. This machine is equipped with a safety device which shuts off the brushbar if something jams it. After you've checked the cleaner head for obstructions and removed any thre ... Dyson Ball DC24 Bagless Upright Vacuum

How can I replace the rechargeable battery? - Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne


Hi There, Officially Electrolux don't want to sell the batteries so they discount the price of the hand held unit. Here in Australia they are called ... Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne

The brushes wont turn - Electrolux EL5020 Vacuum


Have you checked the belt, get back to me if this is not the issue. thanks. ... Electrolux EL5020 Vacuum

My brushes wont spin and i dont know why - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


Your belt has broken and therefore the brush isn't spinning. You can find any vacuum belt at www.vacbelts.com. ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I have a hoover upright vacuum 1 year old and the brushes wont spin but the attachments will still work


Change the belts and if it still doesnt work theres a problem with the motor ... Hoover U5450-900 Windtunnel Supreme Bagged Upright Vacuum

The brush wont spin but the attachments will - Vacuums


Check the belt isnt broken ... Vacuums

Dyson - Ball HEPA Upright Bagless Ultracompact and Lightweight Vacuum brush wont spin


Hi have you checked underneath to see if the belt has snapped, you will find it either side of the brush, if so you can obtain a replacement at most retails stores but take the model number and make with you, hope this helps ... Dyson Ball DC24 Bagless Upright Vacuum

Electrolux EL8602 type 8 Vacuum brush stopped spinning


... Electrolux Vacuums

Brush bar wont spin - Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum


Hi there,Your DC15 is equipped with a sensor which shuts off the brushbar if something jams it. Once you've checked the cleaner head for obstructions, and removed any threads or hair from around the brushbar, you should be able to reset your ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Hoover max extract 60 brushes wont spin - Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum


... Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum

How to empty - Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne


For this unit, you want to start by removing the hand vac portion.along the side of the clear chamber towards the nozzle opening is 2 clips on either side of the unit. Squeeze these clips together and the clear plastic chamber should come ... Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne

Brush wont spin why - Dyson Ball HEPA Upright Bagless Vacuum - Iron/Satin Yellow


Broken or slipping belt replace with new one Buy any vac shop. ... Dyson Ball HEPA Upright Bagless Vacuum - Iron/Satin Yellow

Brush wont spin - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Hi there VacuumGuru here. The key things to check are roller brush bearings, belt and clutch. It is a li ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

U6485900 brush wont spin - Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum


Check the belt av not broke this link is for the manualhttp://hoover.com/file/509/ ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Dyson dc33 brush bar wont spin - Dyson DC33 Multi floor Upright Vacuum Cleaner Blue- Refurbished


... Dyson DC33 Multi floor Upright Vacuum Cleaner Blue- Refurbished

How do I clean filters - Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne


You can download the manual from the link belowhttp://www.electrolux.com.au/Support/Manuals/ ... Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne

Brush at the bottom off my turbo wont spin - Numatic HHR-200 Henry Hound Bagged Canister Vacuum


... Numatic HHR-200 Henry Hound Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1422 seconds