Having problems with your Electrolux UltraLux 2000 Bagged Canister Vacuum ?

Need to open the electrolux vacum

\015 Removed the rubber strip and try to slide the plastic one that holds both sides together but was'nt able to push it forward with the door opened\015

Answers :

The locking key on the side of the vac has a tightening wedge on it so it doesn't slide easily. Spray the entire key top and bottom with WD40 or similar. Grasp at the bag door area with vise grips and pull the key straight forward.
If the key will not slide, you will need to take a large flat bladed screwdriver and lay the blade flat at 90 degrees against the back end of the key. then strike the side driving the key forward toward the bag chamber door. Do not twist.
Repair Help & Product Troubleshooting for Electrolux UltraLux 2000 Bagged Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need to open the electrolux vacum


The locking key on the side of the vac has a tightening wedge on it so it doesn't slide easily. Spray the entire key top and bottom with WD40 or similar. Grasp at the bag door area with vise grips and pull the key straight forward. If the key ... Electrolux UltraLux 2000 Bagged Canister Vacuum

I have my vacume electrical cord tangled inside and disconnected (I can see the open end of the connection from the power cord collector wheel! I need to take the vacume apart so get access to the wire inside. I need to know if there is something else to open other than the 4 screws. Your help is highly appreciated in advance.


Since you did not provide a model number for your vacuum, it is difficult to provide any precise directions regarding disassembly.\015\012\015\012However, most vacuum cleaners are fairly straightforward machines, and as long as you unplug ... Vacuums

Power head on my Electrolux Epic stopped working. Do I need a new one or could there be a part that needs replacing. Can I open it to see?


Have you tried pushing the reset button? I'd try that first. If that doesn't work it could be that the belt is broken. The motors don't go out very often on those. ... Electrolux Epic 6500 Vacuum

I need to open my electrolux AP200 canister to reattatch the power cord which has become diconected. How does one open the shell?


... Vacuums

Need to open the canister to get to the cord assembly of my Electrolux Lux 5000


Why do you need to get to the cord assembly?\015\012If the cord will not retract, tilt the vacuum to about a 45 degree angle and gently tug and release cord. It will usually retract.\015\012Due to problems ensuing from untrained persons ... Electrolux Lux 5500 Canister Vacuum

How do I open the canister of the Aerus Electrolux Lux Guardian? I need to replace the retractable cord mechanism. Aerus won't help me.


Hi there, \012\012This will not be difficult to open, however, inside may scare you. \012\012Remove your hepa filter cartridge (if you have one) \012turn the machine over. \012Undo the 6-8 screws there and pull the ... Electrolux Guardian Bagged Canister Vacuum

Need to know how to open the canister of my Electrolux Ambassador vacuum to replace the switch


If you switch still"clicks" you need a switch rocker, if it no longer clicks you will need a new switch button. You will get best results with the genuine button from an AERUS Electrolux repair shopThere are a set of body keys under the b ... Vacuums

How do i change the belt on my electrolux powerglide vacum cleaner


... Vacuums

I need a service manual Electrolux 6500


I don't have a service manual but maybe I can give you some instructions that will make some sense. Open the front of the canister and remove the bag. As you are looking\015\012at the front of the unit, there are two vinyl covered strips that run\015 ... Electrolux Epic 6500 Vacuum

Electrolux canister vacum model 1401-b makes a whining noise when it's shut off


... Electrolux Vacuums

Need to open rotating brush part of vacumm as motor functioning but roller not turning...perhaps belt broken put need to get into ..inside brush box ...Need help need instruction with diagrams Thanks for help Robert


... Panasonic MC-V9638 Bagged Canister Vacuum

Vacume did not come with screws to hold handle to Vacume need the screws handle falls off vacume hits the floor [email protected] Model # 3041 Type - B2 The answer is simple, send the screws please this will fix the problem. Thanks Dr.Tracy Massie Dr.Tracy Massie Harvard;Dr/PHD; Chief Officer of Internal Medicine;Lead Surgeon Dr. Child Disorders; Princeton Dr. / PhD.; Chief Medical Officer; Lead Councilor


... Eureka 3041BZ Upright Vacuum

Need to replace front vacume propeller


You will have to take most of the vacuum apart to replace your fan. \015\012First; remove the handle assembly by pressing the button on the front of it near the base. Remove the bag unit by twisting the rear of the emptor away from the body, an ... Kirby Generation 3 Bagged Upright Vacuum

I have a freshield vacum sealer it won't open help please it's new I read the instructions but there's no way I can open without forcing it.Elite FSN .


WE turned it off first,turned it on then repressed the hand push button make sure the lid was shut properly then it popped open.so I started again but made sure that both sides were shut. ... Vacuums

The Neutral/drive pedal fell off our Kirby G5 vacuum cleaner. I opened up the area housing its connection to the transmission and a couple of the parts were just laying inside. I need a diagram for assembling it and see if I am missing any parts. It was a refurbished machine and a paperclip fell out of the housing when I opened it. Can you help me?


Hi,In the below links you have the parts diagram as you asked will this helps you?If not let me know i will help you more.http://www.fiorijanitorial.com/s-19-kirby-parts-and-bags-generation-3456.aspxhttp://www.vacu ... Kirby G5 Bagged Upright Vacuum

I need i diagram for an RF fruit machine jammer.as we own alot of machines i need to see if these RF jammers work so i can keep a closer eye open the punters playing are fruit machines


... Vacuums

Need filter i need a filter for a wap vacum cleaner model # 28538 it is a paper filter so can you tell me were to find one thanks len


Check with www.ultimategarage.com or www.industrialvacs.com. They are both stocking dealers for Wap/Alto/Attix vacuums, now a part of Nilfisk of Denmark. Good luck ... Wap 28538 Wet/Dry Vacuum

How do I replace the Powercord on a Fantom XT64K Vacuum. The powercord shorted where is comes out of teh housing. I need to open up the unit & replace but need a service manual of instructions. Thanks Father Lenny


I have done this several times, it's some what simple just take the unit apart and use the old diogram to replace the new one. Or take a digital photo of it opened so you have your own scematic. You should be able to purchess the cord at your local h ... Vacuums

Hayden Super pack deluxe Model # HAY203 serial # D33708207 I need to open the vacuum head to clean out some string caught in the brush. I can't figure out how to open it.


... Hayden Industries SuperVac 3600 Central System Vacuum

My vacum keeps sutting itsself off after a few mins of use. I need to vacum the whole house and dont have tinme for it to cool down every 10 mins


Something is plugged. What you describe sounds like the motors' thermal limiter is opening the circuit to prevent the motor from overheating. You need to open and verify that evey air passageway is clear and the unit has good air flow. I bet you find ... Dyson DC31 Animal Bagless Handheld Cyclonic Vacuum

Electrolux alankey wot alankey is needed for electrolux vitesse petlover 1600w


Get a set of allen keys (may be metric or 'american')- millimeters or fractional inches- can buy a combo set pretty cheaply! harbor freight, ace, etc.- may only need one size- but in the future, may come in handy for other projects! find the one that ... Vacuums

Need connector wires inside wand. Electrolux central vac. 16" wand 1 1/4" wand dia. Don't need wand, just the wires.


Go to a store like Lowe's and look in their electrical department. You need wire the same gauge size (stranded or solid) and comparable insulation. Hope this helps! ... Vacuums

I work for a company and we have bought about 25 hoover upright vacums since november of 2008 from HD supply and we are to refer to hoover for manufacturers warranty. We have a vacum that needs a bag replaced under warranty.


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=560323\015\012Generic problem for all Vacuums\015\012I work for a company\015\012Posted by dmoses96 ... Vacuums

What type of tool do I need to open up the bottom of the Cuisinart DBG-550BCHWS? My on/off and digital clock lights are flashing when I plug the coffee maker in and the maker doesn't not work. I have tried opening and re-closing all compartment doors. Thanks for your help.


Screws are Torqux Tamper-proof/Safety screws size T-10. It's a Torqux \015\012screw with a raised middle requiring a special Torqux wrench. You can buy a T-Handle set at Sears for $35.\015\012\015\012 ... Vacuums

My electrolux ambassador power wand quit working. I replaced the switch that shuts it off when the roller stops, but it wasn't the problem. The on/off switch is fine, the motor is fine. We have traced the problem to the wires inside the canister by opening the inside cover to the bag container. We see the power cords going into the canister but we're not able to get to anything. We can't find any screws to undo that would open it up in order to follow the wires deep into the canister. We've bypa


... Electrolux Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0459 seconds