Having problems with your Electrolux upright advantage model 1572E ?

How to open base to change belt

I have unscrewed the 4 base screws. I have tried to lift the cover of the base while it sits on the wheels and the handle is flat so the whole vacuum is flat on the floor. The cover does not slip off and no luck with screwdriver against the wheels to pry cover up.

Answers :

Repair Help & Product Troubleshooting for Electrolux upright advantage model 1572E

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am smelling a faint burning rubber smell and I think the belt needs changing, but I can't figure out how to open the case to change the belt. Can you help me?

... Hoover U5068-900 Sprint Upright Vacuum

Changing belt how do you remove the base to change the belt

Turn vacuum over, remove looks like 3 or 4 screws, then the top cover will come off, exposing the belt and brush roll. Part 61520 style J belt. ... Eureka 2271 Bagged Upright Vacuum

Change belt How do I open the power head to get to the belt to change it?

... Beam Rugmaster Plus Belt

Changeing belt how do you install a new belt? I have an Eureka, The Boss, bagless, upright. The brush is hardly rotating. I think it could be the belt but i cannot open the vacumm to check it. How can I fix this?

... Vacuums

How to open it to change belt

... Vacuums

Change the belt in my kenmore power-mate 120 amps...how to open it to get to where the belt is???


Last night as I was vacuuming, I noticed that the belt stop indicator light was on. I pulled out the hair that had gotten tangled around the brush in hopes of solving the problem. It didn't change things. I then unscrewed the entire bottom piece to take out the brush roller. I removed hair from the end piece of the brush roller and reattached the belt; however, I cannot figure out where the microchip is supposed to go so that I can reassemble the base piece by screwing it back together. It seems

Not sure what you mean when you refer to a "microchip" but maybe it is a sensor that works with the belt.\015\012Anyway, if you Google the make and model number of your vacuum you can probably get an exploded view or owners manual that might indicate ... Vacuums

The hose works great, but the head of the vaccuum does not pick up anything !!! I checked every opening that may have been clogged, but nothing came up. When I hold my hand under the brush/roller, it seems to be putting out more air than intaking air. Particles "dance" on the carpet, but don't get "sucked up" into the vaccuum ? I have had the vaccuum only 1 year, so the brushes should not be a problem. I changed the bag, and checked the belt. The belt and brushes seem to be OK. ?

Hi there,Uprights are notorious for debris forming clogs when changing direction. The 90 degree turn where the base suction goes up. Have a closer look . You may need to pull the base plate off to access the blockage.Best reg ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Light bulb change on Lux 4000 upright, light at base piece infront of spinning brush, made to look like long thin bulb due to plastic covering, how to open to change bulb 15 watt

... Electrolux Vacuums

Need to change belt on hoover upright model u5093-900, but can't figure out how to open it up to get at the belt.

... Hoover Vacuums

How do you take of the base to change the belt? I removed the 4 screws but still cannot take the base off. I do not want to force (break) it... THANK YOU

If it's an Electrolux power head there will be a 5th screw same length in the base.2 at front corners, 1 front center, 2 mid way back all recessed. Good for asking , do not pry it should pull apart in you hands starting at the front corners ... Electrolux Vacuums

How to open the hoover DM4526 to change the belt

There are normaly5screws 3in the front 2in the back remove these and the bottom should come off pull the brudh off repace belt on to brush put brush back in to seating pull brush on to drive and re,asemble ... Vacuums

Kenmore elegance: how do I open it up to change the belt?

A picture is worth a thousand words, so the diagrams in this manual should be helpful:..35622 Owner Manual ... Vacuums

How to open the beater bar to change a belt

Hi There,Here's a very helpful repair solution that I've written explaining how to fix the belt. There are two hidden screws on your machine that need to be removed first, this repair solution will help you figure out where those screws ... Kenmore 24212 Whispertone Bagged Canister Vacuum

Can t remove base from hoover to change belt. vax upright

... VAX Appliances Vax X5 Bagless Upright Cyclonic Vacuum

Can't get at the belt, on my DC41, to change it. How do you open the housing?

This video will help you ... Dyson Vacuums

I cannot get the Kenmore power-mate open to change the belt? How does it come apart?

... Kenmore Vacuums

I need to change the belt on the hoover preferred 16.0 how do I open it up?

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=683113\015\012Generic problem for all Vacuums\015\012I need to change the\015\012Posted by catch100681 ... Vacuums

How does the bottom open on a Hoover Vac ModleU5064-930 to change the belt ?

If you flip the vacuum over there should be (4) access screws on the base plate that covers the roller brush. Remove those and you will be able to access the belt. The belt you need you can get here: ... Vacuums

Hoover upright soft and light u4266-940 had a pop sound and won't suction. how do I open to see what is wrong and change belt.

Interesting, I just fixed one of thes last Monday for a friend of mine who had the same thing happen to him.To get to see the problem is fairly simple.\015\012\015\0121) Recline the handle of the machine so the whole thing is ... Hoover Soft Light U4266-940 Bagged Upright Vacuum

Trying to change belt in kenmore 3116890 upright vacuum cleaner model116. Can't open vac

... Kenmore Vacuums

Beater bar The beater bar will not work. I have changed the belt and there is a lot of suction from the hose. Just seems like the base is not turning on

You may have a bad switch, one part of it is not turning on the brush roll motor. It could also be the brush roll motor. ... Clarke CombiVac 12 Bagged Upright Vacuum

How do I open the vacuum to change the belt - Vacuums

Most vacuum belts are located at the bottom where the intake is ...less specific where all the dirt gets sucked up into the machine... if you turn the vacuum upside down you should see some screws that hold the bottom plate to the vacuum ... remove t ... Vacuums

I have an eureka power plus vacuum floor cleaner and i have no way of opening the botton to the brush to change my belt for the brush since the brush will not turn.

Look for two screws at the edge of the brush housing. You may see these ones on top. They will be black and recessed ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

How do i open my vax power 5 to change the belt for rotateing brushes

... VAX Appliances Vax X5 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0596 seconds