Having problems with your Electrolux Vacuums ?

How to fix a cord rewinder on electrolux aerus 5500


Answers :

Well it depends if the coil spring is broke or not or if it just came out of its clasp. you can take it apart and see if the coile spring is intact and make shure the teeth arnt stuck there are little plastic teeth that come out that lock the cord in place make shure thoes arnt stuck more than likely thats the problem.
Hi,
\015\012
\015\012these side plastic strips are what hold the top and bottom case shells together. At the front (front of the vac) of the side strip "T" channels, insert a thin metal strip (I used a cut spring tensioner from a metal storm window) into the channel between the channel and the "top" of the T. I noticed some sideplay when I was tearing this thing apart and fiigured they put a one-way notch in the "T". Once you work your shim tool unter the notched piece in the T (it's about a quarter inch back from the front of the vac, the strip slides out of the channel back-to-front, and the case split's in half. Replacing your cord reel should be relatively easy once you can see inside.
\015\012
\015\012Thanks for contacting Fixya
Repair Help & Product Troubleshooting for Electrolux Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to fix a cord rewinder on electrolux aerus 5500


Well it depends if the coil spring is broke or not or if it just came out of its clasp. you can take it apart and see if the coile spring is intact and make shure the teeth arnt stuck there are little plastic teeth that come out that lock the cord in ... Electrolux Vacuums

The cord rewind button for my electrolux vacuum cleaner is stuck so it always rewind the cord. how to fix it?


... Electrolux Vacuums

My Electrolux Aerus auto rewind chord mechanism is broken. Is there an easy way to remove the back of the canister to replace or fix the spring there?


Take out the bag and keep the door open. \015\012While the bag door is still open, turn the machine upside down so you are looking at the serial number.\015\012Pull the cord out one foot.\015\012Use a puddy knife and put it between ... Electrolux UltraLux 2000 Bagged Canister Vacuum

Cord rewinder on a Electrolux model C102J vacum cleaner


Hi there Johnd, SmartAlec from Nelsonvacuums.com.au here. I fix vacuums full time for a living and the first time i had this problem with the australian version of this vac ... Electrolux EL7055A Bagless Canister Vacuum

The cord on my electrolux Epic 6500 has been pulled too far out and will not rewind. How can I access the cord reel to rewind?


There are two keys holding the body together, underneath the bumpers on the side of the vac. With the bag door open these keys when gripped with pliers will slide forward to release the body panels. Before opening the vac, gently push the ... Electrolux Epic 6500 Vacuum

Hi , I have replaced the electric cord on Electrolux Lux Royal vacuum , but the rewind that retracts the cord does not pull it in . The coil spring looks ok but it will not pull the cord back in , any suggestions please . Thanks Dave Ryder


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=564353\015\012Generic problem for all Vacuums\015\012Hi, I have replaced\015\012Posted by dryder on May 02, 2008 ... Vacuums

Hoover UH70120 WindTunnel TSeries problems with the cord. im a tech savy guy and have been trying to fix a cord after it was pulled to far out and now wont auto retract, but just cant find a way to pull the cord rewind mechanism out to work on it. Any advice


You will probably have to replace the cord winding mechanism. I have never had any luck trying to repair one. Cord retracters are great when they work but it seems like they always go bad before too long. On many units you can't even replace the cord ... Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner

I have an aerus electrolux guardian canister vacuum. The cord was damaged but the retraction winder is still fine. I have ordered a replacement cord but I have no idea how to remove the old cord and install the new one. Am I over my head?


The winder is activated by a coil spring located in a drum. The drum transmits the power from the wire with 2 circular contacts. To replace the cable you must dismantle the case to access the drum, take the spring pressure out carefully as to not let ... Vacuums

How do I open the canister of the Aerus Electrolux Lux Guardian? I need to replace the retractable cord mechanism. Aerus won't help me.


Hi there, \012\012This will not be difficult to open, however, inside may scare you. \012\012Remove your hepa filter cartridge (if you have one) \012turn the machine over. \012Undo the 6-8 screws there and pull the ... Electrolux Guardian Bagged Canister Vacuum

Electrolux Epic 6500 SR cord will not rewind - Electrolux Epic 6500 Vacuum


Unfortunately most cord reels cannot be repaired and must be replaced as a unit. That Vac Guy ... Electrolux Epic 6500 Vacuum

How to open electrolux 2100 to fix cord? - Electrolux Vacuums


... Electrolux Vacuums

How do I repair the cord rewinder on an electrolux model #1677?


... Vacuums

Cord rewind assembly Electrolux Z3347


... Vacuums

MODEL D5480 cord won't rewind..how do I take apart & fix


... Rowenta Vacuums

Our Electrolux Lux 5000 vacuum's cord will not rewind. Can anyone tell us how to open the vacuum to access the cordwinder?


... Electrolux Vacuums

Following old directions found online I opened an Electrolux Ambassador III to fix the cord winder. When reassembling, I found a loose white wire. Where should it be reconnected?


A white wire is part of the power wiring (neutral), but if the machine runs ok, it may be a left-over from previous work or original manufacturing. If the machine does not run now, then look obvious bare connectors to reinstall it. Hope this helps! ... Electrolux Vacuums

How do you fix the broken rewind cord on a hoover s1361


... Hoover S1361 Bagged Canister Vacuum

I have a silverrodo and can't get the cord to fully rewind is there a way to fix this? thanks


It's probably a worn out spring. You'll probably need to take it in to the local Aerus Electrolux shop for replacement of the spring, and possibly the entire cordwinder. You can also call them and see if they're close enough for free pick up and de ... Electrolux Vacuums

TOOK MY ELECTROLUX EPIC 6500 CANISTER MODEL 1762 APART TO REPLACE CORD REWINDER. TO MAKE A LONG STORY SHORT,MOST OF THE WIRES CAMES OFF OF HEIR CONNECTIONS. NOW CAN'T FIGURE OUT WHERE THEY GO WITHOUT A SCHMATIC. CAN ANYBODY HELP. THANKS CATHY


Hi,\015\012\015\012I will try to find a service manual for you. ... Vacuums

How to fix the retractable cord, the coil came off. Not sure how to rewind the coil on the spool This is the Miele Solaris S514 model


Greetings from GoVacuum,\015\012\015\012I'll attempt to try and walk you through this repair with a detailed explanation of it, and along with some ... Miele S514 Solaris Turbo Plus Vacuum

Need to replace cord rewinder on electrolux tank vacuum cleaner. How does the canister come apart?


If it's the older style open front and the two rubber strips on each side slide out. this should help you along. ... Vacuums

I have an Electrolux EPIC 6500 SR canister. The power cord is pulled all the way out and will no longer retracted. How do I fix this?


This canister has a dog ear device on the rewind. If you can push the cord in the rewind spring is off track and the spring and spool will need to be reset by opening the vac. If the cord will not budge either way , by now it has likely begun t ... Electrolux Lux 7000 Bagged Canister Vacuum

The automatic cable rewind on my Morphy Richards pod vacuum cleaner keeps retracting. I'd rather it didn't work at all than be constantly pulling out the cord. Is there any way in to fix it or disable it?


Hi\015\012Not really. It means that the cord has been pulled roughly when its been plugged in and the retracter is getting weaker to hold the cord that has been pulled out. Generally though wipe the entire cord from the end of the machine with a dry ... Miele S251i Plus Bagged Canister Vacuum

Electrolux 7055 Need manual to repair rewind cord


Http://evacuumstore.com/s-107-el7055a.aspx ... Electrolux EL7055A Bagless Canister Vacuum

How do i open the housing of an electrolux ambassador model #c101j to fix cord recoil


This can be a complex undertaking, so I highly recommend taking it to the nearest Aerus Electrolux store for repair. I've seen many disassembled machines come in to the shop because the owner couldn't figure out how to put it back together. Any mis ... Electrolux Lux 5500 Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0609 seconds