Having problems with your Electrolux Vacuums ?

I have an older electolux vacuum. It says Epic

\015 I have an older electolux vacuum. It says Epic 8000 on it and the model number is c133a. After operating the vacuum for five or ten minute the red light on the wand comes on and the vacuum turns off. What's wrong and how do I fix it?\015

Answers :

Vacuum either has a clog or full bag that is overheating the vacuum causing the thermal switch to shut it down.
Hope this helps.
Repair Help & Product Troubleshooting for Electrolux Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have an older electolux vacuum. It says Epic

Vacuum either has a clog or full bag that is overheating the vacuum causing the thermal switch to shut it down.Hope this helps. ... Electrolux Vacuums

Can I get a replacement hose for an older model vacuum? Model VNB-7 canister? Just guessing I would say yes. How and where do I order this part? I have probably had this unit for 20 + years! [email protected]

... Metropolitan Vacuum Company Metro Vacuum Magic Air Deluxe 4.0 Peak HP Inflator/Deflator Vacuum

Electrolux epic series 6000 sr model canister...we put a new bag in machine but it wont turn on and the light is on saying the bag is full and needs to be replaced...we tried the on-off switch several times but it wont turn on...why?

... Electrolux Vacuums

Need a user manual for Electolux Epic Floor Pro Model S105b

... Electrolux Vacuums

Says the bag is full when it's not - Electrolux Epic 6500 Vacuum

First try turning dial on top of the machine so the arrow lines up with the smallest dot.The most likely problem is clogged, worn, or broken control valve assembly (CVA). It could also be clogged tubes to the CVA. This is usually caused b ... Electrolux Epic 6500 Vacuum

How many screws are there on the electolux epic 2500 sr on the bottom plate to hold it on?

There should be 5 screws. ... Vacuums

I have older Electrolux Epic Model C102D - warning light is on (icon of cup with bunch of holes in it). Is this about the filter BAG needing replaced or about the HEPA filter? Do I have a HEPA filter, and if so, how do I replace it?

... Electrolux Lux 5500 Canister Vacuum

Electrolux Epic 8000


Oreck xl 21 fan housing has new design. willit stillfit my older vac

It should. You can call Oreck and talk with them and give them the serial number off your vacuum and they can look it up and tell you for sure if it will fit or not. ... Oreck Great XL21 XL 21 8 Pound Upright Vacuum Cleaner

I got this sewing machine , can anyone tell me what this control box is used for ?. It is mounted under the table in front of the motor,It says Control Box on the front and two push button number settings with can be adjusted up or down from ( 0 to 9 ) ,Next to these settings are two toggle switches. One is marked start with on and off and the other switch is marked end with on and off. Above these switches it it says Back Track . The tag on the box says ( Type LE -BB -24 - 110 - 220, 2

Still struggling with your model number. I understand from the added comment this is a Brother sewing machine. I was hoping to find a manual that would be of assistance. Here is a couple of websites that lists available manuals for Brother sewing ... Vacuums

Ok so, here's my problem. I have a nintendo DSi and I'm trying to connect it to the internet. I've been searching on google on how to connect it. They said that i need wi-fi and some say I don't need wi-fi and some are saying i need a wirelerr router and some are saying that I don't need a wireless router. I'm wondering how I should connect my DSi without a wireless router and without wi-fi.

Http://www.nintendodsi.com/meet-dsi-xl.jspI think you are trying to do the impossible but try this site. ... Vacuums

My Itouch says a bunch of numbers on the black screen and the very bottoms say kernel continuation: 0x8 01b3e99 panic: we are hanging in here. . . how can i fix this? my itunes doesnt recongize my itouch anymore!

... Vacuums

I work in the Pittsburgh Public Theatre costume shop. We have an old Rimoldi industrial serger withiut an instruction manual and can't seem to find one online. It says rimoldi on top and the numbers on the front plate are B.29.17 There are numbers on the back, one plate says 194076 and the other 0901-0962 Thank you- any help would be appreciated, Mindy Gregory

... Vacuums

My iRobot Roomba runs for 5 minutes, then it say error 2 open brushes clean brushes, which i did, then 5 minutes later it start again saying error 2 clean brushes.

... iRobot Vacuums

I have a craftman shop vac model 500A , 5GAL.,1.25hp. why does Sears say that's not the model num. IT'S THE ONLY MODEL NUM. ON IT!!! IF IT'S AN OLD MODEL,WHY DONT THEY SAY IT IS THE SAME AS MODEL#***** AND WHY DOESEN'T THE FILTER,BAG'S ect.SAY, WILL ALSO FIT MODEL 500A

... Craftsman 17765 Canister Wet/Dry Vacuum

The head on a epic doesn't work - Electrolux Epic 6500 Vacuum

First check the reset button on the head . next connect the hose directly to the head if its a cannister make sure your hose switch is on . if your mechanically inclined remove the screws on the bottom plate and remove the top with the hose disconnec ... Electrolux Epic 6500 Vacuum

What kind of bag for the epic series 3500 sr - Electrolux Epic 3500 Vacuum

"U" (upright) style bags, available at any Aerus Electrolux store, or from their consultants. These are the genuine bags made only by Home Solutions. Generic bags WILL decrease the lifespan of the motor.\015\012\015\012Contact your loca ... Electrolux Epic 3500 Vacuum

********** about the shop vac L250. Really chaps my --- when it's stupid filter design fills my house with dust because it wont say in place! BIG problem. I'm sure you're going to say it's operator error instead of an engineer flaw!

There is supposed to be a foam sleeve, a paper dry filter and a rubber band mounting ring. It truly is a crappy design. try replacing that foam sleeve ... Vacuums

Runs for awhile then says error 2 please remove and clean roomba's brushes i do then runs for awhile and says same thing no dirt on brushes?

I had the same problem. You must clean this parts and inside this parts: Remove hair with cleaning toolRemove Roomba's brush bearingsClean Roomba's brush bearings with cleaning tool ... iRobot Roomba 560 Robotic Vacuum

I have 2 coleman with double mantle. I have only use it 3 times since I bought it. Since then, I am unable to make both of them start. I have used locally sold petrol. I am wondering whether it is due to the poor quality of petrol or not. In the beginning, I tried to start it with alcohool since I did not know what kind of fuel to use. On the manual, it says that we have to use a special kerozene. But people familiar to Coleman lamp say that petrol should be fine since our old parents hav

If kerosene is specified then because it is a less volatile fuel it wil worrk better just as when you used alcohol.\012Petrol is too volatile and might not work well as the kerosene design is on a different grade and specific gravity.\012 ... Coleman Vacuums

Shampoo-er This seems to be a common problem, the shampooer is putting out alot of water and hardly any suds. I read through the posts about the little filter that sometimes gets out of place and I think I found it in the box - is it about 1" diameter hard plastic ring around very fine mesh? If so where exactly does it go? Some posts say in the hose, and others say in the opening of the tank. Or does it go in the place where the hose attaches to the tray? I also found a round sponge in the box o

It goes on the small hole on the tank where the hose attaches to it. The sponge goes in the hole directly under the on/off valve. Here is a link to my online shampooer instructions.\015\012 \015\012 ... Kirby Ultimate G Bagged Upright Vacuum

I just bought this vacuum at a second hand store. My girlfriend told me to grab it as it such a quailty product. How ever I can't find a model number or anything else. I need a manual please. Does it take bags? Do I need to replace the filter or just wash the one I have? It is black and silver, cannister. It also says big gary's vacuum system warehouse in surry British Columbia, Canada. It also says to use filter pow-r-nozzle 96. I have no idea of the year.

I suggest you google what you know. I dont think anyone here can suggest where you can get a manual for a machine you dont even know the name of.\015\012\015\012You ask about a bag ... I dont know ... is there one in it now? You ask abo ... Vacuums

When it goes onto the rug it says to clean I do and it runs a few minutes and says it again. It never quits on the linoleum

If the sensors become obstructed by dust or debris the infrared signal is weakened. Regularly inspect and clean the sensors and use compressed air for better results ... Roomba Robotic Floor Bagless Vacuum

My Roomba stops within a few minutes of starting it and when I press the button, it says "Remove and Clean Roomba's Brushes." I have removed the brushes and cleaned them thoroughly, but within a few minutes, it stops again and says the same thing.

Hi,Accumulation of hair, dust and dirt in the Gearbox that prevents normal operation of the brushes. As a result, a power output is required to keep the brushes turning. As turning the brushes requires too much power, it con ... iRobot Roomba 4210 Bagless Robotic Vacuum

Cord will not retract on epic 6500 sr - Electrolux Epic 6500 Vacuum

Try tipping it on its end,or nearly so. Then tug gently and release until it retracts. This has worked for me nearly every time I'd tried on various Electrolux vacuums.\015\012If this doesn't work, the vacuum needs to be taken to an authorize ... Electrolux Epic 6500 Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0269 seconds