Having problems with your Electrolux Vacuums ?


Answers :

Repair Help & Product Troubleshooting for Electrolux Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :


... Electrolux Vacuums

My vacuum hose has split very close to the handle- how do I remove the handle, cut the hose at the split & reattach it to the handle unit - Centralux central vacuum system. Where can I find a diagram of how to remove the handle?

Do Not Cut the hose! It has wiring inside to control the vac and power head. This is a swivel handled hose with both low and high voltage contacts in it. The same wiring which gives the hose its ribbing, is conducting current for two applic ... Electrolux Centralux Vacuum

How to clean the filter on a central vacumm? - Electrolux Central Vacuum

Filters are hand washed/rinsed, then allowed to thoroughly dry. It's highly recommended to have 2 filters so one is available while the other is drying. ... Electrolux Central Vacuum

I have a ZB 271 Electrolux Ergorapido vacuum . The battery on the mini vacuum is damaged and won't charge. Where can I find those batteries.

... Vacuums

Trying to find filters for the vacuum - Electrolux UltraLux 2000 Bagged Canister Vacuum

If you use Electrolux bags, they have a built in filter. I don't know of any aftermarket filters. ... Electrolux UltraLux 2000 Bagged Canister Vacuum

No suction on electrolux glider - Electrolux Central Vacuum

Two things are the common causes for this.\015\0121. Clogged hose. Drop a marble in one end and allow it to roll out the other. If it doesn't, there's a clog. Trying attaching the hose to the exhaust port and turning it on. This may blow o ... Electrolux Central Vacuum

No power from central vacuum - Electrolux Centralux Vacuum

... Electrolux Centralux Vacuum

I have an electrolux central vacuum in my house. My central vac hose has something stuck in it, I think, maybe a sock. I tried to put a long dryer wand down it but the hose is just too long. Does this need a repair man or new hose?? Any idea of a way to blow it out? Thanks.

The best way to clear an obstruction is to blow it out by attaching the wall end to the exhaust of a shop vacuum, or using an air compressor.\015\012You can try holding the wand end of the hose directly to the CV in port and turning the machine ... Electrolux Central Vacuum

No suction on my Electrolux central vacuum in all outlets even though motor is running and there is no clog in the hose.

I would start with washing out the ilter really good and letting dry. then try the system. ... Electrolux Central Vacuum

My Electrolux central vacuum power nozzzle was working hit/miss and now has stopped working. The metal connectors in the wand and power nozzle get very hot, enough to burn. The metal connectors also

... Electrolux Central Vacuum

On-off switch My problem is finding a source for an on-off switch for an electrolux vacuum sweeper model 2100. I have replaced the broken toggle and now the sweeper turns on but only as long as the outside button is depressed. It appears that the on-off switch itself is broken as the switch does not ''hold'' when the toggle is activated. It seems to return to it's ''off'' setting as soon as the toggle is released. What ''holds'' the switch in its ''on'' position? Does it depend only on the on-

Hi Hugh. The 2100 has a rocker switch under neath the button. it is probably broken, or the button has a worn detent spring. If you would like, I could send you a switch kit with the rocker, button, and detent spring enclosed for around 20 dollars ... Vacuums

Cant find model U129Q parts - Electrolux Vacuums

... Electrolux Vacuums

I have an electrolux powerplus1800 i cannot find bags for it in limerick city ireland i bought it in argos they dont stock this vacuum cleaner any more

Go to icanhelpsew.com they have vacuums ask them it they can order them for you ... Vacuums

I have a Broan Nutone central vacuum. The power head seems to stall unless you lift up on the handle. I think I may need to change the belt but cannot find a place to purchase one to see if this is the problem Model number BN180 type 1

You are correct, you need a new belt. You can find belts for the Broan BN180 at www.vacbelts.com. ... Vacuums

Helping out someone that has a ECV 1590A model 117A Electrolux central Vacuum. There seems to be a problem with the brushes. I'm looking for a manual or what brushes to get or a new motor. It seems to run fine what it starts.

... Electrolux Vacuums

I need to find schematics for el7055b - Electrolux El7055b Bagless Canister Vacuum

Hello,\015\012\015\012Here's a parts schematic of the Electrolux EL7055B that you requested. If you need to purchase a part for your vacuum, and are not able to find it listed anywhere online, please feel free to contact us, we have acc ... Electrolux El7055b Bagless Canister Vacuum

I live in France and have a FV Favel vacuum cleaner the hose is broken, but can trace no manufacturer to fine a new one, there are no contact details on the instruction manual and I have failed to find any info on the net, can you help? The model No is SL227E

I have exactly the same problem - did you find a supplier?\015\012\015\012Thanks ... Vacuums

Good Evening, What is the best way to find and clear an obstacle in the piping of a Broan Central Vacuum system?

Here is a good resource:How to unclog a Central Vacuum System ... Vacuums

Hi, I have a sanyo SC164R/185R vacuum cleaner and just wanted to know if it has a HEPA filter? I can't find any info on this; the instruction manual just talks about cleaning the filter but doesn't specify what the filter is. I have a child that has just been diagnosed with a dust mite allergy and apparently a HEPA filter is what we need to help iliminate them.

... Sanyo Vacuums

How replace lightbulb on carpet beater (Electrolux central vac). Can't find any screws near light

To replace the bulb you will have to remove the power nozzle cover. Remove the cover by extracting the screws from the bottom. Take notice of which screw comes from which hole. Depending on the year, one screw may be shorter than the others. If put b ... Electrolux Centralux Vacuum

Motor shaft wont turn on EL2050 - Electrolux Central Vacuum

Have you tried running the brush motor without a belt on it? Does it not spin without the belt? If so, you may have worn motor brushes (not too expensive parts, but make sure you order both brushes, or make sure they are sold as a set). If your motor ... Electrolux Central Vacuum

My belt broke and I cannot find a replacement anywhere. Can you tell me where I can buy replacement Sweep n Groom belts for my central vacuum system.

You can get replacement Sweep n Groom belts here:\015\012\015\012Sweep n Groom Belts ... Vacuums

Electrolux Central Vacuum won't turn off

There is a relay board on the unit (where the dirt goes) There are two small wires that connect and usually a switch near by. This switch has an Auto and Manual setting. If set to manual the unit will run all the time or until set back to Auto. If it ... Electrolux Central Vacuum

How do we get a sock out of the hose - Electrolux Central Vacuum

Put the other end of the hose into the wall so that it reverses the suction if you can.. \015\012\015\012DO NOT STICK ANYTHING IN THE HOSE\015\012\015\012If you can't reverse it you'll need to buy a new hose. ... Electrolux Central Vacuum

How do I unplug a hose on a electrolux central vacuum?

You could try poking a whire down the pipe to hook out whatever is blocking it up??? or maybe a friends hoover to revers **** the pipe out ... Electrolux Central Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0918 seconds