Having problems with your Eureka 431A Optima Bagless Upright Vacuum ?

Capture bagless not sucking!

\015 My capture bagless upright will seem to be working, leave streaks of dirt on the carpet and nothing is in the canister! I think it has lost suction...do I have to replace it??\015

Answers :

Both ends of the hose will unscrew, allowing you to push out hair and fiber clogs with a broomhandle. There is a coarse filter above the dustcup which will release with a 1/4 turn counterclockwise, allowing you to remove the hair and fiber bundles trapped in the inlet. The filter below the dustcup also tends to clog. Anything more and you have to start getting out the hand tools. [email protected]
More inlikely the vacuum is clogged either in the hose or the bottom were the dirt goes that hose. Or it might even be a clogged filter. Or your belt might be off or broke.
Repair Help & Product Troubleshooting for Eureka 431A Optima Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Capture bagless not sucking!


Both ends of the hose will unscrew, allowing you to push out hair and fiber clogs with a broomhandle. There is a coarse filter above the dustcup which will release with a 1/4 turn counterclockwise, allowing you to remove the hair and fiber bundles t ... Eureka 431A Optima Bagless Upright Vacuum

I have bissell powerforce turbo bagless upright vacuum. Its a great machine. It is clogged though. I think I was not emptying the dirt collection tray thing enough. How can I unclog it. Its not sucking up like it should. It sucks up most stuff, but its not going into the bagless tray thing like it should


Remove the hose , clear that , then if you take a wire hanger apart you can pull whatever is remaining out of that connection, also remember to clean ( if you have the cleanable filter) the filter and also the top one ... Bissell Vacuums

Eureka capture vacuum - Eureka 8802AVZ Capture Bagless Upright Vacuum, Telescopic Self Cleaning Duster, Power Paw Turbo With Riser Visor, Dual Powered Edge Kleener, Comfort-Gripped Oval Handle, HEPA Filtration, 15 Extra Wide Cleaning Path, 30 ft. Cord Length, UPC 023169120891 8802


... Eureka 8802AVZ Capture Bagless Upright Vacuum, Telescopic Self Cleaning Duster, Power Paw Turbo With Riser Visor, Dual Powered Edge Kleener, Comfort-Gripped Oval Handle, HEPA Filtration, 15 Extra Wide Cleaning Path, 30 ft. Cord Length, UPC 023169120891 88

Help!!!! i have an older model of the dirt devil bagless quick vac. and it has been working great, just last week i was vaccuming my bedroom and i accidentally sucked up a string belt that goes with one of my capris. and today i emtpied out the dirt cup but it seems the the string belt that was sucked up is not within my reach and whenever i start the vaccum i get this distinctive noise that i've never heard before. help.


It's likely wrapped around the brush\015\012pull out the roller and un tangle it ... Dirt Devil M084600 Dynamite Bagless Upright Vacuum

Dirt Devil Upright Bagless Vibe Vacuum no longer sucks


Sounds like there's a clog in the long hose that connects to the dirt canister. Remove the hose completely and check for clogs. There is a blue plastic piece that the hose is attached to. You can remove it by taking out the two screws in the back, ... Dirt Devil M087700SV Bagless Upright Vacuum

Eureka Boss Capture - bagless upright - height adjustment knob


... Hoover U6446-900 WindTunnel Bagged Upright Vacuum

I have a eureka boss capture bagless


By the pic, its not an eureka, its a hoover w.t. s.p . if you removed the clog and still nothing, change the bag or clean the washable filter at the bottom of the bag.(belts should be changed every 6 months) ... Hoover U6446-900 WindTunnel Bagged Upright Vacuum

Electrolux vitesse 1800w bagless upright vacuum cleaner not sucking dirt anymore from the bottom if I'm detaching the hose this works perfectly is just when I insert it in the bottom part this does not work.


... Electrolux Vacuums

Not sucking at full potential - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


You have a clogged hose. The clog must be removed for you to get suction. you might be able to blow the clog out but you will probably have to do some disassembly to remove the clog. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

My dyson dc07 animal bagless upright cyclonic is giving me problems with the bottom part where it sucks up the dirt the part that covers the brushes is not going on like it suppose to what am i doing wrong


CKECK Clutch Assy and belt\015\012bottom part where it sucks \015\0121: try us WD40... \015\0122: Replaced power switch Part No : 910971-01 ... Vacuums

Stopped sucking! - Dyson DC14 Low Reach Bagless Upright Cyclonic Vacuum


Have you emptied the dirt and cleaned the filter? Hope this helps. Good luck! ... Dyson DC14 Low Reach Bagless Upright Cyclonic Vacuum

Eureka capture bagless clogs in the hose with little to no suction power


You can clean out the hose but you will also have to change your filter to get better suction ... Vacuums

I have the eureka bagless capture. The main hose is what I am interested in. I cracked the end of the hose where I would attach other parts such as the slim attachment for corners and to get inside the pillows in my chair, The part that I broke is on the very end of the hose. I had the plastic part clogged with some hair and during the process of getting it cleaned out, the part that I am speaking about is broken. Can you help me. I thank you, Mo moss


Change the hose part try a company called cds they r in the midlands but they courier parts\015\012out 2u dont have their no 2 hand u will need the model number try the\015\012web marting ... Eureka Uno 2998AZ Bagless Upright Vacuum

My Hoover Windtunnel Bagless Vacuum is not sucking anything up for no reason.


... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Eureka Boss Capture - bagless upright - green


\015\012Eureka Boss Capture - bagless upright NOISE PROBLEM FIXXED!!!\015\012\015\012I had the same noise problem as everyone else here and found no solutions on the web. i took the thing apart a few different times to no avail. i read he ... Hoover U6446-900 WindTunnel Bagged Upright Vacuum

How do I change the setting on the capture bagless vacuum from hose to floor?


-Pull out your hose from the hose port, and it should be ready to go. If it is not sucking, then perhaps you have an obstruction in you hose. On the back of the cleaner where the hose attaches, you can squeeze the two tabs and the hose will release ... Eureka 12 Amp Capture Vacuum Upright Vacuum

Why is it not sucking? Why the loud noise? I have a Kenmore Progressive bagless


It's plugged up. Maybe pet hair? Take the hose off and run something through it, clean all the filters, clear all airways if necessary ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

No suction I have a similar problem - volta vortex bagless vacuum will not ****. Worked for 1 job then quit sucking, I have had the heads replaced, then the barrel - 2 months later same problem. I push the power lever to max - 10 seconds later it turns itself down and doesn't work properly. I am over it, now looking for refund


Hi there SmartAlec from NelsonVacuums.com.au here. The problem is going to be the filter. THis kind of vacuum basically replaces the bag with a simple filter and the vacuum ... Vacuums

Funny smell and telescopic reach not sucking - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Almost certainly your machine has a blockage. Follow guidance in the operator manual. If you no longer have the manual, you can download a copy free from the Dyson website. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Don't sucks ditrs - Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum


Is the brush turning?\015\012\015\012If not, replace the belt, check the brush roll make sure the ends turn freely. Other wise, are the filters clean? The hose and/or the dirt inlet by the brush roll may be clogged. ... Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum

It's not sucking up dirt - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


A couple things to check: Is there suction at the end of the hose if you unplug it from the housing. If you have vacuum to the hose, but not to the brushroll, then you may have a clog in the duct.\015\012\015\012Another check is if the ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Bissell bagless sweeper sucks up dirt but will not put dirt in the canister cup. It will pickup until it clogs, then it will stop picking up dirt. It will really hold quite a bit of dirt before it stops completely up. Thanks for any help.


I had the same problem, called Bissell over 10 times! They send me 3 plastic inserts for the dirt chamber, not the problem. I solved it by throwing the Bissell away and buying a Eureka bagged vacuum, no more problems. ... Bissell 6594 PowerForce Bagless Upright Vacuum

I have a windtunnel bagless twin chamber. Model U5753-960. carpet adjustment is not working. It's harder to push than it was. It is not sucking up everything it should be. I just put a new filter in. Very frustrated with vacuum.


You probably need to replace your belt. Rubber vacuum belts require replacement every 3-6 months. \015\012There are 4 screws on the bottom of your machine on the plate covering the brushroll. Remove these, remove the brushroll and belt, place t ... Hoover Vacuums

Bissell bagless is sucking but the debris are not collecting in the canister. Filters have been cleaned & hose not appearing to be clogged.


Have you checked the belt. If the brush is not turning,the brush is not sweeping.\015\012Joe ... Bissell 6594 PowerForce Bagless Upright Vacuum

My Eureka capture bagless vacuum has just started making a loud siren like sound. It is deafening. what is the problem?


Definitely check the belt condition, but I would check the airpath first. Start with the hose, it is very easy to remove and if you hold it to the light can see a clog. Remove clog with a straightened hangar with a rigid wire tied to the end, like ... Eureka Capture Upright Vacuum Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1983 seconds