Having problems with your Eureka 431A Optima Bagless Upright Vacuum ?

Broken canister latch

\015 The little plastic latch that holds the canister in place ( the lower part that is recessed ) is broken. I need to find a new part to replace it. Cannot seem to find one so far...most site just offer replacement bags/filters....etc.\015

Answers :

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=414813&thid=604237
\015\012Broken canister latch
\015\012Posted by nestara on May 17, 2008
\015\012The little plastic latch that holds the canister in place (the lower part that is recessed) is broken. I need to find a new part to replace it. I cannot seem to find one so far...most sites just offer replacement bags/filters....etc.
\015\012
\015\012Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Sorry you are having a problem with the replacement parts for your vacuum but if you contact the Eureka Factory Service line of which I will list below, they will either supply you with the part or give you a contact factory dealer that will get you the part and also you may as for a schematic or and owner’s manual in order to see how to repair the part. If you have further questions, feel free to contact your local vac dealer in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

\015\012http://www.eureka.com Customer Service 1-800-282-2886
\015\012Customer Service Dept for U.S.
\015\012Electrolux Home Care Products
\015\012P.O. Box 3900
\015\012Peoria. IL 61612
\015\012Hours of Operation
\015\012Monday thru Friday 8:00am to 7:30pm CST
\015\012Saturday and Sunday 10:00am to 6:30pm CST
\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.
Repair Help & Product Troubleshooting for Eureka 431A Optima Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson animal canister latch broken


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Broken canister latch


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=414813&thid=604237\015\012Broken canister latch\015\012Posted by nestara on May 17, 2008\015\012The little plasti ... Eureka 431A Optima Bagless Upright Vacuum

Dyson animal canister latch broken


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The latch on the hose (at the canister end) of my electrolux Guardian vacuum has broken. Do you know where I can buy this part. I found many places that are selling the entire hose, but all I need is the latch piece.


Find an Aerus dealer. You can go to aerusonline.com and use the dealer locater and find the closest store. Good Luck!! ... Electrolux UltraLux 2000 Bagged Canister Vacuum

DC04 canister door release latch broken - Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum


... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

Miele callisto vacuum broken latch - Miele S5281 Callisto Bagged Canister Vacuum


... Miele S5281 Callisto Bagged Canister Vacuum

Foot latch is broken. need to replace with new one. how does one access to remove the foot pedal latch. By foot latch, I mean the foot lever that releases the upright to lower the handle and begin vacuuming.


It is accessed from the bottom underneath by the rear wheel. However, If there are and cracks on the pedal release socket area then the base will need replacement. parts are little cost but the unit needs to be completely disassembled. ... Hoover U6446-900 WindTunnel Bagged Upright Vacuum

Hoover turbopower 4900 bagless model U5296-900 - the canister will not seal. Dirt and air leak out where the dirtcup latch mates with the dirt cup canister. how does one fix this kind of issue?


... Hoover Vacuums

The bin latch came apart, 2 springs and cross piece that is the latch. I cannot find an expanded view and have no idea how to put them back . Nothing appears broken or cracked.


Click this link for instructionshttp://dysonmedic.co.uk/replacing-dyson-dc07-cyclone-bin-flap-catch-clip/ ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Broken belt I have a royal canister model 4750 with a broken belt on the power head. I don't know how to disassemble the head to get at the belt.


If you have the power head with the headlight, squeeze the sides of the upper part (almost like a superstructure,) where the headlight is located. It should lift off, allowing access to the screws to get the powerhead apart the rest of the way, and o ... Vacuums

The foot release latch has broken or become unlatched on my uprig


I had this problem once before. The only thing I did was loosen the back 2 screws, take the release latch and just play with it until it catches, rea simple. ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Belt for Hoover Powermax S3606 Canister Vacuum is Broken


Your belt number will be listed on the data label with the model number. Check your local Hoover / Dirt devil dealer for the part. ... Hoover S3606 Bagged Canister Vacuum

Electrolux epic replace broken wand latch


... Electrolux Vacuums

Latch on my dirt devil total pet canister to empty is stuck. how do I make it open


I bet I have the same problem as you. My vacuums canister was put back together backwards and now will not move far enough to click unlocked. I am not sure how to fix this and I cant find anyone on any forums who do :( If you figure it out post it! S ... Dirt Devil Breeze Bagless VacuumVacuum

Progressive Kenmore hose canister connection broken 116,2341130


A regular person with patience can however it is tricky. Kenmore hoses have an arrow at the cuff where the corrugated hose meets the swivel elbow at the machine, and at the cuff where the handle meets the hose. If your parts fit in the handle, the c ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Dyson canister latch won't hold


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Kenmore blue magic lid is stuck and the lid release latch will not open canister


... Kenmore Magic Blue 24195 Bagged Canister Vacuum

Indicator block has broken twice - Kenmore 22812 Bagged Canister Vacuum


If you are referring to the bag fill indicator this is a common occurrence and many mid to low range vacs.It may begin to stick as dirt build s inside. You could try using a multi ply filter bag for less dust leakage ... Kenmore 22812 Bagged Canister Vacuum

Toe latch is broken, how to repair so the thing will stand up properly while using the hose and attachments?


The replacement part cost is $7. Order it from your local dealer and it is easy to replace by yourself with a screwdriver and a pair of needle nose pliers. ... Bissell 8975 CleanView Bagless Upright Vacuum

The foot latch that holds my Bissell 3596 is broken. Can it be replaced or repaired?


... Bissell CleanView 3596 Bagless Upright Vacuum

The brushed roller on my Hoover Upright Canister has quit turning. Is this a broken belt? A friend recommended a "reset" button--is there such a thing?? Everything else works fine; power, suction, headlight. That belt just doesn't work anymore since we accidentally caugght the edge of a throw rug.


Belt. There is no reset on this model. ... Hoover U5507900 Elite Rewind Bagless Upright Vacuum

Is my model nno. US183900 S/N 080600079068 still under warranty? I have a broken hinge post in the bottom cover of the dirt canister. Thank you.


The Hoover Fusion Plus Cyclonic Upright Vacuum has a 1 year manufacturers warranty from date of purchase. You need to check your reciept to see if it's under a year old. Then go to the Hoover.com web site to find the closest Hoover warranty service c ... Hoover Fusion Plus Cyclonic Upright Vacuum Vacuum

My beater bar is not turning so the vaccuum is not picking up. The belt is not broken. The motor is working and I can see the cyclone effect in the canister. I have checked for blockages. I have cleaned the hair and string from the beater bar brushes. What should I do?


You need to replace the belt, it has probably broken. Your actually supposed to change them yearly. Here is a link to\015\012the belt you need and a manual with instrutions: ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My Electrolux Aerus auto rewind chord mechanism is broken. Is there an easy way to remove the back of the canister to replace or fix the spring there?


Take out the bag and keep the door open. \015\012While the bag door is still open, turn the machine upside down so you are looking at the serial number.\015\012Pull the cord out one foot.\015\012Use a puddy knife and put it between ... Electrolux UltraLux 2000 Bagged Canister Vacuum

I have a bissell healthy home vacuum and the roller bar on the base of it is not working. I have checked it for obstructions and it is clear. I have also tried reseating the canister and just about everything I can think of. It's almost like the switch that deterrmines whether or not the vacuum is in the upright position is broken and always says it is upright... any way to fix that? Thanks, Scott Hammersley


... Bissell Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0431 seconds