Having problems with your Eureka 4700A Maxima Bagless Upright Vacuum ?

Thermostat car runs hot

Answers :

Repair Help & Product Troubleshooting for Eureka 4700A Maxima Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Thermostat car runs hot

... Eureka 4700A Maxima Bagless Upright Vacuum

I have bought a HOOvER freespace 2000W cyclonic vacuum cleaner but it runs VERY HOT and I am wondering if this is the usual running temperature. I have cleaned the air intake filter and removeed the e

... Vacuums

The handle for my Eureka 5993 AVZ was getting very hot when used. Finally, the wires around the switch melted and now the vacuum will not work. What is wrong? Is the switch bad? The wires only melted in the immediate vicinity of the three-prong switch. Nothing else appears to be wrong; the vacuum worked fine when it was running - except for the handle getting hot. Thank you!

Try cleaning all...\015\012if have sam paoblem need replaced main motor.... ... Eureka 5893AVZ Bagless Upright Cyclonic Vacuum

Our miele red star(s314i) vacuum was running great and quit suddenly. It had not been running for a very long time and just quit. Newish bag, no clogs in hose and doesn't seem overly hot. the over heated warning light did not come on. I've waited 30 plus minutes to try to restart and no luck. Any ideas

Ok, so if the cord test didn't fix the problem, then it sounds like either the plug has gone bad, or the switch. The plug is a very common problem to go bad, and can be caused by just simply yanking the plug out of the wall, or putting too much tens ... Miele Red Star Bagged Canister Vacuum

Machine running hot. new bag but red flag indicator is fully closed at stsrt up. Runs but overheats and shuts off and red reset light comes on

You may have a blockage in either the hose, the telescopic wand or the power nozzle/floor attachment. The easiest way to tell, as you have a new bag in there is to disconnect the hose and start the machine. If the suction is good there, start to narr ... Miele S548 Bagged Canister Vacuum

I have a Bissell 1622 PowerLifter Powerbrush carpet cleaner and it will not dispense water/cleaner and it will not suction. I have tried just running hot hot water through it and it still won't work.

... Bissell 1622 PowerLifter Upright Vacuum

Hi, I've a Tefal Steam Generator Express Turbo 2910. It won't "steam". The solenoid works when the button is pressed. The pump works. I've cleaned the tank (with white vinegar as recommended on this site!) thoroughly. The water from the steam tank is only "hot" (not scalding as I'd expect it to be). When first switched on and hot enough there is the TINIEST whiff of steam when the button is pressed then nothing more. Do you think this could be the Thermostat Part CS00094126, or can you

... Vacuums

Miele Cat & Dog vacuum gets VERY hot and is VERY loud. Hose has no restrictions and I have changed the dust compartment (motor) filter and the exhaust filter. It still gets hot when I run it with the top open and all filters removed, so I'm guessing the problem is with the motor. Should I be going into the motor compartment? If so, what am I looking for?

Hi\015\012\015\012The fact that it gets very hot could be due to a number of issues.,but the fact that it started making a very loud noise at the same time suggests that there might be more problems maybe brushes etc.\015\012\ ... Miele S514 Solaris Bagged Canister Vacuum

Motor running extremely hot

You might want to check the brushroll. It may need to be replaced. The brushroll end caps on your model should come off easily and if there is a collection of hair, etc under them and you can clean it out, do so. If it is impossible to clean out, you ... Eureka 1934 Bagged Upright Vacuum

When the vaccum is running the motor gets hot & smells & is very noisy.

Sounds like yu may have a clog, either in the inlet by the brush roll, or the hose. If the hose comes loose, see if there is suction there. If no suction then it is clogged. If suction, then the inlet maybe clogged. ... Dirt Devil Reaction Twin Cyclone Upright Vacuum

My filter queen will not run and feels hot

You have got to be kidding me. you want me to pay for your advice after I paid over $2,000 for this vaccum. Not only that, the sales rep that sold the filter queen to me, stole my Oreck vac right out my livingroom. I did not realize until after he le ... Filter Queen Majestic Canister Vacuum

My vac then steam 2in1stoped steaming motor runs gets hot but no steam

... Shark Steam Vacuum, 2-in-1 Vac-then-Steam

Shop vac got hot & will not run

... Shop Vac 584-04-00 Quiet Canister Wet/Dry Vacuum

Vacuum was running unusually hot recently and then

If it was running hot somethinghas melted together and now wont start must be torn apart to see what has failed most likely the vac motor impellar. ... Vacuums

Kirby G4 running very loud and smells hot.

Were you put the belt on see if any thing is rubbing against shaft.it may have been the belt,replace the belt and clean out the bab and also the floor brush. ... Kirby G4 Bagged Upright Vacuum

Hot Smell when I run it

Check to make sure there is no hair on the ends of the axel. Hair will sometimes wrap up around the axel and make it hard to turn. Cut off with razor and place a drop of oil on the ends. ... Hoover Fusion Plus Cyclonic Upright Vacuum Vacuum

Bissell upright has weak suction and motor running hot but can't find a blockage

... Bissell 8975 CleanView Bagless Upright Vacuum

Rainbow Run Hot?

Filho da puta ... Rainbow E series Canister Wet/Dry Vacuum

My shark steam mop is running very hot loosing water and will not steam

... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My sweeper seems to get hot and stop running it starts up again after it cools down can I repair it

... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Burning smell There is a burning smell when I run my Kirby Ultimate G.  The smell seems to be coming from the belt.  I looked at the brushes and they are spinning so the belt is working.  the Post on the vacuum is getting very hot not sure if that is normal.  What is causing this?

Unlock the sweeper brushes and take them out. on each end is a cup bearing and should be free of debris.then check around and under the belt and likely there is debris wrapped around it.the post is getting hot as your pulling too much of ... Kirby Ultimate G Bagged Upright Vacuum

Cord is hot and vaccumn keeps running then shutting off and on

Hi There,May you kindly please clarify what type of vacuum cleaner that you have? The model number may be located at the bottom or the back of the vacuum cleaner, and this number will help me determine what the problem with your vacuum ... Riccar and Simplcity Canister Vacuum Cleaner Deluxe Bare Surface Floor Brus

Steam cleaner stopped sucking up water. Motor still running. It's blowing hot air. I checked the seal on the water recovery tank and it appears ok.

Steam vac won't **** up water ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Motor runs, but noisey, smells hot, brushes don't turn

Joyce sounds like its time to look at the rollers they most likley have strings hair ect if tou know how to remove the roller you might want to get a pair of sissors and get to work what your smelling is the belt getting cloged with debre or all the ... Hoover H3030 FloorMate SpinScrub 500 Upright Wet/Dry Vacuum

Motor dying? recently my herritage has been sounding sick, i tried to use it the other morning and it barely could blow up the bag, there is also a hot smell to it when it is running, the motor doesnt sound as powerful as it use to. Any suggestions?

Replace the carbon brushes in the motor. ... Kirby Heritage II Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0456 seconds