Having problems with your Eureka 5892AVZ Bagless Upright Cyclonic Vacuum ?

Eureka Boss - no suction in upright postion

\015 Been having the same problem since we bought it a few months ago. The attachment has suction, but no suction in upright position. Have cleaned everything - several times. I'm tired of vacuuming bent over using the attachment only~!! What is the cause and if I need servicing - how much can I expect to pay? I bought this vacuum because it was recommended by consumer reports, but regret it.\015

Answers :

When mine does that I find that the hose is not connected properly where it comes off to use the attachments.
If there is suction there, it is a straight shot to the floor unless it is loose where it fits together.
Repair Help & Product Troubleshooting for Eureka 5892AVZ Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Eureka Boss - no suction in upright postion


When mine does that I find that the hose is not connected properly where it comes off to use the attachments.If there is suction there, it is a straight shot to the floor unless it is loose where it fits together. ... Eureka 5892AVZ Bagless Upright Cyclonic Vacuum

No suction with Eureka Boss Pro Lightweight Bagless Upright, 411A


I checked the vacuum hose to see if there was a clog. 1st, disconnect the hose from the unit so you have access to both ends. Now, place a marble or other ball in one of the hose and see if it will make it all the way through. I found ... Eureka 411A Upright Vacuum

I have the Eureka 4870 "The Boss" Smart Vac. The beater bar began to turn constantly and can't be shut by moving the Brush Roll Contol to Bare Floor position or the machine to the upright postion. It has also eaten two new belts. A local tech says he has seen this problem whereby the free-wheel assembly that makes contact with the belt to engage the beater bar is misalgned and cannot disengage. It is usually the chassis which would mean replacement of enough parts that would not be worthwhile


... Eureka Smartvac 4870 Bagged Upright Vacuum

Eureka Boss 4870 -Brush roller won't turn on carpet and turns when its not supposed to (with handle in upright postion). New belt had burning rubber smell right away.


... Vacuums

Clogged hose on Eureka boss - Eureka Boss 7601 Bagged Upright Vacuum


... Eureka Boss 7601 Bagged Upright Vacuum

How to replace belt on a eureka boss vacuum - Eureka 4870SZX BOSS SMARTVAC PET LOVER Bagged Upright Vacuum


If you look on the base plate you should see a diagram of how to do it,but if yours don't have a diagram then remove the screws from the base plate it should be three or four they have arrows next to them. take the base plate off and remove the brush ... Eureka 4870SZX BOSS SMARTVAC PET LOVER Bagged Upright Vacuum

Eureka boss 4870 overheating - Eureka 5849A Boss Bagless Upright Cyclonic Vacuum


... Eureka 5849A Boss Bagless Upright Cyclonic Vacuum

Replace Filter on Eureka The Boss super Lite - Eureka Boss SuperLite Bagless Upright Vacuum, 405AVacuum


... Eureka Boss SuperLite Bagless Upright Vacuum, 405AVacuum

Eureka Boss 2270 hose clogged - Eureka Boss 7601 Bagged Upright Vacuum


... Eureka Boss 7601 Bagged Upright Vacuum

Eureka the boss pro 2272 type av bags - Eureka 5849A Boss Bagless Upright Cyclonic Vacuum


... Eureka 5849A Boss Bagless Upright Cyclonic Vacuum

Looking for Eureka belt 70646A for a Eureka The Boss upright


I just replaced the belt on my Eureka The Boss Smart Vac (Model 4870D). I purchased a namebrand Eureka R belt from a local vendor. I did my best to follow the instructions printed on the bottom of the machine. I turned on the vacuum cleaner and the ... Vacuums

I have a Eureka Mega Boss Central Vac Model # CV1801P. The suction works when the handle button is pushed left (floor mode) but no suction happens when the button is pushed right. When the floor attachment is hooked up and the button is pushed right, the brush rotates, but there is no suction.


... Eureka Vacuums

My eureka optima upright bagless vaccum has VERY low suction using the floor part. the hose has excellent suction. i removed the little translucent door underneath and there were no blockages, i cleaned the brushroll thoroughly and that hasnt helped either. i know this probably isnt recommended but i turned it on to the floor setting with the brushroll off and stuck my fingers up the intake as far as i could, the suction was good further up but it just seems to stop down at the base. because i s


I will try and help here. Is the sole plate on the bottom of the vacuum complety on and there are no visible cracks along the seam where it meets the body? This is the usual cause for this. Onc you take of the plate to access the roller and brushes, ... Eureka 431A Optima Bagless Upright Vacuum

Tear in Eureka Upright "The Boss" 4870


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=414813&thid=652524 ... Eureka 431A Optima Bagless Upright Vacuum

Eureka Boss Capture - bagless upright - height adjustment knob


... Hoover U6446-900 WindTunnel Bagged Upright Vacuum

Eureka upright vac. no suction


Dear wymanwong\015\012\015\012Righteo, your problem is not exactly all that straight forward as i dont have a great deal of information to go on with regards to this type of issue and this make/ model of vendored appliance, so I will begi ... Eureka 4467AV Upright Vacuum

Need user manual for eureka model 405 - Eureka Boss SuperLite Bagless Upright Vacuum, 405AVacuum


... Eureka Boss SuperLite Bagless Upright Vacuum, 405AVacuum

Need manual for eureka boss 402 - Eureka 402A Bagless Upright Vacuum


... Eureka 402A Bagless Upright Vacuum

Eureka 3621 mighty mite - Eureka 5849A Boss Bagless Upright Cyclonic Vacuum


... Eureka 5849A Boss Bagless Upright Cyclonic Vacuum

Eureka 4773 suction - Eureka 4700A Maxima Bagless Upright Vacuum


... Eureka 4700A Maxima Bagless Upright Vacuum

Eureka the boss vaccuum will not suction - Eureka Atlantis 2590A Wet/Dry Vacuum


... Eureka Atlantis 2590A Wet/Dry Vacuum

I have the Eureka Whirlwind upright vacuum. All of a sudden there is no suction- the hose has suction but not main part. I have no idea- but the brush part is not turning??? should I get a new vacuum or is this an easy fix? thanks!!!!!


If the belt isn't turning then it has snapped. Check the top of the hood for two or three crosshead screws; two at the front and one under neath by the left hand side if looking at the upright from the front. Its easy to fix if you take your ti ... Eureka WhirlWind Litespeed 5844 Upright Vacuum

No Suction I have the Eureka Upright Vacuum. I have no suction when doing regular vacuuming but it seems to have function with just the hose. Also, the height adjustment doesn't seem to work at all. The vacuum has only be usede 3 times. Thanks


Is your brush roller turning? unplug the vacuum and see if you can turn the brushroller by hand.if it turns real freely the the belt is broke ,if its real hard to turn then something is caught up around the bearings on the ends of the roller.my sugge ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

What bag fits the 7618 eureka boss lite - Eureka 7618 Bagged Upright Vacuum


It takes the Eureka Style U Bag ... Eureka 7618 Bagged Upright Vacuum

I have a Eureka Boss Model 411... I need to know where the reset button is for the suction motor. The canister was clogged on the backside, I didn't see it and the suction motor shut off. I have cleared the obstruction, but don't know where the reset is for that motor. I know how to reset the brush head motor.


If your vacuum motor overheats, it will stop working. it will start working again once it cools. ... Eureka 411A Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0554 seconds