Having problems with your Eureka Altima Upright Vacuum Model 2996AVS Vacuum ?

Eureka Altima (yellow)

\015 My yellow Eureka Altima has this problem::"clog inside the machine after the dust channel from the beater bar and before the main hose assembly goes into the bin." (part answere from ukvac) Besides all these clog issues, I am guessing from its great power :), I LOPVE this vac this is like the best vac ever & always picks so nicely when its working. How do I get this clog from inside??\015

Answers :

I found it is easiest to clear the hose with a plumbers zip it strip . Harbor freight has them pretty cheep
The hose under your dusting tool, remove that and you should see the clog. i had the same issue and also found that the smell that is emitted went away after i unclogged it
Repair Help & Product Troubleshooting for Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Eureka Altima (yellow)


I found it is easiest to clear the hose with a plumbers zip it strip . Harbor freight has them pretty cheep ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

I HAVE A EUREKA ALTIMA AND CANT CHANGE BELT - Eureka Altima Upright Vacuum Model 2996AVS Vacuum


The hood will come off if you loosen two screws at the front on top of the hood by the brush bar bit that is slightly raised. Then there's a screw to the left hand side of the upright either below the hose or duster area. Once all screws are undone, ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

How to change belt in eureka altima vacuum - Eureka Altima Upright Vacuum Model 2996AVS Vacuum


Here is the belt you need to replace and the manual which has instructions:Eureka Altima Belts ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Eureka Altima I have a Eureka Altima vacuum and can't get the dust cup out.


The dust cup has a small gray tray that appears to be part of the cup, but is not. I made the same mistake also and almost broke the stupid thing trying to get it out. Simply push the lock to the left to unlock. Gently lift the dust cup and not the g ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Eureka altima model 2993 how to change belt - Eureka Altima Upright Vacuum Model 2996AVS Vacuum


... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

I have the yellow altima vac. for a while now I can not get the darn thing to pick up properly. Or should i say keep it up.. The vac does seem to be getting everything picked up but as soon as you turn it off, you have a mess under the vac.. I have checked for clogks and can't seem to find any.. I have removed the hose, Nothing there.. And yep have removed the yellow thing inside the trash cup.. Is there anything else you could suggest??


If it smells hot, then there's a strain on the motor no doubt about it. Check the suction channel behind the sole plate and remove all of the hoses to check for a clog. It could well be that there is a clog inside the machine after the dust channel f ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Eureka IMA Vacuum - brush not turning - Eureka Altima Upright Vacuum Model 2996AVS Vacuum


Your belt is probably stretched or broken. Here is a link to the belts you need and to the manual which has instructions:Eureka Altima Replacement Belts ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

How to change belt on eureka vacuum 2996 - Eureka Altima Upright Vacuum Model 2996AVS Vacuum


The information you're looking for can be found on page 8 of the manual via this link: http://www.eureka.com/service/manuals/80244.pdf ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Manual for eureka altima 2961 vacumn - Eureka 2961AVZ Bagless Upright Vacuum


Here you are, Please vote and rate me if this helps.\015\012http://www.eureka.com/service/manuals/80244.pdf ... Eureka 2961AVZ Bagless Upright Vacuum

I would like to disassemble my eureka altima to clean brushes


The Altima line has 2 screws on the hood (part where the knob is that says high carpet and low carpet) that you remove with a philips head screwdriver then you just lift the hood of the vacuum ... Eureka 402A Bagless Upright Vacuum

How do I change the belt on Eureka Altima 12 v


Here is\015\012a link to the owners manual which has instructions and a link to the\015\012belt you need.Eureka Altima Owner's Guide ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

How do I to change the belt on an eureka altima 12?


The belt is on the bottom right (looking at it from the front). the Eureka website does have the manual for download, http://www.eureka.com/service/manuals/8024 ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

EUREKA Bagless altima shooting out debris and not picking it up


Did u clean the filter? if u get a new one i would suggest a kirby. bu get a self-propelled model. THEY LAST FOREVER!!! ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Eureka altima stopped power mid vaccuming, have changed outlits


Make sure all your filters are clean,try to turn the brush roller by hand a few times if it turns real freely then the belt is broke.if it is reall hard to turn then you have something wrapped around the ends of the roller where the bearings are.your ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

I need a parts manuel and a owners manuel - Eureka Altima Upright Vacuum Model 2996AVS Vacuum


Go to eureka.com and look for your model and find the manual you can download it ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Belts how do you put a new belt on the eureka altima


There should be 2 or 3 screws on the top cover, then you can remove the cover and the brush roll and belt are in the open. Put the belt around the motor shaft, then around the brush roll and stretch it until it goes into the place for the brush roll ... Vacuums

Looking to replace vac belt on eureka altima bagless upright


Hi Jim\015\012You should find the cross head screws on top of the hood - look below the duster and there should be a screw there, also another screw on the other side and two either side of the main floor head.  ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Eureka altima 2993av bagless


HiSounds like its blocked. Check under the glide plate and the hose. Look in the book for model specific details ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

CHANDE BELT HAVE A EUREKA ALTIMA AND CANT CHANGE BELT


You can find out how to change the belt in the manual here that I included on page 4.\015\012\015\012http://www.eureka.com/servlet/FindOwnersGuide ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

No suction, clean filters. - Eureka True Clean Upright Vacuum (Yellow) 2961BVZ


... Eureka True Clean Upright Vacuum (Yellow) 2961BVZ

Eureka Altima Spitting dirt back out


Your intake is clogged at the bottom and your filters are dirty not letting it create suction.is the dirt cup full ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Eureka Altima Bagless Upright Brush is not spinning


You probably just have a broken belt. The belt needs to be changed about every 6 months regardless. I believe yours takes a style EXT U(Extended life upright), or a regular Eureka "U" belt works fine too. ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

What type of belt fits best with my eureka altima 12 amp


The replacement from Eureka will work for certain, but any brand of belt that indicates it can be used on that vacuum will work.Let me know if you have any additional questions. ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Eureka Altima Vacuum Cleaner w/Power Paw


The way I resolved the problem was to remove the cover at the end of the power paw. Then remove the so side black covers for the shaft. Remove any debris and hair and then put back together. This solved my problem. ... Eureka Vacuums

Eureka altima vacuum cleaner


This happens to me...I am actually on here to figure out why the hard-to-find belt keeps breaking...What usually works for me is an air compressor so it will force the clog out, or you can try another vacuum or shop vac if you have one, or could try ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0418 seconds