Having problems with your Eureka Atlantis 2595A Upright Wet/Dry Vacuum ?

Spray button doesn't function on Eureka Atlantis.No water spray.

\015 Is this an electrical switch or a mechanical switch? Silly Torx screws a pain to remove.\015

Answers :

Should be mechanical, torx screws are easy to remove with a torx screw driver
Repair Help & Product Troubleshooting for Eureka Atlantis 2595A Upright Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Spray button doesn't function on Eureka Atlantis.No water spray.


Should be mechanical, torx screws are easy to remove with a torx screw driver ... Eureka Atlantis 2595A Upright Wet/Dry Vacuum

Have a bissell 9400-E and it doesnt spray cleaning fluid from underneath the machine, the hand tool works. have trie purging the machine with hot water in fluid tank and continuously hollding button with no joy can you help please? as my machine is just out of warranty


This may be caused because the pump belt has stretched or broken or the pump is seized and will not turn. Remove the pump belt and turn the pump rotor with your fingers to see it turns freely. If it does then the pump should be OK but the belt ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

The trigger on My Monster 1200W is not working. I poured the water in the canister and it sounds like it is steaming but when i go to push the button it doesnt spray.


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Eureka Atlantis 2591A Extractor - Won't spray


No sray water ... Eureka Atlantis 2591A Upright Steam Vacuum

Sprays water without pushing the spray button


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Does not spray or wet surface im cleaning doesnt transfer water from one side to another


... Bissell SpotBot Robotic Wet/Dry Vacuum

Eureka 2812 shop boss wet/dry..water is being sprayed out of the


Je ne trouve pas un magasin ou je puisse acheter des filtre a poussiere ... Eureka 2812 Wet/Dry Vacuum

Eureka 2586b carpet cleaner wont spray water, suction is great


... Vacuums

I have an Eureka Atlantis deep steam carpet cleaner. Havent used it in awhile. Tried to use it today, the water or shampoo will not spray. How do I get it apart to clean the nozzles?


... Eureka Atlantis 2591A Upright Steam Vacuum

Bissell proheat 2x rug cleaner wont spray water out on rug when you press button


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.B ... Bissell 8910 ProHeat Clear View Upright Vacuum

I brought an eureka model 2591av shapoo machine in 2004 I've only used the machine 4 times. now the it does not spray out the solution on the floor but it will **** up water, the vacuum part works. I took it to a repair shop, they said it was the pump that was broke and will cost $95.00 to fix. The purchase price of unit was only $129.00 My question to you is does that sounds like an honest or comparible diagnosis.please respond at ([email protected])


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=559297\015\012Generic problem for all Vacuums\015\012I brought an eureka model\015\012Posted by wadda08 on Apr 3 ... Vacuums

My carpet cleaner is not spraying out water or solution. motor is working, heater is working but nothing coming out when i press the button


Check if bottom of solution tank and/or lines are gummed up. Clean and blow out lines and inspect check ball assembly.\015\012Hope this helps. Could use more info.\015\012Bob ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I havent owned my numatic george wet/dry hoover long but recently noticed it doesnt spray ot water anymore... why would this be? and how can i solve this?


... Numatic GVE370 Canister Wet/Dry Vacuum

Eureka atlantis...water won't spray out.


Try taking the upholstery nozzle apart, there are only a couple of screws, and make sure the little tube is attached where it is supposed to be attached. Be careful when you take it apart, and remember how to put it back together. Try running some ... Eureka Atlantis 2595A Upright Wet/Dry Vacuum

Water only dribbles out when button is pushed. It no longer sprays. Have cleaned nozzle several times.


... Bissell 1725-1 Little Green ProHeat Wet/Dry Vacuum

Water is not spraying out when button is pushed.


My guess is the wire to the switch came off - unplug unit - unscrew the top two screws on the handle - remove the cover above the button. should be two wires connected to the switch - the top one is not used. Hope this helps. ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

I have a Hoover steam vac spin scrub and with the attachment the water sprays out continuously reagardless if I press the button.


Just had this problem. Use a pair of needle nose pliers to tug up on the white nozzle at the end of the attachment. It should slide up about 1/4 of an inch and then you should be good to go. Be careful not to snap the plastic. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a Bissel 9300-C 0714 BC Carpet Shampooer. It was working great and all of a sudden it stopped working. It still sucks up dirty water but it does not spray water onto the carpet. I can get it to spray water through the smallest hand attatchment but not through the large hand held piece on the base of the machine. I really hope you can help me, I am a dog groomer and I really need my machine to work properly. I can get it to spray water out of the smallest hand attatchment but that's all t


The spray jet has become clogged from the soap.... just clean it out. same thing happened to my attachment. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Have a Bissell Proheat2 will not spray water from the carpet power head but sprays from tools setting Does anyone know how to get water to spray or clean out water


I had this problem. It was small pieces of debris that got into the solution lines and clogged all the nozzles. There is a nozzle for the handheld attachments, one on the front of the machine for spraying spots and two nozzles underneath just behind ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell will spray water when set to water rinse, but as soon as it is set to light, normal, or heavy cleaning, there is no spray. I have tried priming but to no avail. I put plain water in the solution tank to test without ay success. It is like it loses it's prime whenever you try to use a solution mix. Once you set it back to water rinse only and go through the priming steps, it is OK. Any help would be appreciated. Thanks.


Please check the following with liquid in both tanks.\012 \012- Check to see if the machine will spray through the hose with the setting on tools. If it does, the pump is fine. Continue troubleshooting.\012- Check for ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Hoover steamvac maxextract 60 wont spray clean water


... Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum

Wont spray water on the carpet


I had to remove the line from the pump that goes to the 2 spray heads. Sucked on it and got it cleard out. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

The spray button on my bissle power steamer spray button sticks.


You may want to replace the belt. bissell uses a belt driven pump. here is a guide to show you how to replace the belt. ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

The unit (9400-3) is not spraying water from the lower deck but will spray from the hand held wand. Checked water levels and water/soap dispenser valves which seem to be working fine. Spray nozzles are not blocked. Where do you look now.


Same problem i have got, spent one day on the bloody thing but of no use, the only solution is to spray water from bucket and use the cleaner to **** it up. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell proheat My Bissell won't dispense cleaning formula but it sprays water and sucks up the water. The attachments spray water but not the soap also. how to fix?


First is the smart mix valve turning like it should? If it is then replace the soap dispensor. Also is the gasket on the valve at the bottom of the bottle? ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0639 seconds