Having problems with your Eureka Mega Boss 4460DT Vacuum ?

My eureka has no suction at all

\015 When I vacuum there is absolutely no suction. I have taken off the hose but cannot find a blockage. What else can I do?\015

Answers :

Try taking out the bag and checking to see if the inlet port onthe bottom of the inside of the bag bay is giving any sucion or if you can feel air rushing past your fingers. if there is then there is eiher a full bag, or a clog in oneo f the inlet ports going to the bag that the vacuum cannot clear. also make sure your filters are clear of debree and clean.
Repair Help & Product Troubleshooting for Eureka Mega Boss 4460DT Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Suction Cover The suction cover of my Eureka Deep Steam 2575A is broken - the tabs snapped off of the cover so I am unable to screw the suction cover back on. I need to purchase a new suction cover but can't find one anywhere. Anyone know what I can do? thanks


The exact same thing happened to me. i just called and ordered it from eureka. the number is 1-800-282-2886. the cover cost 13.07 and the s ... Eureka 2576A Steam Vacuum

I have a Eureka Mega Boss Central Vac Model # CV1801P. The suction works when the handle button is pushed left (floor mode) but no suction happens when the button is pushed right. When the floor attachment is hooked up and the button is pushed right, the brush rotates, but there is no suction.


... Eureka Vacuums

My eureka vacuum won't suction and starts to smoke when I try to use it. It sounds like it is suctioning when I first turn it on, but after about 20 seconds it begins to smell like burning and does not suction at all. I have tried cleaning and unclogging the filter and everything. It's bagless so I don't need a new bag.


The problem is that your belt is stretched and worn. This causes that burning smell and it also causes the vacuum to not pick up well. You need to replace the belt. Here is the belt you need and the manual with instructions: ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

My eureka optima upright bagless vaccum has VERY low suction using the floor part. the hose has excellent suction. i removed the little translucent door underneath and there were no blockages, i cleaned the brushroll thoroughly and that hasnt helped either. i know this probably isnt recommended but i turned it on to the floor setting with the brushroll off and stuck my fingers up the intake as far as i could, the suction was good further up but it just seems to stop down at the base. because i s


I will try and help here. Is the sole plate on the bottom of the vacuum complety on and there are no visible cracks along the seam where it meets the body? This is the usual cause for this. Onc you take of the plate to access the roller and brushes, ... Eureka 431A Optima Bagless Upright Vacuum

Suction switch I used my new eureka optima once and now it has no suction. The suction only switch does not turn on. I've checked for blockage and can't find any


Leave the thing off for about 30 mins, let it cool. Take that time to clean out all of pieces. Its a pretty simple machine, but has many suction points. Mine killed around Christmas time. Flippin pine needles got caught everywhere,clogged the wh ... Eureka 431A Optima Bagless Upright Vacuum

New Eureka 5893 BVZ looses suction


Eureka is about the most helpless website ever!!! did u try cleaning the filters? ... Eureka 5893AVZ Bagless Upright Cyclonic Vacuum

My eureka vacuum model 4341 has no suction. The belt still turns the beater bar and the power still turns on but there is no suction both underneath and when using the attachment.


... Eureka 4341 Vacuum

Eureka bagless has no suction. Filters washed with each use and canister empty. Some hose suction when covered but runs right over lint and crumbs


Check to see if the hose is clogged ... Eureka 2961AVZ Bagless Upright Vacuum

I own a Eureka Whirlwind Life Speed 12 amps 15" wide. I have suction thru the attachments but no suction from the main vacuum.


... Eureka Whirlwind Litespeed 5840 Bagless Upright Cyclonic Vacuum

I have the Eureka Whirlwind upright vacuum. All of a sudden there is no suction- the hose has suction but not main part. I have no idea- but the brush part is not turning??? should I get a new vacuum or is this an easy fix? thanks!!!!!


If the belt isn't turning then it has snapped. Check the top of the hood for two or three crosshead screws; two at the front and one under neath by the left hand side if looking at the upright from the front. Its easy to fix if you take your ti ... Eureka WhirlWind Litespeed 5844 Upright Vacuum

Eureka the boss vaccuum will not suction - Eureka Atlantis 2590A Wet/Dry Vacuum


... Eureka Atlantis 2590A Wet/Dry Vacuum

Eureka 4773 suction - Eureka 4700A Maxima Bagless Upright Vacuum


... Eureka 4700A Maxima Bagless Upright Vacuum

Smell/suction I have a Eureka Altima Model 2991 Type AVZ. I have suction when I use the power paw and attachments. I have all hoses clear. My brush is spinning and belt is not broken (I opened it up and checked), but I have no suction when I turn it on to vacuum my living room carpet. I also have a burning smell to go with it after about 30 seconds. I've never had a problem with this vacuum cleaner before.


Ours started smelling too, and it seems that the plastic end on the roller brush was melting. In process of finding rollerbrush for it now ... Eureka 2971AV EZ Kleen Bagless Upright Vacuum

I have a Eureka Boss Model 411... I need to know where the reset button is for the suction motor. The canister was clogged on the backside, I didn't see it and the suction motor shut off. I have cleared the obstruction, but don't know where the reset is for that motor. I know how to reset the brush head motor.


If your vacuum motor overheats, it will stop working. it will start working again once it cools. ... Eureka 411A Upright Vacuum

Eureka Optima vacuum has suction at the hose but not at the floor. I took out the filter and it still isn't suctioning so I don't think it is the filter.


It sounds like you have a plug. check where the hose goes into the back of vac. it should have a clip remove this and see if there is a plug there ... Eureka 431A Optima Bagless Upright Vacuum

No Suction I have the Eureka Upright Vacuum. I have no suction when doing regular vacuuming but it seems to have function with just the hose. Also, the height adjustment doesn't seem to work at all. The vacuum has only be usede 3 times. Thanks


Is your brush roller turning? unplug the vacuum and see if you can turn the brushroller by hand.if it turns real freely the the belt is broke ,if its real hard to turn then something is caught up around the bearings on the ends of the roller.my sugge ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

No suction eureka powerline - Eureka Powerline LiteSpeed 5845 Upright Vacuum


... Eureka Powerline LiteSpeed 5845 Upright Vacuum

'eureka whirlwind lite' vacuum - brushes turn but no real suction


... Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum

Low suction on Eureka spinduster vacuum cleaner


The belt has stretch enough so as to not drive the brush roll under load. Try a new belt. ... Eureka 2971AV EZ Kleen Bagless Upright Vacuum

Hello, I have a Eureka 71b handheld vacuum. There is literally no suction. I checked the hose and it is NOT clogged. I thought it might be the filter so I bought a new filter. Still no filter. The rot


... Eureka Vacuums

No suction or spray - Eureka Atlantis Steam Cleaner


I got the machine working. I think because it hadn't been used for awhile that the seals were dried out. I wet them and let it sit for awhile and then I could push the containers all the way in and seated them properly. Then it started working no ... Eureka Atlantis 2591A Upright Steam Vacuum

Eureka upright vac. no suction


Dear wymanwong\015\012\015\012Righteo, your problem is not exactly all that straight forward as i dont have a great deal of information to go on with regards to this type of issue and this make/ model of vendored appliance, so I will begi ... Eureka 4467AV Upright Vacuum

My Eureka Mighty Mite 3670 - improper suction


... Eureka Mighty Mite 3670 Bagged Canister Vacuum

Hose suction Eureka theboss smartvac


There has to be a clog in the hose, Unhook the hose and drop like a big marble in it to see if it comes out the other end. ... Eureka 5892AVZ Bagless Upright Cyclonic Vacuum

Eureka Boss - no suction in upright postion


When mine does that I find that the hose is not connected properly where it comes off to use the attachments.If there is suction there, it is a straight shot to the floor unless it is loose where it fits together. ... Eureka 5892AVZ Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0380 seconds