Having problems with your Eureka Oxygen s 6992 Bagged Canister Vacuum ?

Cords for an Eureka Oxygen 6992A

\015 The plug connection between lower wand and the motorized nozzle seems to be partially burned out and does not maintain contact. Therefore, the nozzle works for a few seconds and stops. Can I purchase the cords I need? Is it possible to replace the cord on the motorized nozzle? I don't see the cords on the list of parts available to purchase. Our local vacuum shop would not fix it. Thank you.\015

Answers :

Yes, that short cord in the power nozzle can be replaced and BOTH wands should also be replaced, not just the one that appears burnt. If your locan vac shop won't fix it, contact Eureka at the customer service number on the bottom of your vacuum. They will most likely set you up with the correct parts.
Repair Help & Product Troubleshooting for Eureka Oxygen s 6992 Bagged Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cords for an Eureka Oxygen 6992A


Yes, that short cord in the power nozzle can be replaced and BOTH wands should also be replaced, not just the one that appears burnt. If your locan vac shop won't fix it, contact Eureka at the customer service number on the bottom of your vacuum. The ... Eureka Oxygen s 6992 Bagged Canister Vacuum

The power brush floor rug attachment on my Eureka 6997 A Oxygen Canister Vacuum goes on an off as I use it. I replaced the The power cord from the handle has 2 plug in connections: 1 at the handle / upper wand 1 at the lower wand top of the power brush attachment I replaced the entire wand assembly and it worked great for a year or so and now it's doing the same thing again. I was told to keep the power switch on the handle set to off when connecting the power brush attachment or it will bu


This is from the prongs not making a good connection causing an arch inside the plugg causing what looks like rust on the plugg. I would try snugging up the connection by squeezing the female section to get a better connection on the prongs when it i ... Vacuums

Electrolux Oxygen Classic cord winder/cord reel disassembly?


... Electrolux Vacuums

Eureka model 8803 how do replace cord - Eureka 5892AVZ Bagless Upright Cyclonic Vacuum


... Eureka 5892AVZ Bagless Upright Cyclonic Vacuum

Eureka rally 2 won't turn on - Eureka Rally 2 Canister Vacuum with Automatic Cord Rewind, 980A


... Eureka Rally 2 Canister Vacuum with Automatic Cord Rewind, 980A

Eureka capture vacuum - Eureka 8802AVZ Capture Bagless Upright Vacuum, Telescopic Self Cleaning Duster, Power Paw Turbo With Riser Visor, Dual Powered Edge Kleener, Comfort-Gripped Oval Handle, HEPA Filtration, 15 Extra Wide Cleaning Path, 30 ft. Cord Length, UPC 023169120891 8802


... Eureka 8802AVZ Capture Bagless Upright Vacuum, Telescopic Self Cleaning Duster, Power Paw Turbo With Riser Visor, Dual Powered Edge Kleener, Comfort-Gripped Oval Handle, HEPA Filtration, 15 Extra Wide Cleaning Path, 30 ft. Cord Length, UPC 023169120891 88

Need new power cord for eureka 402a


... Eureka 402A Bagless Upright Vacuum

How to access cord connection Eureka 3712 B cannister


This might be trial by ordeal---you may have to begin taking screws out until the unit separates where you can pull the case apart to get at it--note where screws go if different types etc. This unit is so old a service manual might not be ... Vacuums

Eureka retract cord


... Vacuums

Electrolux EL 7001 Oxygen 3 power cord continually retracts


The button has two parts - the inner part (button) and the outer part (surrounds the button). The press the outer part to deactivate (pop out!) the inner part.It took me a while to figure this thing out, but I was glad the vacuum wasn't b ... Electrolux EL7055A Bagless Canister Vacuum

Replacing Switch & cord on OLD Eureka upright 403B or 403S (can't read)


Http://geeksquad.fixya.com/support/t581907-replacing_switch_cord_old_eureka\015\012Generic problem for all Vacuums ... Vacuums

Change the power cord on a Eureka series 3270-3275 vacuum cleaner


... Eureka Vacuums

Eureka ESP repair cord


Check outhttp://www.ragamcords.in/ ... Vacuums

I need to replace the power cord on my Eureka 2271, and would like know how to get into the connections?


... Eureka 2271 Bagged Upright Vacuum

Belt?! hello, I need to change the Eureka Oxygen Canister Air Driven Upholstery Tool's Belt (model 5860Avh), but I don't know which one to get? any help please? Best, Pierre.


You will probably have to order it online. ... Vacuums

Replace power cord - Eureka Smartvac 4870 Bagged Upright Vacuum


... Eureka Smartvac 4870 Bagged Upright Vacuum

How to replace/repair power cord in Eureka Powerline Bravo upright vacuum


... Vacuums

How do I replace the power cord? - Eureka 12 Amp Capture Vacuum Upright Vacuum


... Eureka 12 Amp Capture Vacuum Upright Vacuum

Eureka oxygen 6994A floor tool Part # 61264 is discontinued. What replacement part will fit?


... Vacuums

How to replace the cord rewind assembly on a AS1101 eureka vacuum


... Vacuums

How do I disassemble Electrolux oxygen? I need to adjust the cord re tractor.


... Electrolux Vacuums

How do you change power cord in eureka vacuum cleaner


... Eureka Vacuums

My electrolux oxygen canister cuts on and off. I have to open and close the vacuum, or take the base of the hose off and then re-insert. I have to do all these things before it will start up again. I sometimes shake the hose around, then it will come back on. If I try to dust with the dust brush (like a lamp shade or shelf) and the suction pulls against the object, the vacuum goes off for awhile. Sometimes I'll have to reset the vacuum by unplugging the electric cord. I never get to finis


Maybe you should have taken it back to that shop, it appartently isn't fixed. I would have replace that board, don't believe in modifing, you usually end up with other problems, like you have. One thing to check is maybe you have a partial clog in ... Vacuums

Eureka as1000 vacuum turned off suddenly while vacuuming, the cord seems to be torn through the plastic in some areas with revealed wire, dont know if that is related


... Vacuums

Cord doesn't rewind - Eureka AirSpeed Rewind Cyclonic Bagless Upright


... Eureka AirSpeed Rewind Cyclonic Bagless Upright
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0355 seconds