Having problems with your Eureka Smartvac 4870 Bagged Upright Vacuum ?

How do I replace the pedal release on the Eureka 4870?


Answers :

You cannot, it is all plastic and wears...use a small srew and tap it to body so it catches on plastic tab that is worn
Repair Help & Product Troubleshooting for Eureka Smartvac 4870 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to replace handle release pedal on eureka envirovac model3041


... Vacuums

The handle release pedal broke on my Eureka Smartvac. The spring is still in tact. I have a replacement pedal, but cannot figure out how to install it. Any suggestions?


... Eureka Smartvac 4870 Bagged Upright Vacuum

How to replace Eureka Model 4870 Handle Release Pedal?


... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

How do I replace the pedal release on the Eureka 4870?


You cannot, it is all plastic and wears...use a small srew and tap it to body so it catches on plastic tab that is worn ... Eureka Smartvac 4870 Bagged Upright Vacuum

How do you replace the handle release pedal - Eureka Smartvac 4870 Bagged Upright Vacuum


The handle release is just snapped into the bottom base. To take it out you will need to take a flat screw driver and pry the old one out. Then take the new one and pop it into place. ... Eureka Smartvac 4870 Bagged Upright Vacuum

How to replace handle release pedal on dirt devil kinetix self propelled vacuum cleaner. I need to remove the broken pedal and replace it with the new one.


... Dirt Devil Reaction Twin Cyclone Upright Vacuum

The handle release pedal wasn't allowing the handle to lower. I took off the pedal and saw the spring load part was broken. What is this part and how to replace it? Bissell 3760-3 handle release


Our vacuum recently had an issue with it's motor, we had to borrow a neighbors a couple times while we were trying to figure out what to do. We decided to take it to a place that specializes in cleaning supplies and cleaning tools to see if they had ... Vacuums

How to replace handle release pedal on dirt devil kinetix self propelled vacuum cleaner. I need to remove the broken pedal and replace it with the new one.


... Dirt Devil Reaction Twin Cyclone Upright Vacuum

Hoover Handle Release Pedal Replacement--How is it possible?


If you look at the picture, the slots are right across from the drive wheels, you can see the slots in the picture. Use a flat blade screwdriver. ... Vacuums

Kenmore 31913 Foot pedal release lever broken-need to replace


FixYa techs - thank you for your response but I solved the problems. It took me 2 hours of continual searching but I finally found the parts - listed under the tab sew machines of all things!? There is one pedal in stock and I called t ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

I am replacing a foot pedal on an upright Sharp vacuum cleaner-EC-TU2607. I have the broken foot pedal removed from vacuum cleaner proper but it is the removal of the broken pedal from its spring load that has me puzzled. I applied some pulling effort on the pin that holds the spring in place but there doesn't seem to be any give. Is that the correct approach or is there something else that one should be doing first to release some of the resistance by the pin or spring? Thanks!


... Sharp Twin Energy EC-TU2607 Vacuum

Replace handle release pedal on a vax power 6


Http://support.vax.co.uk/power-2-upright ... Vacuums

How to replace pedal release on bissell 6584


... Bissell Vacuums

How do i replace pedal on Eureka vacuum cleaner


... Eureka Smart 4870DT Bagged Upright Vacuum

How do you replace Hoover Handle Release Pedal on


The handle pedal is snapped in to the base, where it pivots.\015\012The pedal needs to be pried away fron the base, exposing the pivot pin to release it for removal. On your model, you will likelly have to remove the lower handle from the base ... Hoover Vacuums

Replace handle release buttom Eureka 4870 - Eureka Smartvac 4870 Bagged Upright Vacuum


... Eureka Smartvac 4870 Bagged Upright Vacuum

The handle release lever (Part N. 38434-021) on my Hoover WindTunnel upright vacuum (uses Y bags) broke. How do I install the replacement release lever (pedal) that I purchased?


You can buy Hoover Handle Release Lever 38434-021 at \015\012http://partsreadyonline.com/item.php?ItemID=798 ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

VACUUM REPAIR I have a Hoover Savvy upright, windtunnel, bag/bagless vacuum (model U8150-900). The Handle Release Foot Pedal - Part #38434026 broke soon after purchase but I finally found a source to replace this item. The problem is that now that I have the repair part I cannot figure out how to remove the old pedal and install the new one. The housing appears to be one piece of solid plastic. Any ideas, PLEASE! Peter


There are 2 tabs that stick out on the release, they fit in slots, so from the top look down and you can see them, using a flatblade screwdriver that will fit in there, push the side in to release it, which isn't easy, but it can be done. When you g ... Vacuums

Handle release pedal replacement on Dirt Devil Reaction vacuum


... Dirt Devil Reaction Twin Cyclone Upright Vacuum

How do I replace the release pedal on Hoover Windtunnel myself?


... Hoover Windtunnel Vacuum Release Pedal 38434023

How to replace Handle Release Pedal


In my Model 4870GZ, the foot pedal came out repeatedly with great aggravation. I discovered that this is due to small, broken, inadequate, and poorly designed plastic tabs in the clear plastic housing which were intended to provide a press-fit for t ... Eureka Smartvac 4870 Bagged Upright Vacuum

How do you replace Bissell Power Force upright release pedal


... Bissell Vacuums

How to replace a handle release pedal on a bissell cleanview


... Bissell Vacuums

HOW DO YOU REPLACE THE RELEASE PEDAL ON BISSEL 3920


... Bissell 3920 Bagless Upright Vacuum

Handle Release Pedal is broken on my Bissell Cleanview 82h1 - can order a new on and replace it?


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0531 seconds