Having problems with your Eureka Smartvac 4870 Bagged Upright Vacuum ?

Eureka the boss vac is spitting out dust -i checked the bag -no help

\015 It picks up dust but also spits it out from behind the vacuum\015

Answers :

Repair Help & Product Troubleshooting for Eureka Smartvac 4870 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Eureka the boss vac is spitting out dust -i checked the bag -no help

... Eureka Smartvac 4870 Bagged Upright Vacuum

Weird noise i have a eureka the boss and i am getting a weird noise figured bag was full needed to change it so i did. Noise persisted so i checked make sure nothing was caught in the brushes. I even checked the belt it was fine replaced with a new one.Still the noise is there help me I am out of what else to check.

Squealing ... Vacuums

We just moved in - the house is about 9 years old. I have a Eureka Mega Boss central vac - looks like model # is CV20220. 12.4 amps, 120 volts. Can't figure out what type of bags I need. Can you help?

Well, for this unit you will need any of the following bags, Eureka genuine Part# 90610Eureka replacement (Central vac bag) another genuine bag style called CV-1, and/or CV-2Kenmore Central vac bagsMost of th ... Vacuums

I have a Miele Vacuum cleaner MedicAir 5000 Plus. Recently the Dust Bag Indicator bar is full during normal cleaning and consequently the suction power is much less. I replaced the dust bag, engine pre-filter and Hepa filter but no change. When i remove the hose, the Indicator is normal, but when i attach the hose, wand, head, the indicator is full. I checked the hose, wand, head but can't see any blockage and when i blow with my mouth it seems fine. Can anybody help? thanks!

... Miele Vacuums

Eureka the boss smart vac doesn't pick up and spits back dirt

... Eureka Smartvac 4870 Bagged Upright Vacuum

What causes my eureka boss vac to smell bad - Eureka Smartvac 4870 Bagged Upright Vacuum

Clean it out with lemom juice ... Eureka Smartvac 4870 Bagged Upright Vacuum

Vaccum is spewing dust when I try to use it - Eureka Boss 7601 Bagged Upright Vacuum

It sounds like the motor is coated with find dust that has collected on it for months. The motor needs to be serviced and cleaned in the process. ... Eureka Boss 7601 Bagged Upright Vacuum

Dirt smell I seem to have a smell of dust when I vac. I have changed the bag and checked all areas where dirt collects and nothing is plugged. Seems to be puffing out from bottom and behind the unit

Orecks do have a lot of leaks in the airdut system of their machines. Most likely the smell however, is coming from the outer bag itself. That get so coated with fine dust that eventually it will start to smell like dust. Only by replacing the out ... Oreck XL Ultra Bagged Upright Vacuum

I replaced the belt in our Eureka Boss Smart Vac, it still seems loose, it uses a type R belt. The beater belt still doesn't seem to turn properly and seems that it doesn't pick up very well when I use it on my berber carpet. We have 2 dogs and I like to use it frequently. I have changed the bags and belt......

Check to see that the beater brush is not frozen up. Pull the brush and clean it, spraying some WD40 on each end piece that holds the brush in place.\015\012Also be sure the belt is properly installed so that the brush turns in the correct direction ... Eureka Vacuums

Oreck xl commercial spits out dust on bare floor but work on carpet. It is about 15 years old. Bag has been changed. Brushes are spinning so belt is working. Started about 2 weeks ago. HELP!

It might be that the beater brush is spinning when you tip it up to look at it but slight pressure of it contacting the floor is enough to stop it.\015\012If it were my machine I would remove the beater brush and clean it as best I could, paying part ... Oreck XL Ultra Bagged Upright Vacuum

No suction on my eureka boss smart vac. The belt is fine and the roller moves. I just changed the bag but no dice. any insight?

I know this is an old question but this is a good vac and maybe I can\012 help somebody else some day, wish I'd figured this out a couple months \012ago when this problem first started. :} Anywho, \012this is another option from an amateur; I don't ... Eureka Smartvac 4870 Bagged Upright Vacuum

My son used it to vacuum up needles from Xmas tree. It is now spitting out dust and not picking up. I changed the bag but does not help

I could not find the manual for the vacuum. I went to the Oreck site and found an online manual for my machine. I was able to take the hose apart and clean out the blockage. Also when I turned the base upside down and rotated the roller, I was abl ... Oreck XL2000 Bagged Upright Vacuum

I have the eureka boss smart vac upright and was cleaning a very dirty room and the power went off...the bag was full ...is this common or a big problem

Could be a automatic shut off to avoid damage..\015\012\015\012Change the bag and be sure there is no clogs..\015\012\015\012Have a great day ! ... Eureka Vacuums

Eureka Boss smart vac. Brush bar stops when comes in contact with carpet. I checked the tension spring and it is intact. Any other suggestions?

Generally when this happens either the belt is stretched or the brush bar is simply worn out and down were the area the belt rotates on ... Vacuums

I had a real heck of a time with the bag installation, because after the pop i zipped it up and started to use it and then the bag of the vac, not the replaceable bag fell off and i kept putting it back on but it kept falling off and when i looked inside the bag to reattach it to the vac cleaner i noticed that the dust was all inside. i haven't even used it that much as i keep it to do the upstairs bedroom only. i love that it is so lightweight and easy to use and i hope that someone can co

Mary, I have some wonderful news for you and your Oreck XL2600 Vacuum, I called 1 800 989 3535 customer service and inquired about your bag attach problem, it seems to be a docking station problem that "may" be warranteed, however if it is missing ... Oreck XL2600 Vacuum

Getting a Eureka central vac cloth bag back in after cleaning

I found that if you start by making sure that the tab that you pull to remove the filter is in a spot where you can reach it next time you need to remove it. Next, put the filter in over the inlet spoutand push it up to the white "stops" then gently ... Vacuums

What bag fits the 7618 eureka boss lite - Eureka 7618 Bagged Upright Vacuum

It takes the Eureka Style U Bag ... Eureka 7618 Bagged Upright Vacuum

Faithful Sebo X1 upright, about 12 years old, stopped working today. I replaced old with new dust bag, checked all dust paths were clear, checked main brush was clear/clean, and drive spindle rotated OK with fingers. When power switched on, the two red indicators briefly flash on then off, but nothing more happens, motor does not start - even with power reaching machine. Tried removing all consumables, refitting and turning on a few times to reset, no joy. Removed base cover, both belts were i

At 12 years, this vacuum has had a good long life. I suspect the motor is shot, but it could be due to faulty wiring and connections. A bad switch, break in the power cord, and worn brushes in the motor are other causes.\015\012I recommend ta ... Sebo Automatic X1 Bagged Upright Vacuum

How to change bag on eureka boss lite - Eureka 7618 Bagged Upright Vacuum

... Eureka 7618 Bagged Upright Vacuum

Clogged hose on Eureka boss - Eureka Boss 7601 Bagged Upright Vacuum

... Eureka Boss 7601 Bagged Upright Vacuum

How to replace belt on a eureka boss vacuum - Eureka 4870SZX BOSS SMARTVAC PET LOVER Bagged Upright Vacuum

If you look on the base plate you should see a diagram of how to do it,but if yours don't have a diagram then remove the screws from the base plate it should be three or four they have arrows next to them. take the base plate off and remove the brush ... Eureka 4870SZX BOSS SMARTVAC PET LOVER Bagged Upright Vacuum

Kenmore canister model 116.25513506 wont turn on. when handle switch is turned to floor. vac motor does not turn on. When switch is turned to carpet, floor nozzle works but vac motor does not. I checked fuse, all o.k. checked continuity for plug, o.k. removed wires for bag full switch...motor wont run. I wired motor directly power cord...motor runs. Thinking it must be the circuit board, how do I bypass it or test it?

... Vacuums

No power to sensor SR 12. I also have cleaned rollers and filters and bags. I have reset the handle. When I hit the power the check brush and full bag lights flash once. That is the only power that is getting through.The unit was in storage for a bit and got wet but its been drying off for a couple months. Is there something I can check or replace. Its a great Vac.

... Windsor SR12 Sensor Bagged Upright Vacuum

Eureka the boss pro 2272 type av bags - Eureka 5849A Boss Bagless Upright Cyclonic Vacuum

... Eureka 5849A Boss Bagless Upright Cyclonic Vacuum

Eureka Boss 2270 hose clogged - Eureka Boss 7601 Bagged Upright Vacuum

... Eureka Boss 7601 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1096 seconds