Having problems with your Eureka Smartvac 4870 Bagged Upright Vacuum ?

Clutch on eureka smart vac

\015 Keep breaking new belts on Eureka Smart vac. Needs clutch replaced.\012Can you help??\015

Answers :

Repair Help & Product Troubleshooting for Eureka Smartvac 4870 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Clutch on eureka smart vac


... Eureka Smartvac 4870 Bagged Upright Vacuum

I have a Eureka Boss Smart Vac. The vacuum doesn't pick up well


... Eureka Smart 4870DT Bagged Upright Vacuum

I have a Eureka 'The Boss Smart Vac'. The beater


Yes, you need to replace the belt. You should actually change this belt every year. Here is a link to the belt you need and the manual which has instructions: ... Eureka Smartvac 4870 Bagged Upright Vacuum

Eureka Boss Smart Vac 4870 evidentally overheated. Allowed unit to cool and observed a spark/smoke at outlet when it was replugged into the power outlet. Unit will not power up now. Circuit breakers in the home are fine. Is there a fuse that can be replaced in the unit? Does the unit need to be serviced? Is there a Eureka Authorized Service Center in Orlando, Florida?


Seems Eureka is putting faulty, insufficient wiring in many models, most especially my model (if you do a search of this site, you will be how many people have experienced fried wires and switches). There should be a class-action lawsuit in my opini ... Vacuums

How do I replace belt on Eureka smart vac? - Eureka Smartvac 4870 Bagged Upright Vacuum


... Eureka Smartvac 4870 Bagged Upright Vacuum

My Eureka Smart vac 4870PZ will not power on


Of sprayZegna colone bottle has a sticky black band around the bottle ... Vacuums

I have the eureka boss smart vac upright and was cleaning a very dirty room and the power went off...the bag was full ...is this common or a big problem


Could be a automatic shut off to avoid damage..\015\012\015\012Change the bag and be sure there is no clogs..\015\012\015\012Have a great day ! ... Eureka Vacuums

My Eureka smart vac 4469 is has no suction & is blowing air..I changed the bag & filter already..any suggestions?


... Eureka Whirlwind 4481 Upright Vacuum

Schematic for eureka, the boss smart vac, 12 amp


... Electrolux Eureka Boss SmartVac Vacuum Cleaner 4870PZ

No suction on my eureka boss smart vac. The belt is fine and the roller moves. I just changed the bag but no dice. any insight?


I know this is an old question but this is a good vac and maybe I can\012 help somebody else some day, wish I'd figured this out a couple months \012ago when this problem first started. :} Anywho, \012this is another option from an amateur; I don't ... Eureka Smartvac 4870 Bagged Upright Vacuum

Eureka smart vac 4476 - Vacuums


... Vacuums

Eureka the boss smart vac doesn't pick up and spits back dirt


... Eureka Smartvac 4870 Bagged Upright Vacuum

Eureka Boss Smart Vac won't lock in upright position.


... Eureka Smartvac 4870 Bagged Upright Vacuum

Eureka The Boss Smart Vac, beater bar stops turning when you use it on carpet


It is a simple fix that you need. Your belt needs to be replaced. After a period of time, the belt stretches to the point where it is still strong enough to spin the brush when you have the machine upside down to look at it, but when you put the mac ... Eureka Vacuums

How to change vacuum belt on Eureka the boss smart vac


... Eureka Vacuums

Eureka Smart Vac Brush not rotating when touching floor


Sounds like either the belt wasn't routed correctly or the idler clamp asm.(part # 704194CSV) has a problem. There should be a diagram showing the belt placement either by the belt or on the inside of the cover. ... Vacuums

Eureka Boss smart vac. Brush bar stops when comes in contact with carpet. I checked the tension spring and it is intact. Any other suggestions?


Generally when this happens either the belt is stretched or the brush bar is simply worn out and down were the area the belt rotates on ... Vacuums

I have the Eureka 4870 "The Boss" Smart Vac. The beater bar began to turn constantly and can't be shut by moving the Brush Roll Contol to Bare Floor position or the machine to the upright postion. It has also eaten two new belts. A local tech says he has seen this problem whereby the free-wheel assembly that makes contact with the belt to engage the beater bar is misalgned and cannot disengage. It is usually the chassis which would mean replacement of enough parts that would not be worthwhile


... Eureka Smartvac 4870 Bagged Upright Vacuum

HI, need bags and belt for eureka smart vac 6865


The chaepest places are target, wal-mart,k-mart,etc.... ... Eureka Smartvac 6865E Vacuum

I have a eureka the boss smart vac petlover vacuum and I cannot find the book on how to replace the belt. I have opened it up, but there is a silver roller that is confusing me.


Either go directly to the Eureka internet site, or GOOGLE "eureka boss smart pet lover manual". Several options should be displayed to download the needed manual. ... Vacuums

Eureka boss smart vac 4870 upright-How to replace on/off switch


This just happened for the second time with our 4870. It about $8 part with shipping (total of $12) from 24x7 vaccum. Pretty easy to change out. ... Eureka Smartvac 4870 Bagged Upright Vacuum

Eureka the Boss Smart Vac. Hose has suction, but still isn't picking up. Weird.


Your belt is probably broken. Check your belt and make sure your brushroll has not seized. If both of those check out ok, (because the smartvac belt doesn't stretch,) the belt tensioner assembly may have gone bad. \015\012\015\012-R ... Eureka Vacuums

I replaced the belt in our Eureka Boss Smart Vac, it still seems loose, it uses a type R belt. The beater belt still doesn't seem to turn properly and seems that it doesn't pick up very well when I use it on my berber carpet. We have 2 dogs and I like to use it frequently. I have changed the bags and belt......


Check to see that the beater brush is not frozen up. Pull the brush and clean it, spraying some WD40 on each end piece that holds the brush in place.\015\012Also be sure the belt is properly installed so that the brush turns in the correct direction ... Eureka Vacuums

Eureka Ultra Smart Vac bag overfilled, and it cut out


... Eureka Smartvac 4870 Bagged Upright Vacuum

Eureka smart vac roller won't turn because a piece of metal inside it pressing on the roller


... Eureka Smartvac 4870 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0296 seconds