Having problems with your Eureka Smartvac 4870 Bagged Upright Vacuum ?
Broken on/off switch
\015 How do I remove the cover so I can replace the on/off switch on my Eureka 4870 upright vacuum?\015
Had exactly the same problem with my upright Eureka Model 5893\015\012bagless. Eventually, the handle would get hot, and finally it just\015\012quit. When handle was disassembled, the wires were melted and it was\015\012toast. Ordered a switch after talking\015\012to several repair men. Talked to Eureka, too, and they were absolutely\015\012no help. Cheap wiring and switch made in China. Good luck trying to\015\012find a switch. vacuum-depot.com has switches, so you might try there,\015\012but make sure you get the 3-prong switch (same switch used on Eureka's\015\012Genesis). It is Part #27871.
I have the same vacuum and the on/off switch wasn't working any longer so I took the cover off to find out that the wiring got so hot that it melted through the wire coating and plastic frame.
Repair Help & Product Troubleshooting for Eureka Smartvac 4870 Bagged Upright Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
On-off switch My problem is finding a source for an on-off switch for an electrolux vacuum sweeper model 2100. I have replaced the broken toggle and now the sweeper turns on but only as long as the outside button is depressed. It appears that the on-off switch itself is broken as the switch does not ''hold'' when the toggle is activated. It seems to return to it's ''off'' setting as soon as the toggle is released. What ''holds'' the switch in its ''on'' position? Does it depend only on the on-
Hi Hugh. The 2100 has a rocker switch under neath the button. it is probably broken, or the button has a worn detent spring. If you would like, I could send you a switch kit with the rocker, button, and detent spring enclosed for around 20 dollars ... Vacuums
Brushes stopped The brushes stopped turning while using the cleaner. I removed the brushes to see if the spindle was broken, it wasn't. I then removed the top plastic cover and checked the switch that engages the brushes; it didn't seem to be moving correctly. There's one spring on the switch - should there be two? Or do you think something has broken on the inside? Thanks for any help
Most likely the turbine is bad, it may just be clogged up, you can take it apart and clean it out real good. That may work, but it may not. Sometimes it is best to replace the turbine. ... Hoover F7431-900 SteamVac Vacuum
My Electrolux Epic 6500 SR will not turn off by pressing on the switch button. I took it apart and removed the switch assy. I can maunually turn it off & on by pressing the rocker arm on the switch assy. It appears that the problem is with the big blue operator button, not the switch assy itself. The button does not seem to press down enough to cause the rocker arm to switch. The button has a "U" shaped wire that presses on the rocker arm and it may have some broken plastic details at the b
WOW !!! Finally You are dead on, absolutely 100%.... good work!!!.Get only a genuine new switch button with spring from an AERUS Electrolux dealer and reinstall. Then carefully reassemble the entire body and wiring harness.Con ... Electrolux Epic 6500 Vacuum
Mrs Cleaner flex has pulled out how do I replace Electric supply wire to switch on handle has broken at switch. How do you remove switch to repair? tonysimmons
Hi\015\012\015\012\015\012\015\012\015\012\015\012\015\012 ... Dyson DC07 Bagless Upright Cyclonic Vacuum
How do you access the on/off switch on a Nilfisk King 505? Mine appears to have broken, and I am handy enough that I can replace or maybe fix it - If I can reach it! When I went to switch it on, it gave a very short (half second) turn-over of the motor, and then totally died.
Did it work? Should we suggest other options? ... Vacuums
I want to remove the power switch on a dc04 to repair a broken wore, how do i remove the switch?
Go to www.dysonmedic.com then scroll to the bottom of the page and click on DC04 cable change. You won't get better advice anywhere (and I've got no connection with dysonmedic). ... Vacuums
I have a Electrolux canister model L-E (circa 1986). Won't turn on. I think the foot switch is broken inside. Was working fine - turned it off then would not turn on BUT foot switch sounded different, kinda hollow sound. Perhaps I'm reaching but wortha a shot? Mary
I have one of these LE models also. Yes, the on/off button is broken. I have had to replace it twice on mine. My local vacuum repair shop suggested NOT to use your foot to operate this switch, but just press it on or off with your fingers. That will ... Electrolux UltraLux 2000 Bagged Canister Vacuum
My dyson slim vacuum doesn't switch from hose to floor mode. I thought the foot lever was broken. I realigned it but it doesn't switch now from floor mode to hose mode. I take out the hose and I can see the white part. I thought it should move as you go from upright to recline position of the handle.
The changeover valve is not activating - call the Dyson helpline - they'll set you up for a repair with a repair dealer in your area. ... Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow
The switch to my Riccar 1500p hose is broken for the 2nd time. I don't want to replace the entire hose again, where can i get the switch and leads?
Take the screws out to take the handle apart. Remove the switch and take it to your hardware or local vacuum to to get the correct replacement. ... Riccar 1500 Simplicity S24 And S20 Electric Suction Hose Assembly
On off switch broken on my henry hound vaccum cleaner, where can i get a new switch?
... Numatic HHR-200 Henry Hound Bagged Canister Vacuum
It seems the off/on switch is broken
Sounds like a Hoover, which you had given the model number. But there are 2 or 3 screws to remove the handle, then there are 4 screws in the tool compartment, open the filter door, then the tool comp. should pull out, the switch part # is40309 ... Vacuums
It seems the off/on switch is broken
Remove the tools from the front of the tool storage. You will find three screws recessed in there, two on the bottom and one at the top. Once removed, the tool compartment will slide out and the switch will be accessable. \015\012You should be ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum
Miele s314 red star-motor stopped working-on/off switch broken?
Most likely the problem is with the cord winder. This is the most common problem with Mieles. It is actually the most common problem with any vacuum with a cord winder. A Miele repair center should not change you to look at the vacuum and tell you ... Miele Vacuums
Model U6637-960 Hoover Wind Tunnel with a broken on-off switch.
... Hoover U6630-900 WindTunnel Bagless Upright Vacuum
Roller brush on/off switch on hoover windtunnel u6401-9rm broken
... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Oreck upright vacuum power switch broken
... Oreck Vacuums
Miele s7580 power switch broken on off button
... Miele S7580 Vacuum
On off switch is broken
... Electrolux Lux 5500 Canister Vacuum
Self propel switch is broken
Most large towns have repair and part supply stores for vacuum cleaners. You can order your new switch there. murf427 ... Hoover Vacuums
Shop.Vac model qpl650 rocker switch is broken
Broken on/off switch
Had exactly the same problem with my upright Eureka Model 5893\015\012bagless. Eventually, the handle would get hot, and finally it just\015\012quit. When handle was disassembled, the wires were melted and it was\015\012toast. Ordered a switch aft ... Eureka Smartvac 4870 Bagged Upright Vacuum
Broken Switch on Hoover Windtunnel U6474-900
Hi there SmartAlec from NelsonVacuums.com.au here. I have a U6445 but i suspect there is little difference. Mine has only 2 screws as well and it also was very stiff. After ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Suction centralux vacuum two years old doesn't have the volume air movement it once had. Unit will still quickly reach an extremely high head of suction so no broken pipes. ran napkins thru no blockage, overode filter safety switch ran with out filter no difference. just don't move air like it used to
Hi!!! clean motor blower blades ,they collect alot of duct and the air in chopped,Good luck.Clean blower fan blades.. ... Electrolux Centralux Vacuum
Broken on/off switch. Can see only these markings: 1 ENG CHG Where can I find it?
Www.repairclinic.com or www.hoover.com ... Hoover S3639 WindTunnel Bagged Canister Vacuum
My bissell cleaner is not picking up the solution and my my knob to switch it from carpets to tools is broken
Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum