Having problems with your Eureka Surfacemax 200 Bagless Upright Vacuum ?

Trying to change the belt - Eureka Surfacemax 200 Bagless Upright Vacuum


Answers :

Things you will need Vacuum belt \015\012
    \015\012
  • Screwdriver
\015\012
    \015\012
  1. \015\012

    Locate and purchase the correct belt for your Eureka vacuum cleaner from the local grocery or department store. Vacuum belts come in different sizes according to your model of vacuum. Check your owner's manual or the vacuum itself for your model number.

  2. \015\012
  3. \015\012 \015\012

    Turn your vacuum cleaner over so that the bottom of the unit is facing you. Remove the cover plate from the bottom by undoing the screws that are holding it in place with a screwdriver.

  4. \015\012
  5. \015\012 \015\012

    Locate the belt pulley rod near the back of the vacuum base coming out of the motor. With the vacuum cleaner base turned upside down and facing you, the motor and pulley rod should be up near the top of the base.

  6. \015\012
  7. \015\012 \015\012

    Slide the vacuum brush roller out of the slots at the bottom of the vacuum base and remove the old belt from the brush roller and pulley rod. With the brush roller off of the unit, clean the brush by removing any strings or cords wrapped around the tube.

  8. \015\012
  9. \015\012 \015\012

    Install the new belt by looping it over the belt pulley rod next to the motor and then looping around the end of the brush roller in the belt slot. Hold the brush roller and pull back on it to tighten the belt while you slide the roller back into the slots on the vacuum base.

  10. \015\012
  11. \015\012 \015\012

    Replace the base cover plate by snapping it back into place and securing it with screws. Turn vacuum back upright and turn it on to test the belt and verify the unit is working

Repair Help & Product Troubleshooting for Eureka Surfacemax 200 Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Trying to change the belt - Eureka Surfacemax 200 Bagless Upright Vacuum


Things you will need Vacuum belt \015\012\015\012Screwdriver ... Eureka Surfacemax 200 Bagless Upright Vacuum

How to change a belt on eureka vacuum 4903 f - Eureka Power Plus 4703D Bagless Upright Vacuum


... Eureka Power Plus 4703D Bagless Upright Vacuum

How to change belt on eureka capture - Eureka 2971AV EZ Kleen Bagless Upright Vacuum


... Eureka 2971AV EZ Kleen Bagless Upright Vacuum

How to change belt on eureka multicyclonic - Eureka 3276AZ Pet Lover Bagless Upright Vacuum


... Eureka 3276AZ Pet Lover Bagless Upright Vacuum

Change belt on eureka model 3271 - Eureka 3276AZ Pet Lover Bagless Upright Vacuum


... Eureka 3276AZ Pet Lover Bagless Upright Vacuum

Change belt on eurika optima vacuum - Eureka 431A Optima Bagless Upright Vacuum


This link is for the manual will give you instructionshttp://www.eureka.com/FileLibrary/d944cbc8479a49aeafd4f964eb4842df/77297.pdf ... Eureka 431A Optima Bagless Upright Vacuum

How do you change the belt on a eureka 3271 - Eureka 3276AZ Pet Lover Bagless Upright Vacuum


... Eureka 3276AZ Pet Lover Bagless Upright Vacuum

Belt change for eureka model 4773 - Eureka 2961AVZ Bagless Upright Vacuum


... Eureka 2961AVZ Bagless Upright Vacuum

How to change a belt on eureka 5883 - Eureka 3276AZ Pet Lover Bagless Upright Vacuum


... Eureka 3276AZ Pet Lover Bagless Upright Vacuum

How to change on belt on eureka model # 2991 - Eureka 2991AVZ Bagless Upright Cyclonic Vacuum


Here is the belt you need and a manual you can view which has instructioins:Eureka 2991AVZ Belt ... Eureka 2991AVZ Bagless Upright Cyclonic Vacuum

How do I change the belt on Eureka Pet Pal - Eureka 3276AZ Pet Lover Bagless Upright Vacuum


Unlike most vacuums, this one the screws are on the top of your base. There are two screws one on each side. When looking at the front of the vacuum right side screw is located above the s in 12amps and on the left side screw is located above the p i ... Eureka 3276AZ Pet Lover Bagless Upright Vacuum

Need to change belt. Need instructions. - Eureka 5859ASZ Bagless Upright Vacuum


... Eureka 5859ASZ Bagless Upright Vacuum

How to change the belt - Eureka 5849A Boss Bagless Upright Cyclonic Vacuum


... Eureka 5849A Boss Bagless Upright Cyclonic Vacuum

How to change belt - Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum


Go to this link and theres several videos about this vac to watch you can also download the manual.http://www.eureka.com/en-US/Customer-Service/Videos/ ... Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum

Need to change belt - Eureka 3276AZ Pet Lover Bagless Upright Vacuum


Click the link below for the manual it will give you step by step instructions how to change the belt,http://www.eureka.com/File ... Eureka 3276AZ Pet Lover Bagless Upright Vacuum

How do i change the belt - Eureka 2961AVZ Bagless Upright Vacuum


... Eureka 2961AVZ Bagless Upright Vacuum

How do I change the belt on my Eureka Optima Bagless upright vacuum?


You will need to remove the base of the vacuum at the brushes. There should be either 2 pull levers that will allow you access to the belt area that once you release these levers the complete base section comes off exposing the belt and the brushes. ... Eureka 431A Optima Bagless Upright Vacuum

Change belt on maxima 4704 - Eureka 4700A Maxima Bagless Upright Vacuum


If you don't see clips or screws the underneath (base), there may be be 2 screws on the top side that have to be removed. This will allow you to remove the bottom in order to replace belt. ... Eureka 4700A Maxima Bagless Upright Vacuum

Change belt - Eureka 3276AZ Pet Lover Bagless Upright Vacuum


... Eureka 3276AZ Pet Lover Bagless Upright Vacuum

How do I change the belt - Eureka 2961AVZ Bagless Upright Vacuum


Hello,Here is a link to download the owners guide for your machine. Instructions are on page 4.http://www.eureka.com/service/manuals/802 ... Eureka 2961AVZ Bagless Upright Vacuum

Eureka LightSpeed Upright Vacuum, Bagless, 4700D change belt


... Eureka 4700A Maxima Bagless Upright Vacuum

How do i change the belt - Eureka 2971AV EZ Kleen Bagless Upright Vacuum


There are 2 screws on the top of the base, behind the brushroll area, one to the rightand other left. Remove those screws and grasp the hood (cover) and pull it off. The belt is clearly visible. ... Eureka 2971AV EZ Kleen Bagless Upright Vacuum

How do I change the belt - Eureka 3276AZ Pet Lover Bagless Upright Vacuum


You need to flip it over and get access to the bottom of the machine. Then you need to remove screws that are holding the cover on. there may be little tiny arrows in the plastic pointing to the screws and if so you will know that these are the scre ... Eureka 3276AZ Pet Lover Bagless Upright Vacuum

How to change belt in eureka altima vacuum - Eureka Altima Upright Vacuum Model 2996AVS Vacuum


Here is the belt you need to replace and the manual which has instructions:Eureka Altima Belts ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

How to change belt on eureka vacuum 2996 - Eureka Altima Upright Vacuum Model 2996AVS Vacuum


The information you're looking for can be found on page 8 of the manual via this link: http://www.eureka.com/service/manuals/80244.pdf ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1557 seconds