Having problems with your Eureka Uno 2998AZ Bagless Upright Vacuum ?

Eureka Uno brush not spinning

\015 I have a Eureka Uno and I just realized the brush on the underneath isn't spinning. How can I fix it?\015

Answers :

There are 2 or 3 screws on the top to take out and the top cover will come off. Belt is #61120A U long life, brush roll if you need it is #62365-2. If the brushs look ok and the ends turn freely, then it is probably ok. The belt goes around the brush roll then up to the motor shaft.
You simply need to replace the belt. Here is a link to the belts you need for the Uno model:

Eureka Belts and Manual
Repair Help & Product Troubleshooting for Eureka Uno 2998AZ Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Eureka Uno brush not spinning


There are 2 or 3 screws on the top to take out and the top cover will come off. Belt is #61120A U long life, brush roll if you need it is #62365-2. If the brushs look ok and the ends turn freely, then it is probably ok. The belt goes around the br ... Eureka Uno 2998AZ Bagless Upright Vacuum

My eureka 5902 4D bagless uprights roller brush stopped spinning. The belt is ok. This model has a sliding switch for roller speed. The brush should spin when you release the handle via the foot release. Bad brush motor or is there a fuse involved?


The same thing happened to me about a year ago with this very model. \015\012The issue on mine was a small, copper-colored metal wheel that attaches to the end of the brush roller. You'll need to remove the top cover (there are several screws). ... Eureka Smartvac 4870 Bagged Upright Vacuum

Eureka uno spins but does not pick up lint


... Eureka Uno 2998AZ Bagless Upright Vacuum

Eureka Maxima Bagless brush not spinning in vacuum position


Belt doesnt have to be broken, check the metal arm on the vacuum, see if there is build up of old rubber from previous belts, clean the arm that spins the belt and double check to make sure u have the correct belt ... Eureka 4700A Maxima Bagless Upright Vacuum

Eureka 2999 dvz brush roll - Eureka Uno 2998AZ Bagless Upright Vacuum


... Eureka Uno 2998AZ Bagless Upright Vacuum

I have a Eureka The Boss Mini (Model # 442) vacuum cleaner. It is not working properly sometimes Today I did a cleaned the roller brush thoroughly and powered it on to see if it spins at all. It spins only in Carpet model, but stops sometimes. Please can you tell me what could be the problem?


... Electrolux Vacuums

Eureka multicyclonic brush roll not spinning - Eureka 3276AZ Pet Lover Bagless Upright Vacuum


... Eureka 3276AZ Pet Lover Bagless Upright Vacuum

Brush does not spin on my eureka as104 - Eureka Vacuums


... Eureka Vacuums

The brush is not spinning on my Eureka multicyclonic


... Eureka Vacuums

Eureka 4870: when using hose, brush still spins, vacuum gets hot and smells like it's burning.


... Eureka Smartvac 4870 Bagged Upright Vacuum

Eureka lightspeed 4700 model brush stopped spinning


... Vacuums

Eureka complete clean brush wont spin


... Eureka 955A Complete Clean Bagless Canister Vacuum Cleaner

Eureka Altima Bagless Upright Brush is not spinning


You probably just have a broken belt. The belt needs to be changed about every 6 months regardless. I believe yours takes a style EXT U(Extended life upright), or a regular Eureka "U" belt works fine too. ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

My brushes on my eureka UNO won't turn


... Eureka Uno 2998AZ Bagless Upright Vacuum

The carpet brush isn't spinning - Eureka 4467AV Upright Vacuum


Remove the bottom plate and replace the belt ... Eureka 4467AV Upright Vacuum

My eureka optima vacuum shuts off after 5 minutes of use, the brush still spins, but no suction. If I wait 30 minutes, it will work again, for 5 minutes.


... Eureka 431A Optima Bagless Upright Vacuum

Eureka Optima Pet Lover 439AZ brush roll will not spin


... Eureka Optima Pet Lover 439AZ Bagless Upright Vacuum

There is a metal post that spins and rotates the belt at the opposite side from the brush. the removable wheel that holds the belt onto the metal pin is missing. how can i buy that part? eureka whirlwind lightspeed #5844


Vacuum 24x7.com, they should have the parts ... Eureka WhirlWind Litespeed 5844 Upright Vacuum

I have a eureka pet paw upright vac and the brush bar is not spinning what is the problem. please help


Have you checked the belt, if this is not it get back to me. thanks, take care. ... Vacuums

Brush does not spin - Eureka Vacuums


Belt needs to be replaced, and you need to clean the bearings. ... Eureka Vacuums

I have looked online for this vacuum but could not find it. The closest one is the Eureka 8803 but the p/n on mine says 79307. I have totally disassemble this vacuum. There are no clogs anywhere. Motor spins by turning shaft. Belt is new and turns brush. It still has absolutely no suction.


... Eureka Boss Capture 8803AVZ Bagless Upright Vacuum

Smell/suction I have a Eureka Altima Model 2991 Type AVZ. I have suction when I use the power paw and attachments. I have all hoses clear. My brush is spinning and belt is not broken (I opened it up and checked), but I have no suction when I turn it on to vacuum my living room carpet. I also have a burning smell to go with it after about 30 seconds. I've never had a problem with this vacuum cleaner before.


Ours started smelling too, and it seems that the plastic end on the roller brush was melting. In process of finding rollerbrush for it now ... Eureka 2971AV EZ Kleen Bagless Upright Vacuum

My Eureka Altima vacuum the brush is not spinning. I took it apart and the belt is Not broke, but when I turn the vacuum on I can smell the motor overheating. I turned the machine off and unplugged it and then took it apart so I could see the underneath and plugged it back in and the belt still won't turn..can you help?


Hi, since you have detected the the smell of the overheating motor, then the motor is faulty which is why the belt is not turning. You should change th motor ASAP........... ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

The performance indicator light has come on on my Eureka capture plus. Last night a t-shirt got caught in the roller brush and now it won't spin.


... Eureka 12 Amp Capture Vacuum Upright Vacuum

I have a eureka 4351 and I think the belt is broken but I can't figure out how to access it to check. Roller brush doesn't spin though. Just need to get the silly thing apart.


... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0493 seconds