Having problems with your Eureka Vacuums ?

The brush roll on my Eureka Bagless The Boss 4 dimension cleaning vaccum itsn't working. How do I fix it?


Answers :

Take either the plate over the brush roll off, if it doesn't come off, then the top cover comes off, should be 2 or 3 screws on the top to remove. Then you can get to the belt and brush roll. Check the brush roll, make sure the ends turn freely, if not replace it. The belt is either broke or stretched to the point that it won't turn the roll, replace it.
Repair Help & Product Troubleshooting for Eureka Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The brush roll on my Eureka Bagless The Boss 4 dimension cleaning vaccum itsn't working. How do I fix it?


Take either the plate over the brush roll off, if it doesn't come off, then the top cover comes off, should be 2 or 3 screws on the top to remove. Then you can get to the belt and brush roll. Check the brush roll, make sure the ends turn freely, if ... Eureka Vacuums

My children cleaned our Eureka 4d boss bagless vacuum and threw the lid to the dust cup in the trash. How do i find a replacement lid? The vacuum does not work without it,


Check with a vac repair shop to see if they might have a used top. If not they should be able to order you one. You could call the customer service number located on the label of the vac located on the back or the bottom of your vac for assistance. ... Vacuums

Eureka boss 5893A brush roll does not work


You have to prss the pedal and lean it back the brush roll wil enguage ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

My daughter accidentally got a scarf partially stuck in our Eureka Boss, now the roller won't work. Is there anything I can do to fix it?


Hi,There are a couple of tabs on both sides of the top housing that need to\015\012 be unlocked by using a flat screw driver, then the top will come off. \015\012The u shaped collar on the tube will then give way to take the roller \015\ ... Eureka Smartvac 4870 Bagged Upright Vacuum

My Eureka the boss capture bagless works fine but extremely loud. Please help, my ears are ringing after I'm done!


Would sujest you change the brushbar and end cap bearingshttp://evacuumstore.com/s-1171-4700a-1.aspx ... Vacuums

What is the cause of the loud noise in my vaccum it's a eureka boss bagless


If it's a rattling type noise, its possibly something in the fan assembly, including a broken off piece of the fan.\015\012It could also be something loose near the roller brush, including a piece of the belt. ... Eureka 5856BVZ Boss Bagless Upright Cyclonic Vacuum

Eureka model 7605 type A - 'the boss' lite. would not power on yesterday. working perfectly before. i replaced full bag with clean bag this morning. still won't power on. is there a reset button, or anything else i can try? Thank You!


... Eureka Vacuums

Dirt devil bagless will not ****. i have ensured entire suction path is clear. motor sounds normal. belt/brush are working fine. filter is clean. can i fix this myself? cost only $50 new so i probably won't take it anywhere for service.


If it is completely clean, no strain on the motor, no clog, check the fan on the motor - Intact? ... or is the center pulled out of the fan? ... Dirt Devil M086700 Vision Bagless Upright Vacuum

I have a Eureka bagless, The Boss, there is a clog behind the top dirt catcher. I have cleaned every other tube, filter, clogs, etc.. I can't get my hand up into the main housing. Thank you so much! Sijai


Try using a straightened wire coat-hanger. You should be able to bend a small hook at the end of the wire, and then bend it to get to the clog. If you can get the clog to move a little, but can't get it all the way out, try putting the vacuum back ... Vacuums

Vaccum will not turn on - Eureka Boss Capture 8803AVZ Bagless Upright Vacuum


... Eureka Boss Capture 8803AVZ Bagless Upright Vacuum

Our vaccum cleaner does not clean up. - Eureka 4700A Maxima Bagless Upright Vacuum


If the floor unit is not picking up, check for a broken belt for the beater brush or for a frozen beater brush.\015\012Might be a good idea to remove the beater brush and clean it of any debris and squirt some WD40 on the two end pieces that hold the ... Eureka 4700A Maxima Bagless Upright Vacuum

Changeing belt how do you install a new belt? I have an Eureka, The Boss, bagless, upright. The brush is hardly rotating. I think it could be the belt but i cannot open the vacumm to check it. How can I fix this?


... Vacuums

My eureka optima upright bagless vaccum has VERY low suction using the floor part. the hose has excellent suction. i removed the little translucent door underneath and there were no blockages, i cleaned the brushroll thoroughly and that hasnt helped either. i know this probably isnt recommended but i turned it on to the floor setting with the brushroll off and stuck my fingers up the intake as far as i could, the suction was good further up but it just seems to stop down at the base. because i s


I will try and help here. Is the sole plate on the bottom of the vacuum complety on and there are no visible cracks along the seam where it meets the body? This is the usual cause for this. Onc you take of the plate to access the roller and brushes, ... Eureka 431A Optima Bagless Upright Vacuum

I have a Eureka The Boss Mini (Model # 442) vacuum cleaner. It is not working properly sometimes Today I did a cleaned the roller brush thoroughly and powered it on to see if it spins at all. It spins only in Carpet model, but stops sometimes. Please can you tell me what could be the problem?


... Electrolux Vacuums

Vaccum will not turn on - Eureka Boss Capture 8803AVZ Bagless Upright Vacuum


... Eureka Boss Capture 8803AVZ Bagless Upright Vacuum

I have a eureka altima bagless and it wont pick up dirt i clean it and everything it just wont work


The belt is probably worn, stretched or broken that is why it is not picking up. Here is\015\012a link to the owners manual which has instructions and a link to the\015\012belt you need. ... Eureka Capture Upright Vacuum Vacuum

EUREKA BAGLESS VACUUM CLEANER (THE BOSS) IS CLOGGED UP .


... Eureka 5849A Boss Bagless Upright Cyclonic Vacuum

Eureka Boss Capture - bagless upright - height adjustment knob


... Hoover U6446-900 WindTunnel Bagged Upright Vacuum

We have a Hover F7411-900 which runs great but for some reason the wash does not dispense the cleaning solution. It works fine on rinse but not on wash. We tried cleaning the round piece at the base of the cleaning solution but that did not fix the problem. How can you repair so that the wash will work.


That would be the wash silonod, the thing that makes the soap and water mix together in order to make the soap come out at the bottom were the brushes are. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Brush Roll belt stops turning durring vacuuming on WindTunnel self-propelled, v belt is a little loose with handle down. Tensioning roll is engaged OK, but fully at the end of its travel. Replaced belts flat and v, but still stops turning even on high carpet setting when vacuuming. Carpet setting and height adjustment appears to be working OK, roll is clean and turns easily when out. Also turns easily until it engages the carpet. Self propel function works just fine.


... Hoover U6485900 Bagged Upright Vacuum

Eureka Boss Capture - bagless upright - green


\015\012Eureka Boss Capture - bagless upright NOISE PROBLEM FIXXED!!!\015\012\015\012I had the same noise problem as everyone else here and found no solutions on the web. i took the thing apart a few different times to no avail. i read he ... Hoover U6446-900 WindTunnel Bagged Upright Vacuum

Eureka the boss pro 2272 type av bags - Eureka 5849A Boss Bagless Upright Cyclonic Vacuum


... Eureka 5849A Boss Bagless Upright Cyclonic Vacuum

Replace Filter on Eureka The Boss super Lite - Eureka Boss SuperLite Bagless Upright Vacuum, 405AVacuum


... Eureka Boss SuperLite Bagless Upright Vacuum, 405AVacuum

Vaccum is making a loud high pitched sound, doesn't work well through the hose or the floor piece and shuts its self off after about 5 minutes. I have cleaned the entire vacuum out several times but this problem persists. Usually after I clean it, it'll work for a couple months, not this time. Vacuum is only 2 years old, is this typical?


... Dirt Devil Featherlight Bagless Upright Vacuum

Eureka boss 4870 overheating - Eureka 5849A Boss Bagless Upright Cyclonic Vacuum


... Eureka 5849A Boss Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1485 seconds