Having problems with your Eureka Vacuums ?

Electrical connection to Eureka Powerhead.

\015 Eureka powerhead for central vac. At the powerhead end of the hose is a\015\012plastic handle. Inside this handle is the end of the hose with\015\012connections for the wires that turn on the central vac and powerhead\015\012brush. The connections are made via 4 metal rings that slip over the 4\015\012wires, each ring separated with a plastic ring. The end ring (nearest\015\012the end of the hose) will slide off of the wire with the slightest jar.\015\012How do I \342\200\234fix\342\200\235 this ring inplace, but not permanently (glue) incase\015\012future repair is needed? Thanks.\015

Answers :

Repair Help & Product Troubleshooting for Eureka Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Electrical connection to Eureka Powerhead.


... Eureka Vacuums

The power wand electrical connection on the power unit itself seems to be corroded. I think I need a new two wire plug to plug into the wand. the model is a Eureka 6984 A. I am able to disassemble the power unit if necessary and replace the wire and plug if one is available


Try hesco inc they have a on line store with all the vacs parts diagrams and fast shipping. ... Eureka Vacuums

Electrical cord electric cord connection to cannister boby on filter queen is fixed by a plastic grommet or connection - how does this go into place without breaking or forcing plastic part?


It has a **** shell like closure on the inside and can normally be popped out by squeezing with pliers. It will have a slightly oval appearance, you must squeeze it round and pull. ... Filter Queen Majestic Canister Vacuum

Hooked everything up per directions. I plugged it in to the closest electrical outlet and nothing happened. The lights did not light up, the connected wall control and sensors leds do not light up. It appears the unit doesn't have power. The electrical outlet socket is fine as everything else I plug into it works fine. I have tried every other electrical outlet available. The unit won't power on from any outlet, and all of those outlets run other things, like power tools an refrigerators


Dear Davehibshman,Firstly; dismantle the plug and replace the fuse with the same rating as the one you have just taken out. Replace the plug cover, put the plug into the socket and try again. If this doesnt work, there may be a problem wi ... Vacuums

INSTRUCTION MANUAL FOR EUREKA LIGHTSPEED 100 - Eureka 2 Type Dcf4-Dcf18 Upright Vacuum Cleaner Hepa Pleated Washable Filter W/activated Charcoal Whirlwind Mighty Mite Maxima Boss Power Plus Pet Pal Lightforce 300 Lightspeed 100 General Electric Ge 63073 4700 5500


... Eureka 2 Type Dcf4-Dcf18 Upright Vacuum Cleaner Hepa Pleated Washable Filter W/activated Charcoal Whirlwind Mighty Mite Maxima Boss Power Plus Pet Pal Lightforce 300 Lightspeed 100 General Electric Ge 63073 4700 5500

I have a Shark EP754C vacuum cleaner, the powerhead connector from the hose to thepowerhead (plastic) is broken. Is there any way to get a new powerhead or have this plasic connection fixed??


... Vacuums

The powerhead cuts in and out on power as you vacuum with the brushes. Works ok with suction only. Have replaced both wands and still cuts out, Can it be the powerhead connections? Help? TJZ


Had the same problem with mine check all the prongs on the 2 wands and on the power nozzle and on the handle itself you will probably see that one of them is discolored or burned looking you will need to replace that section, I had to replace one of ... Eureka 6984A Bagged Canister Vacuum

On a filter queen 360 vaccum the electrical connection from the hose to the wand was loose and over time the electrical arcing burned up the female conector piece. Is there any way I can replace this without having to buy a new hose! Where would I find this female conector piece.


I am having the same problem On a filter queen 360 vaccum the electrical connection from the hose to the wand was loose and over time the electrical arcing burned up the female conector piece. This sounds to me like a manufac ... Filter Queen Vacuums

My Rexel shredder isn't switching on when connected to the electricity. I've tried all the settings but the machine won't switch on. I've cleared the shredders, checked the bin is in correctly, tried different electric points.


... Vacuums

Reinstalling a hampton bay ceiling fan model-HL52QV P 3LC14 and I do not recall how to wire it to the house electric. A black wire and a blue wire are tied together and a white wire are present fromthe fan. Whichone is connected tothe hot wire in my fan electric box inthe ceiling.


The black and blue wire should conncect to the black wire in the electric box and the white wire should connect to the white wire in the box. This assumes the wiring was correctly installed.Jim ... Vacuums

I have to rewire the plug on a Pfaff Dorina 75 sewwing machine (foot pedal & electrical input. I cannot get it right - anyone can tell me what to connect to which of the three connections in the plug ?


The colour of the wires differ depending on where you are. If you're in the USA and using 120V system the wiring isBlack (the hot wire) goes to the brass connector, The White goes to the Silver connector and the green goes to the Earth connec ... Vacuums

When running the 2100 Electrolux vacuum, it is stopping and starting when pulling or pushing the floor attachment. Seems like the connection at the top of the handle is a little loose or the electric tabs are loose where the hose connects. Any ideas?


Other option is that on the hose end of the electrical connection, you can use an awl on the electrical connections to bend them in slightly so they make good contact when they are automatically plugged in when you connect the wands. HOWEVER, ONLY D ... Electrolux UltraLux 2000 Bagged Canister Vacuum

Miele vacuum Sometimes when I hit the auto roll up cord button or even move the cord, the power vacuum goes off. I move the cord again and it comes back on. I took it apart and looked at the connection from the cord to the auto roller. These are the electrical slip on type connections and are still in good shape. There are no bends in the cord. I air dusted everthing inside, put it together (with no extra parts!). Good news..it powered up so I did not break it, but it still has the same problem.


... Vacuums

The power brush floor rug attachment on my Eureka 6997 A Oxygen Canister Vacuum goes on an off as I use it. I replaced the The power cord from the handle has 2 plug in connections: 1 at the handle / upper wand 1 at the lower wand top of the power brush attachment I replaced the entire wand assembly and it worked great for a year or so and now it's doing the same thing again. I was told to keep the power switch on the handle set to off when connecting the power brush attachment or it will bu


This is from the prongs not making a good connection causing an arch inside the plugg causing what looks like rust on the plugg. I would try snugging up the connection by squeezing the female section to get a better connection on the prongs when it i ... Vacuums

I have sanyo sc-s700p vacuum and need the 2 connecting wands with electric connections where can I find parts


... Sanyo Vacuums

Vacuum powerhead model pb007 repair removing power supply socket from powerhead connection to suction shaft


... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

The wand that connects to the power head at the powerhead connection broke(sheared off) fine crack


Hello,\015\012\015\012Unfortunatley the Wand for your Miele is sold as an entirely assembly only. Miele does not sell pieces of this wand separately. In order to fix your wand you'll need to purchase a new wand assembly complete. ... Miele s558 Silver Moon Vacuum

I have a Z5930 vacuum and i want to trace an electrical fault. I need to disassemble it to get to the electrical connections and it is quite a tricky one to get in side. The machine will run and then cut out after a short time. It will then re-start in about 2-3 minutes and run normally again and so on. I was not able to give you the exact model but it is Ultra Filtration Oxygen line


... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

Model, 116.c85pbpk0v022 Power-Mate Jr. attachment stopped working, could it be a part within the unit (i.e. the electrical component) or do I need to replace the unit? How do I troubleshoot the electrical connection? No known drop or abuse. Worked last time I used it.


This model frequently stops because, lint, hair, etc. gets caught between the two end pieces of the brush cylinder. Do the following to fix it:1) Remove the two Philips screws from the underside of the unit. 2) The side with the tag will ... Kenmore Vacuums

I was trying to repair my wife's kitchenaid mixer and took part of it apart, including the back part, where the electrical connections are. The original problem was the plastic gear was damaged -- I finally had the good sense to find the solution for that problem on the internet and replaced the damaged part. But now the mixer just won't turn on. I don't think I damaged anything in the electrical section, but I suspect I either blew a fuse or somehow disconnected something.


Do you have a model number? Is the voltage getting to the motor from the switch? ... Vacuums

Eureka electric hose


... Eureka Powerline 6852 Canister Vacuum

How to access cord connection Eureka 3712 B cannister


This might be trial by ordeal---you may have to begin taking screws out until the unit separates where you can pull the case apart to get at it--note where screws go if different types etc. This unit is so old a service manual might not be ... Vacuums

Only electrical connection of the old vacuum cleaner Miele S204 de luxe electronic


... Vacuums

Poor electrical connection on Hoover


THE PRODUCT HAD TO GO TOGETHER...SO IT HAS TO COME APART!! KEEP LOOKING FOR MORE SCREWS..OR A LATCH TYPE SET UP. ONCE INSIDE, SECURE ALL LOOSE WIRING TO CONTACT SCREWS...OR? MAKE SUR PLASTIC CORD RETAINING COLLAR IS AROUND CORD, AND FASTENED PROPERLY ... Vacuums

Eureka 4337 BH vaccuum - when I connect attachments there is no


... Eureka 4337BTH Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0472 seconds