Having problems with your Eureka Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum ?

How do I replace the belt on my mom's Eureka Whirlwind litespeed 12 amp 15" ?


Answers :

Take the cover off from the bottom there should be clips or screws on the bottom.and work the old belt off and new one on
Repair Help & Product Troubleshooting for Eureka Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I replace the belt on my mom's Eureka Whirlwind litespeed 12 amp 15" ?


Take the cover off from the bottom there should be clips or screws on the bottom.and work the old belt off and new one on ... Eureka Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum

Replace brush roll belt - Eureka Whirlwind LiteSpeed 5843 Upright Vacuum


... Eureka Whirlwind LiteSpeed 5843 Upright Vacuum

Eureka whirlwind lite which belt? - Eureka Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum


... Eureka Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum

How do I replace the drive belt on a Eureka 12 amp True Hepa?


... Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum

Need to replace belt on 4773 eureka vacuum - Eureka 12 Amp Capture Vacuum Upright Vacuum


... Eureka 12 Amp Capture Vacuum Upright Vacuum

Broken belts I have had my vacumm for about 3 months and have had to replace the belt twice, is there anything i can do to make this stop? It is an Eureka True clean 12 amp multipath cyclonic system. it has the pet paw on it and the telescopic self cleaning duster. thanks


... Eureka 4467AV Upright Vacuum

How do I take the roller and belt off - Eureka WhirlWind Litespeed 5844 Upright Vacuum


Open bottom cover, and pull it off. ... Eureka WhirlWind Litespeed 5844 Upright Vacuum

What size belt does a eureka whirlwind litespeed 5841 take


... Vacuums

The vacuum roller won't turn but the belt is fine Eureka Whirlwind Litespeed


The belt may look fine but it's probably stretched out. Rubber belts are usually good for about 1 year. The tension of the belt is what allows it to turn under the strain of the carpet. Make sure the brushroll spins freely when held out of the machin ... Eureka Whirlwind Litespeed 5840 Bagless Upright Cyclonic Vacuum

How to replace the belt on a Eureka whirlwind 5190 vacumn


... Eureka Whirlwind 5190 Vacuum

What belt do I purchase for eureka whirlwind litespeed


Hello,\015\012\015\012If you have the exact model Eureka that this repair was listed under, model 4388 then please find a link to the belt you need below. If you'd like to verify the model number, please check the back or the bottom of ... Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum

HOW TO REPLACE BELTS - Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum


Here is a link to the belts you need and a manual you can view which has instructions: Eureka 4388 Belts ... Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum

Bought at walmart - don't carry the Eureka Boss Whirlwind now and I need replacement belts


Find a vacuum repair store in the yellow pages, these are common items so they will have them in stock. ... Eureka 2991AVZ Bagless Upright Cyclonic Vacuum

Eureka Whirlwind LiteSpeed 5843 manual - Eureka Whirlwind LiteSpeed 5843 Upright Vacuum


... Eureka Whirlwind LiteSpeed 5843 Upright Vacuum

I'm using (or WAS using) a Eureka ''the boss'' model 8803. The belt broke, no biggie, so I replaced it with a Eureka model U belt, the problem is when I put the new belt on and turn on the vaccuum, the belt breaks again. I am also having trouble getting the brush roller to fit right when the belt is in place. I can't find any sharp edges that would cut the belt,nor can I find where any small bits may have broken. Anyone have a solution for me?


First, make sure you have the right belt, second, i am thinking that you are not lineing the roller up right, it will only fit one way. look at the ends of the roller and the grooves where it slides in, you should be able to see clearly how it goes. ... Vacuums

My 4870 K Boss is 2 years old. I have replaced belts & filters in the specified intervals. This last time I replaced the belt after a year, it shredded 3 of them on the outside edge of the belt in about 5 minutes of use. I ordered a new brush roller & heavy duty belt which I installed. It began shredding the belt in less than 5 minutes of use. What is your suggestion? Is this a known problem with this model? Eureka says no and is not standing behind it.


The only reason why it would be shredding the belt is if the pulleys were not lined up correctly. Check the allignement of the belt to make sure there is nothing kepping the pulleys from being in line. The other thing that it could be is if the rolle ... Vacuums

I have a Eureka 4870GZ. It turns on, but the brush roller doesn't move. The belt looks fine. I do have an extra belt and would try replacing the old belt, but I can't get the old one off the motor shaft or the new one on. I called Eureka customer service. The lady said there's supposed to be a small space between the motor shaft and the outside edge of the vacuum where I can slip the old belt off and the new one on. I don't see it. It looks like the motor shaft goes into a recessed place in the


Remove the top cover so that you can access to belt, You'll find 2 rows of 4 decorative holes on the top cover, In two of the holes you'll find the screws, Please use a flash light to see in that., Once the screws are removed, you'll be able to ... Eureka Vacuums

What size belt does a eureka whirlwind take - Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum


Hi,\015\012\015\012Your Eureka Whirlwind 4388 takes Eureka Style "U" Belts, Part number 54312. \015\012\015\012Here's a direct link back to that belt on our website if you need to purchase one:\015\012 ... Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum

How do I change belt for Eureka Whirlwind Lite "Boss" model 450 A


Remove the 4 screws on the yellow top of the vacuum. The yellow plate will pop up exposing the belt and roller. ... Eureka Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum

Replace the belt on a Eureka contour model 2900 upright vaccum. I just want to see a picture of the way it comes apart. It a almost new and just needs the belt replaced.


I have listed below a link to the owners manual for your model and a link where you can purchase the belt you need. Hope it helps you!Eureka Contour 2900 ... Vacuums

I was replacing the belt on my Eureka Smartvac 4870 and one of the felt gaskets (or part of it) popped out. I thought I put it in correctly, but the first I used it after replacing the belt, the gasket got mangled by the brush. I'm wondering how important it is to get fixed; is it a part I can pick up anywhere and fix myself? Thanks for the help.


I'm no expert but if you mean the felt on the roller, you have to replace the roller (expensive,esp. for such a minor part). So. I found some felt with adhesive in the craft section at Wal-Mart, trimmed it to fit and done deal. Felt reduces friction. ... Eureka Smartvac 4870 Bagged Upright Vacuum

Replace belt on eureka big boss sweeper. Bought sweeper got it cheap and it needs a belt. So i don't have anything to go on to replace it. Seems like there is a pulley below and not sure how to install


... Eureka 5849A Boss Bagless Upright Cyclonic Vacuum

Smoking belt Hey I have a Eureka 2961 avz bagless vacuum, and if it's on for a few minutes i can smell the belt burning.  If the vacuum is left on any longer the belt starts smoking.  I took the case off and there was a little debris but not much.  Is there a cause and fix or just time to replace the belt?


Belt is slipping because the bearings on the beater brushes, which it turns, are jammed or full of dust. \015\012Alternatively the belt has stretched after being overheated and needs replacing because it now slips. ... Eureka 2961AVZ Bagless Upright Vacuum

I replaced the belt in our Eureka Boss Smart Vac, it still seems loose, it uses a type R belt. The beater belt still doesn't seem to turn properly and seems that it doesn't pick up very well when I use it on my berber carpet. We have 2 dogs and I like to use it frequently. I have changed the bags and belt......


Check to see that the beater brush is not frozen up. Pull the brush and clean it, spraying some WD40 on each end piece that holds the brush in place.\015\012Also be sure the belt is properly installed so that the brush turns in the correct direction ... Eureka Vacuums

Eureka whirlwinde litespeed vacuum - model 5841


Very simple under all three screws in the front (two on sides and one in back) once open--you can take off that panel...take brush out...take old belt out...put new belt on..around brush..place both inside...and make sure belt is around that little p ... Eureka WhirlWind Litespeed 5844 Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0801 seconds