Having problems with your Eureka Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum ?

Central vacuum won't turn on

\015 CentraLUX by Aerus - Model E130G 120 voltsWon't turn on. Checked outlet-is working.Worked fine until I emptied the canister and rinsed the blue filter. Put it back on damp but did not use vacuum for few days. Thought it would dry. Could that be the problem? Need advice fast-part in a few days and I need to vacuum : (\015

Answers :

Check your filter to make sure that it is seated completely in the unit. There is a switch at the top that the filter has to press before the unit will run. It is there to protect the unit from running without a filter. If you remove the filter, and look up into the unit, you will see it. It's a longish white plastic piece that you can depress by hand. Listen for the faint click while you are inserting the filter to be sure the filter is depressing the switch. Good luck!
Repair Help & Product Troubleshooting for Eureka Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kenmore central vacuum wont turn off at handle,

... Vacuums

Motor shaft wont turn on EL2050 - Electrolux Central Vacuum

Have you tried running the brush motor without a belt on it? Does it not spin without the belt? If so, you may have worn motor brushes (not too expensive parts, but make sure you order both brushes, or make sure they are sold as a set). If your motor ... Electrolux Central Vacuum

Wont turn off - runs constantly - Broan-NuTone CV353 Central Vacuum

It sounds to me that the relay has stuck contacts. Try tapping the relay with the HANDLE of a screwdriver if you can find it. BE SURE TO UNPLUG THE UNIT BEFORE YOU OPEN THE UNIT !! Most centrals now have circuit boards and not seperate parts like ea ... Broan-NuTone CV353 Central Vacuum

I was using my easy flow central vacuum, and shut it off. When I went to start it up again 5 min later, it would not turn on. I emptied out the filter, and reset the switch. When the reset button was pushed, it started up the vacuum, but the vacuum was not turned on in the house. It can only be turned on from in the garage and not on the actual hose. What is going on?

... Easy Flo EF2300 Central System Vacuum

I have a Eureka Upright vacuum (4800 Series). When I try to start it by turning the switch on, it wont. For few days, I was able to get around this problem by repeatedly turning the switch on and off until it turned on but that does not work any more. Could it be something related to the switch it self or the power cable. My wife mentioned that one of my kids might have pulled the power cable too hard (at the back of the vacuum). Any help to solve this problem will be very much appreciated. Tha

... Eureka Smartvac 4870 Bagged Upright Vacuum

Vacuum wont **** and turns off after 2 minutes of vacuuming

You must av some of the blanket still stuck in there that's why it keeps stopping because it's overheating check for more blockages ... LG Electronics Kompressor Pet Care Upright Vacuum Cleaner LUV200R

Hi. I borrowed my friend's Hoover VC340 to clean my house. I was vacuuming when i noticed the cannister was full, so I turned the vacuum off, pulled out the barrell, and followed the instructions on the barrell to empty it. I put it back into the machine, but it wont turn back on. I tried different power outlets, but to no avail. any thoughts?

... Vacuums

I have a central vacuum system. When I disconnect the hose from a wall outlet the central canister does not shut down dispite my turning off the vacuum at the handle of the hose. The only way I can get the system to shut down is to pull the plug at the canister. What gives? Rob

What I'm hearing is the canister(Not the Powerhead) portion of the unit is running all the time unless you unplug it. this problem could be caused by a short in one of your low voltage lines running through the house. To determine that just unplug on ... Vacuums

The vacuum comes on but the standup vacuum assessory won't turn on. I"ve pushed the reset button; unhooked everything, including reattaching the canister but it still wont' come on. Any other ideas? By the way, I hated the price, but it's the best vacuum I've ever had - especially when I have three shedding pets!

Check the roller brush to see if anything is wrapped around it. If not, there may be a loose connection or wire between the canister and the power nozzle. I assume that's the accessory you're referring to. I could also be a defective switch, but loo ... Vacuums

My Eureka Altima Upright Vacuum Model 2996AVS Vacuum wont turn on. Any advice where to start? I would think it may be a fuse but do not know where it is on this vacuum.

Generally, on something with a cord and plug, the first thing I suspect is a bad spot in the cord where it connects to the plug. One way to check it is to turn the vacuum on, plug the plug into a good outlet that you have checked to make sure it wor ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

My Eureka Altima Upright Vacuum Model 2996AVS Vacuum wont turn on. Any advice where to start? I would think it may be a fuse but do not know where it is on this vacuum.

... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Burning smell, vacuum wont turn on now

The front of the machine ( the peice that holds the brush roller ) and the bag unit are part of a safety system that will only let it turn on if both are locked firmly in place, after checking that examine the cord, look for any burn marks especially ... Kirby Ultimate G Bagged Upright Vacuum

Dirt devil 990 central vacuume won't turn on

... Dirt Devil Vacuums

My vacuum wont turn on.

It sounds like you may have a faulty on/off switch. I suggest if you are not familiar with electricity please have someone that you know "is" to do the following. "UNPLUG" your vacuum and disconnect thee white wire coming out of the on/off switch. Wi ... Bissell 3576 CleanView II Bagless Upright Vacuum

I ran over a shoe string. Turned the vacuum off and pulled it out. Now the wheel wont turn and it isnt sucking up the dirt.

... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Light says its charging but it wont turn on - Dirt Devil KONE Hand Vacuum MO213BLU Vacuum

Hi there,\012\012\012Well first of all you may check that the charger (adapter) is working or not, you may use a volt meter to check it out or use another charger to make sure....... further you may follow the step below -1. Remove ... Dirt Devil KONE Hand Vacuum MO213BLU Vacuum

Brush wont turn..Pressed reset still no turn - Vacuums

If the motor runs and the brush doesn't turn, the first and best suspect is the belt. ... Vacuums

Vacuum brush roller wont turn - Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

You dont say if you checked if the belt is still whole so my guess is the belt broke(it could've fallen off and not be there at all but you definately need a belt) check that and let us know ... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

Central Vacuum works when power switch on canister is turned on, but will not turn on when connecting the hose.

DOes it not work on any of your wall inlet valves? If all wall inlets appear dead take a coin making a connection with both of the contacts inside the throat of the valve. If the vacuum turns on the problem is in your hose or the powerhead. If nothi ... Kenmore Vacuums

I have a Bissell powergroom vacuum cleaner and i sucked water into it and now it wont even turn on what could be wrong with it??? It was a very expensive vacuum and i dont want it to be thrown out

... Vacuums

I have a DC14. About a wk ago it was making loud sound and bar stopped turning. i unclogged everything....now the suction works great. However, the bar still wont turn. The belt inside is still intact and isnt loose. Several solutions suggested resetting the "Red" button...i have searched the vacuum over and over. there is NO red or any other color reset button. The bar is set down perfectly in there, the cover plate is installed properly. What other problems could there be? Or do i just need to

... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I have a central vac. and the beater bar, for the carpet is not turning. the vacuum still sucks but the beater bar doesn't turn. I checked the belt it is fine.

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=818384\015\012Generic problem for all Vacuums\015\012I have a central vac.\015\012Posted by bmiller874 ... Vacuums

Hoover vacuum turned off and wont go back on - Vacuums

Generic problem for all Vacuums\015\012Hoover vacuum turned off and\015\012Hoover vacuum turned off and won’t go back on\015\012 ... Vacuums

Central vac won't turn off unless we unplug - Broan-NuTone CV350 Central Vacuum

Some units have an on/off switch on the power unit itself. Check to make sure that is not turned on. Unplug your power unit and remove the 2 low voltage wires (not the power cord itself) . The low voltage wires start at the unit and run throught your ... Broan-NuTone CV350 Central Vacuum

I was vacuuming then all of a sudden the vac turned off and wont go back on. i thought the bag might be full so i emptied it and still it wont go back on

Greetings from GoVacuum.com,There maybe several things wrong with the vacuum at this point. When a vacuum cleaner doesn't turn on, it usually is 1 of several things. It's either a reset button on the machine, the cord, the plug, the sw ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5262 seconds