Having problems with your Euro-Pro NV31 Infinity Vacuum ?

Need new brush ( power beater bar) and belts - Euro-Pro NV31 Infinity Vacuum


Answers :

Hello,

You're in luck! We carry both the belts, as well as the roller brush for your Shark Infinity model that you listed this repair under.

Here are links to both parts you are requesting:
Euro-Pro Shark Infinity NV30, NV31 Bagless Upright Roller Brush Assembly\015\012

Belt Set For Shark Infinity Bagless Uprights, Models NV30, NV31

After you receive the parts, here's a link to the manual that will walk you through, step by step on how to replace both items if you have any questions, or need help:

Shark Infinity Bagless Upright Owners Manual


Hopefully this was able to answer your questions. Please feel free to reply to this email or just give me a call if you have any further questions. If this helped, please be so kind and rate the repair, or leave some feedback for me.

Chris Jones
GoVacuum.com
Repair Help & Product Troubleshooting for Euro-Pro NV31 Infinity Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need new brush ( power beater bar) and belts - Euro-Pro NV31 Infinity Vacuum


Hello,You're in luck! We carry both the belts, as well as the roller brush for your Shark Infinity model that you listed this repair under.Here are links to both parts you are requesting: ... Euro-Pro NV31 Infinity Vacuum

Power cord replacement - Euro-Pro NV31 Infinity Vacuum


... Euro-Pro NV31 Infinity Vacuum

We ordered parts for our Infinity pet pro vacuum : model NVC33C March-3-2011. We ordered a replacement roller brush and new drive belt. Our credit card shows the payment of $46.85 has gone through on March-9-2011. Our understanding of the shipping time was two to three weeks. Any information would be helpful. Thanks John Jamieson 12461 202 street Maple Ridge BC Canada v2x4t5


Hi,You'll have to contact the place you ordered the parts from. We are a DIY fix it yourself site.Handie andie ... Euro-Pro NV31 Infinity Vacuum

I have a Euro Pro canister EP754 vacuum that runs HOWEVER the main floor attatchment brushes wont turn. Does this require a new belt? And where is it located?


... Euro-Pro Canister EP754 Bagged Vacuum

Where is the belt located? - Euro-Pro NV31 Infinity Vacuum


See the schamtic below:God bless you ... Euro-Pro NV31 Infinity Vacuum

I have a Eureka 4800 series the Boss upright with a bag and Hepa filter. I love it! I was just vacuuming with the hose part and all was well and then suddenly the lower brush came on and a "burning" smell followed. Thought it was the belt so my husband was going to put on the new belt which I had on hand! When he turned it over, the "bar" that holds the belt looks as though it "shot through" the plastic side of the housing on the vacuum. There is melted plastic on the outside of the vacuum and o


I had the same problem. Take out the old belt if possible. Remove the 4 screws inside the filter and the 3 on the front of that housing. pull out the foam around the motor. carefully pull out the suction tube that is press fit against the motor. ... Eureka 4874 Bagged Upright Vacuum

How to repair BEAM Central Vacuum Power Brush. Motor works perfectly, belt brand new but unable to spin brush.


... Vacuums

Shark infinity nv31 replacement canister - Euro-Pro NV31 Infinity Vacuum


... Euro-Pro NV31 Infinity Vacuum

Infinity shark vacuum black washer - Euro-Pro NV31 Infinity Vacuum


... Euro-Pro NV31 Infinity Vacuum

Bissell Power Track Cyclonic Upright Bagless Vacuum.. ..The spin brush works laying down....when upright it won't spin! I cleaned any and all hair from the roller....belt is not broken....but do I need a new belt though? The vac is a few years old bever replaced the belt yet.


You need a new belt. ... Vacuums

Shark Euro-pro EP621 Bagless Upright Vacuum. Q regarding the brush not spinning / after troubleshooting and taking actions listed below, it now spinning for a few secs, but then stopping. Already removed hair, strings, etc. Checked that belt is aligned properly, checked that small wheel that turns belt is working (spins fine when belt removed. Oiled the turning parts a bit, that made it spin better, but still stops. It turns about 3-4 seconds then stops. If I switch it off and on again, I get ag


... Euro-Pro EP621 Bagless Upright Vacuum

Need parts for NV31 vaccum - Euro-Pro NV31 Infinity Vacuum


... Euro-Pro NV31 Infinity Vacuum

Parts for infinty vacuum - Euro-Pro NV31 Infinity Vacuum


Looking for a belt fora infinity vacuum model nv29 ... Euro-Pro NV31 Infinity Vacuum

My Bissell Model 3760-4 is not working properly. The belt has been replaced (and checked 3 times), but the brush bar does not move when the brush motor button is on. The little metal turning piece that turns the belt is turnable with one's finger when the belt is off, but when we put it all back together and turn on the vacuum, the brush bar does not go around and the burning belt smell returns. The portable part of the machine works properly. It's the brush bar. It has been cleared of hair, etc


... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

I have 2 Hoover Wind Tunnel-self propelled bagged vacuums-U6433-900 model.The roller bar does not agitate, the self propelled feature does not work and, in general, the vacuum is not performing well. I have replaced the roller bar, the v belt and the wide belt. The filters have been replaced and it has a new bag. I have had both of these since 2004 and they were fairly expensive $200 each) but if the repairs are prohibitive, I might as well get new vacuums. Suggestions? I just spent $100 for bel


The Hoover WindTunnel self propelled is a machine that we see in our retail stores (Vacuums Unlimited) constantly. The benefit of having a supposed "self-propelled" machine wears of quickly after the numerous time you will need to take this machine ... Hoover Vacuums

My wand is clogged. how do I fix it? - Euro-Pro NV31 Infinity Vacuum


Dismantle and spray with a hose ... Euro-Pro NV31 Infinity Vacuum

Courrois de moteur - Euro-Pro NV31 Infinity Vacuum


... Euro-Pro NV31 Infinity Vacuum

I need a new roller bar or beater brush for infinity vacuum


Hi There,\015\012\015\012Here's a link to that part on our website if you haven't found it already:\015\012\015\012\015\012 ... Euro-Pro NV31 Infinity Vacuum

Shark pet hair power brush - Euro-Pro Vacuums


... Euro-Pro Vacuums

No suction - Euro-Pro NV31 Infinity Vacuum


Cleaning all Turquoise Hose Assy and Post Filter ... Euro-Pro NV31 Infinity Vacuum

Need new brush - Euro-Pro NV22 Shark Navigator Bagless Upright Vacuum


Hi, Here is a tip that I wrote about how to find the parts you need for your SharkHow to Find Shark Parts and Accessories ... Euro-Pro NV22 Shark Navigator Bagless Upright Vacuum

Roller brush does not rotate if there is a belt I can't open that part of the vacuum to look. Vacuum is new but I vacuumed a string that caused the brush to stall for a moment. I could smell like when a belt gets hot or burns it's a surfacemax 300.


You need to replace the belt. Replacement Vacuum Belts ... Vacuums

I have a CT600 power brush that would not power up. Thinking the motor was bad in it, I replaced it with a new CT700 power brush, I am still experiencing the same problem the power brush itself does not seem to be getting electic power, but the Vacuum unit does come on with suction.


First try connecting the power nozzle directly to the hose. If it works, the problem is due to a broken wire or faulty connection in the wands. At least one wand will need to be replaced.\015\012My guess is it's probably due to a broken or di ... Broan-NuTone VX550 Bagged Central System Vacuum

I have the bissell power force bagged upright vacuum and the brush is not turning, I have replaced the belt but the brush will not move but the metal piece that is hooked to the motor that spins the belt and brush is turning but the brush won't, and the belt starts to burn


Sounds like your brush roll is seized. Remove the brush roll (see picture) and make both of the end caps spin freely. If not, replace it and you should be set. *An example of a brush roll* ... Bissell 3522 PowerForce Bagged Upright Vacuum

The bar brush does not spin. I opened the vacuum head and the drive belt to the bar brush is loose. I don't see how you remove the slack from the belt.


You have to have it in the carpet setting in order to put pressure on the v-belt. there is no way to tighten up the v-belt, but i would try to replace the big flat belt. if you haven't changed this belt in over 6 months, i would change it. ( on avera ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1509 seconds