Having problems with your Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum ?

I just got the steam mop but it came without instructions, I don't know how to assemble it. I'm not sure if I'm missing pieces

Answers :

There should only be 3 basic pieces to this machine. The body housing, the top handle and the floor nozzle. The handle attaches to the body with a bolt and a nut and then the floor nozzle is just pushed into the body housing. That should be it.
Repair Help & Product Troubleshooting for Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I just got the steam mop but it came without instructions, I don't know how to assemble it. I'm not sure if I'm missing pieces

There should only be 3 basic pieces to this machine. The body housing, the top handle and the floor nozzle. The handle attaches to the body with a bolt and a nut and then the floor nozzle is just pushed into the body housing. That should be it. ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

I have a Bissell steam shampoorer..I'm not sure where the water goes. I assume in the bladder (soap & water)..there is a little red plastic piece that I don't know where it goes..somewhere in the bladder?..Anyway, no solution is coming out and of course no vacumming up. Cannot find my manual or instructions. I've had it working before..thanks

Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I just got this euro pro shark steam mop. I dont have a manual for it so i dont know much about it. I put water in it and it heats up but when you start to use it. It makes a gurgling kind of sound and steam comes out, but not very much i dont think and on the floor you can't hardly tell where you went over the floor at cuz it's not very wet at all. So is it suppose to make a gurgling sound and should'nt the floor be alittle wetter?

Call Shark. They have good cust. support. ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Hei, I have sewing machine Brother NV500D and got technical problem need to be service/repair. I'm now in Malaysia and don't have techinical/repair service for sewing machine NV500D. This is overseas model. In sewing machine screen display 'F04'. The problem automatic needle not function and part missing. I dont no how to fix this. Can't i got the instruction manual service picture if i can't fix own. please help me. thank you.

... Vacuums

Need instructions how to use Hoover Steam Vac Spin Scrub. I borrowed it from my Sister and she left it with no instruction book or letting me know how to operate it. I put water & cleaner in top tank. That's all I know to do. Do I put any water in bottom tank? I figured not, since that is probably where the water goes when sucked up by vac. Do I leave lid on bottom tank? I usually use a commercial cleaner, and this is very different. I need to know NOW, as I must return it to her today, and I'm

I did have a solution in just a few minutes. Someone responded with a solution that gave me the website where I could go and print the manual in pdf, so did that, and checking instructions I was able to clean my carpets and get the shampooer back to ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Producing steam i just got the shark assembled the mv2010, then it is not doing anything, it vacuumed just fine, but when i put the steam pad on it wouldnt ever produce steam or do anything,it felt like the water was heating up but even after it sat for 20-30 minutes when i pull handle back towards me nothing happens, no lights no steam no nothing, so why wont it work

This link is for the manualhttp://www.sharkclean.com/manual/MV2010_11_IB_ENG_110103.pdf ... Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple

Hoover Steam Vac Dual Tank Bottom Valve Spring Assembly Part Needed

It appears that there is a problem with the o-ring design. The o-ring should maintain a certain OD dimension and keep the spring assembly from pulling throught the hole. I am trying to find the service manual to locate the o-ring part number but hav ... Hoover F7431-900 SteamVac Vacuum

Was given the steam cleaner dont know how to get

Go to poltiaaporetto.com ... Polti Vaporetto 2400 Canister Steam Vacuum

My Dyson vacuum works fine for cleaning the rug but the hose doesnt get any suction at all. I removed the hose and all the parts around it that I could and dont see any clogs or broken pieces. I lost my manual so I dont know if this is addressed, or if there is a switch Im not flipping. Gave it a thorough look but found nothing.

Hi there,Sorry to hear you're having a problem with your DC07. If you have suction through the cleaner head but not through the wand, it sounds as though you have a blockage. Although you say you've already checked for these, you may find ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Polti Vaporetto I have a problem with my steam cleaner. Cannot get steam to come out, and the big valve at the top just keeps turning in both directions. So can't empty it. I have'nt got an instruction manual either as it was given to me. Any suggestions!!! Terena

Dear Terena \015\012\015\012Had the same problem with a polti vaporetto 1500 ( vtt 1500 ) after butchering the big valve on the top I realised that the problem was that there was a blockage in the black pipe that comes from the machine to ... Polti Vaporetto 2400 Canister Steam Vacuum

Delonghi ECO310 BK espresso coffee maker. The unit is leaking from the steam solenoid valve on top of the boiler unit. The Teflon pipe that's retained by the clip is not a tight fit and is able to slide in/out slightly. There is a red gasket present, that sits over the tube, but I suspect that there may be someting else missing from the assembly because of the play in the pipe. Does anyone have a an exploded diagram of the assembly or can confirm that it is just the gasket that is likely to h

... Vacuums

Okay i dont know what model it is all i know its a bissel steam cleaner all white and is on the floor kind and i need directions how to use it

There Is A Model Number On Either A Sticker Or A Plate On There Somewhere If You Can Find It Ill Give You A Link To The Manual. ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

I have a Carpet Express C4 Remanufactured Carpet Steam Cleaner Like Rug Doctor which I've almost completely dismantled, so I need a repair manual / Schematics, for piece by piece assembly

... Vacuums

I have an L shaped piece of metal with a hole at one end that fell out of my hoover elite bagged upright vaccuum cleaner. I repaired the belt but don't know where this metal piece goes. I think it has something to do with the wheel assembly which is replaced and it seems to want to stay there. any thoughts

This metal clip was for the wheel assembly, but not always needed. you can diregard the part if your vac is working correctly with the front wheels. ... Hoover Elite U5061-900 Bagged Upright Vacuum

I just got a ST100P Delonghi steam cleaner from a garage sale and the instructions weren't in the box. where can i find the instructions for it?

... DeLonghi ST100P Steam It Canister Vacuum

My Hoover SteamVac F5915-900 will not pick up water. I've taken the resavor off several times trying to make sure nothing is under it's lid and replaced it as instructed. I don't know wh


Don't know how to use the Hoover Steam Vac F5915-900 and need instructions for it.

Here is a link to the owners manual. Hope it helps, post back.\015\012\015\012http://www.hoover.com/pdfs/manuals/F5915900.pdf ... Hoover Vacuums

I cant find my manuel for my steam cleaner and I want to use the uphostery cleaner dont know how to hook it up can you help me?

In front at the bottom thiers is a peice mine is square pull it up and out, now take the top of the tank lid off. now slide your upholstery attachment in that place where you pulled out the sqare. the open end facing up, now put the tank lid back on ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

My son dropped the Hoover Floormate hard floor cleaner and a black piece with a spring came out. I dont know where it goes, and now the handle wont stay up.

I agree that it is the wheel assembly that's broken. However, my wheel assembly broke in a different place, so I bought a replacement part for $20 or so. I have never figured out how to swap it out...\015\012 \ ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Do not have manual for Vax rapide carpet washer power jet so dont know how to use machine. Have Vax shampooer but not sure of how to use it?

Hi you caan usually get a user manual that you can download from this site\015\012\015\012http://www.vax.co.uk/support/vacuum-cleaner-user-guides\015\012 ... Vacuums

Lost manual dont know were water goes - Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Here you gohttp://www.bissell.com/images/UserGuides/7901_1008.pdf ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I don't have instructions for the Rainbow shampooer. I'm not sure how much water to put in, or whether I put water in both reservoirs. Does anyone know?

Water only goes into the cub in the handle. The dirty water gets put into the bowl on the canister part. ... Rainbow Vacuums

I do not have the manual for use of the carpet cleaning for my Kirby Ultimate G. I need to use it and do not know how to assemble. I would greatly appreciate the instructions.

For free online Kirby vacuum shampoo manual by GoodVac go HERERocky:-) ... Kirby Ultimate G Bagged Upright Vacuum

For the first time, I tried using my Kirby Sentria shampoo attachment. I've lost the manual but found instructions online for making the swap from regular vac to shampoo-er and got it all assembled. The foam laid down just fine, however, when I run the vac back over the foam to pick it up, there is not a stitch of water showing up in the tray. First I thought maybe it was bc I hadn't put that much of the foam/water onto the carpet, but 12 hours later, the carpet is still wet in spots. Clearly

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=638285\015\012Generic problem for all Vacuums\015\012For the first time, I\015\012Posted by MHicks on J ... Vacuums

I dont know how to change a shampoo pump on a bissell shampooer. Do you have instructions for me?

I need instructions how to change a shampoo pump on a 8910 bissel floor cleaner ... Bissell Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0924 seconds